Merge branch 'arm64' into showpiece

Dockerfile

@@ -6,7 +6,7 @@ ENV DEBIAN_FRONTEND=noninteractive
 RUN apt-get -y update && \
     apt-get -y install --no-install-recommends \
         git vim parted \
-        quilt coreutils qemu-user-static debootstrap zerofree zip dosfstools \
+        quilt coreutils qemu-user-static debootstrap zerofree zip dosfstools e2fsprogs\
         libarchive-tools libcap2-bin rsync grep udev xz-utils curl xxd file kmod bc \
         binfmt-support ca-certificates fdisk gpg pigz arch-test \
     && rm -rf /var/lib/apt/lists/*

README.md

@@ -20,9 +20,9 @@ below.
 To install the required dependencies for `pi-gen` you should run:
 
 ```bash
-apt-get install coreutils quilt parted qemu-user-static debootstrap zerofree zip \
+apt install coreutils quilt parted qemu-user-static debootstrap zerofree zip \
-dosfstools libarchive-tools libcap2-bin grep rsync xz-utils file git curