Merge branch 'master' into arm64

README.md

@@ -221,6 +221,10 @@ The following environment variables are supported:
 
     If set, use this directory path as the location of scripts to run when generating images. An absolute or relative path can be given for a location outside the pi-gen directory.
 
+ * `ENABLE_CLOUD_INIT` (Default: `1`)
+
+    If set to `1`, cloud-init and netplan will be installed and configured. This will allow you to configure your Raspberry Pi using cloud-init configuration files. The cloud-init configuration files should be placed in the bootfs or by editing the files in `stage2/04-cloud-init/files`. Cloud-init will be configured to read them on first boot.
+
 A simple example for building Raspberry Pi OS:
 
 ```bash

build.sh

@@ -244,6 +244,8 @@ export QUILT_NO_DIFF_INDEX=1
 export QUILT_NO_DIFF_TIMESTAMPS=1
 export QUILT_REFRESH_ARGS="-p ab"
 
+export ENABLE_CLOUD_INIT=${ENABLE_CLOUD_INIT:-1}
+
 # shellcheck source=scripts/common
 source "${SCRIPT_DIR}/common"
 # shellcheck source=scripts/dependencies_check

stage2/01-sys-tweaks/01-run.sh

@@ -26,11 +26,13 @@ if [ "${USE_QEMU}" = "1" ]; then
 	echo "leaving QEMU mode"
 fi
 
-on_chroot <<EOF
+
+on_chroot <<- EOF
+	systemctl enable rpi-resize
+
 	for GRP in input spi i2c gpio; do
 		groupadd -f -r "\$GRP"
 	done
-
 	for GRP in adm dialout cdrom audio users sudo video games plugdev input gpio spi i2c netdev render; do
 		adduser $FIRST_USER_NAME \$GRP
 	done

stage2/04-cloud-init/00-packages

@@ -0,0 +1 @@
+cloud-init

stage2/04-cloud-init/01-run.sh

@@ -0,0 +1,28 @@
+#!/bin/bash -e
+
+if [ "${ENABLE_CLOUD_INIT}" != "1" ]; then
+	log "Skipping cloud-init stage"
+	exit 0
+fi
+
+install -v -D -m 644 -t "${ROOTFS_DIR}/etc/cloud/cloud.cfg.d/" files/99_raspberry-pi.cfg
+
+# some preseeding without any runtime effect yet
+# install meta-data file for NoCloud data-source to work
+#install -v -m 755 files/meta-data "${ROOTFS_DIR}/boot/firmware/meta-data"
+#install -v -m 755 files/user-data "${ROOTFS_DIR}/boot/firmware/user-data"
+#install -v -m 755 files/network-config "${ROOTFS_DIR}/boot/firmware/network-config" 
+
+# setup default netplan config which will instruct netplan to pass control over to network-manager
+# at boot time. This will make NetworkManager manage all devices and by default. 
+# Any Ethernet device will come up with DHCP, once carrier is detected
+install -v -D -m 600 -t "${ROOTFS_DIR}/lib/netplan/" files/00-network-manager-all.yaml
+
+if [ -n "${FIRST_USER_NAME}" ]; then
+  # set the default user name to the one provided via FIRST_USER_NAME
+  # this will make cloud-init create the user with that name instead of 'pi'
+  sed -i "s/name: pi/name: ${FIRST_USER_NAME}/" "${ROOTFS_DIR}/etc/cloud/cloud.cfg"
+else
+  # remove the users:\n - default section from cloud.cfg
+  sed -i "/^users:/,/^- default/d" "${ROOTFS_DIR}/etc/cloud/cloud.cfg"
+fi

stage2/04-cloud-init/README.txt

@@ -0,0 +1,14 @@
+Cloud-init support for Raspberry Pi OS
+
+Reference for Raspberry Pi custom cloud-init config module: https://cloudinit.readthedocs.io/en/latest/reference/modules.html#raspberry-pi-configuration
+
+- files/network-config is required because otherwise imager would fail to create the correct filesystem entry
+
+- files/user-data same reason and to include some example configurations
+
+- files/meta-data Cloud-init instance configuration
+
+- files/99_raspberry-pi.cfg Cloud-init datasource configuration
+
+- files/00-network-manager-all.yaml Example from netplan docs/ubuntu for handing over control from 
+netplan to NetworkManager by default.

stage2/04-cloud-init/files/00-network-manager-all.yaml

@@ -0,0 +1,3 @@
+network:
+  version: 2
+  renderer: NetworkManager

stage2/04-cloud-init/files/99_raspberry-pi.cfg

@@ -0,0 +1,24 @@
+# configure cloud-init with NoCloud
+
+datasource_list: [ NoCloud, None ]
+datasource:
+  NoCloud:
+    seedfrom: file:///boot/firmware
+
+power_state:
+  delay: now
+  mode: reboot
+  message: Rebooting machine to enable usb gadget mode
+  condition: test -f /etc/modules-load.d/usb-gadget.conf
+
+# Disable SSH host key generation
+# regenerate_ssh_host_keys.service will take care 
+# of it on first boot
+ssh_deletekeys: false
+# Disable generation as it could be that the new keys
+# aren't available yet when the service runs.
+# also they are really only needed for the ssh service
+# which will only run after the keys are already present
+# so we don't schedule cloud-init after key generation
+# as that would delay first boot too much
+ssh_genkeytypes: []

stage2/04-cloud-init/files/meta-data

@@ -0,0 +1,18 @@
+# This is the meta-data configuration file for cloud-init. Please refer to the
+# cloud-init documentation for more information:
+#
+# https://cloudinit.readthedocs.io/
+
+# Set the datasource mode to "local". This ensures that user-data is acted upon
+# prior to bringing up the network (because everything about the datasource is
+# assumed to be local). If you wish to use an HTTP datasource instead, you can
+# change this to "net" or override it on the kernel cmdline (see README).
+dsmode: local
+
+# Specifies the "unique" identifier of the instance. Typically in cloud-init
+# this is generated by the owning cloud and is actually unique (to some
+# degree). Here our data-source is local, so this is just a fixed string.
+# Warning: changing this will cause cloud-init to assume it is running on a
+# "new" instance, and to go through first time setup again (the value is
+# compared to a cached copy).
+instance_id: rpios-image

stage2/04-cloud-init/files/network-config

@@ -0,0 +1,50 @@
+# This file contains a netplan-compatible configuration which cloud-init will
+# apply on first-boot (note: it will *not* update the config after the first
+# boot). Please refer to the cloud-init documentation and the netplan reference
+# for full details:
+#
+# https://netplan.io/reference
+# https://cloudinit.readthedocs.io/en/latest/topics/network-config.html
+# https://cloudinit.readthedocs.io/en/latest/topics/network-config-format-v2.html
+#
+# Please note that the YAML format employed by this file is sensitive to
+# differences in whitespace; if you are editing this file in an editor (like
+# Notepad) which uses literal tabs, take care to only use spaces for
+# indentation. See the following link for more details:
+#
+# https://en.wikipedia.org/wiki/YAML
+#
+# Additionally, please be aware that if your boot sequence depends on active
+# networking (e.g. if your cloud-init configuration pulls packages or SSH
+# keys from the network), you *must* mark at least one interface as required
+# ("optional: false") below. Otherwise, particularly on faster boards,
+# cloud-init will start attempting to use the network before it is ready
+
+# Some additional examples are commented out below
+
+#network:
+#  version: 2
+#
+#  ethernets:
+#    eth0:
+#      dhcp4: true
+#      optional: true
+
+#  wifis:
+#    wlan0:
+#      dhcp4: true
+#      optional: true
+#      access-points:
+#        myhomewifi:
+#          password: "S3kr1t"
+#        myworkwifi:
+#          password: "correct battery horse staple"
+#        workssid:
+#          auth:
+#            key-management: eap
+#            method: peap
+#            identity: "me@example.com"
+#            password: "passw0rd"
+#            ca-certificate: /etc/my_ca.pem
+
+#      regulatory-domain: GB

stage2/04-cloud-init/files/user-data

@@ -0,0 +1,102 @@
+#cloud-config
+
+# This is the user-data configuration file for cloud-init. By default this sets
+# up an initial user called "ubuntu" with password "ubuntu", which must be
+# changed at first login. However, many additional actions can be initiated on
+# first boot from this file. The cloud-init documentation has more details:
+#
+# https://cloudinit.readthedocs.io/
+#
+# Please note that the YAML format employed by this file is sensitive to
+# differences in whitespace; if you are editing this file in an editor (like
+# Notepad) which uses literal tabs, take care to only use spaces for
+# indentation. See the following link for more details:
+#
+# https://en.wikipedia.org/wiki/YAML
+#
+# Some additional examples are provided in comments below the default
+# configuration.
+
+## Set the system's hostname. Please note that, unless you have a local DNS
+## setup where the hostname is derived from DHCP requests (as with dnsmasq),
+## setting the hostname here will not make the machine reachable by this name.
+## You may also wish to install avahi-daemon (see the "packages:" key below)
+## to make your machine reachable by the .local domain
+#hostname: raspberrypi
+
+## Set up the keyboard layout. See localectl(1), in particular the various
+## list-x11-* sub-commands, to determine the available models, layouts,
+## variants, and options
+#keyboard:
+#  model: pc105
+#  layout: gb
+#  variant:
+#  options: ctrl:nocaps
+
+# Controls password authentication with the SSH daemon; the default here can
+# prevent logging into SSH with a password. Changing this is a security risk
+# and you should at the very least ensure a different default password is
+# specified above
+#ssh_pwauth: false
+
+## On first boot, use ssh-import-id to give the specific users SSH access to
+## the default user
+#ssh_import_id:
+#- lp:my_launchpad_username
+#- gh:my_github_username
+
+## Add users and groups to the system, and import keys with the ssh-import-id
+## utility
+#groups:
+#- robot: [robot]
+#- robotics: [robot]
+#- pi
+#
+#users:
+#- default
+#- name: robot
+#  gecos: Mr. Robot
+#  primary_group: robot
+#  groups: users
+#  ssh_import_id: foobar
+#  lock_passwd: false
+#  passwd: $5$hkui88$nvZgIle31cNpryjRfO9uArF7DYiBcWEnjqq7L1AQNN3
+
+## Update apt database and upgrade packages on first boot
+#package_update: true
+#package_upgrade: true
+
+## Install additional packages on first boot
+#packages:
+#- avahi-daemon
+#- rng-tools
+#- python3-gpiozero
+#- [python3-serial, 3.5-1]
+
+## Write arbitrary files to the file-system (including binaries!)
+#write_files:
+#- path: /etc/default/console-setup
+#  content: |
+#    # Consult the console-setup(5) manual page.
+#    ACTIVE_CONSOLES="/dev/tty[1-6]"
+#    CHARMAP="UTF-8"
+#    VIDEOMODE=
+#    FONT="Lat15-Terminus18x10.psf.gz"
+#    FONTFACE=
+#    FONTSIZE=
+#    CODESET="Lat15"
+#  permissions: '0644'
+#  owner: root:root
+#- encoding: gzip
+#  path: /root/Makefile
+#  content: !!binary |
+#    H4sICF2DTWIAA01ha2VmaWxlAFNWCM8syVBILMjPyU/PTC1WKMlXiPB2dlFQNjSx5MpNteLi
+#    dLDiSoRQxYl5KeWZyRkgXrSCkoqKRmaKgm6pppKCbmqhgoFCrIKamkK1QmpyRr6Ckn92YqWS
+#    NdC80uQMBZhOa4VahZoaqIrwjMQSewXfxOxUhcwShcr80qLi1Jw0RSUuAIYfEJmVAAAA
+#  owner: root:root
+#  permissions: '0644'
+
+## Run arbitrary commands at rc.local like time
+#runcmd:
+#- [ ls, -l, / ]
+#- [ sh, -xc, "echo $(date) ': hello world!'" ]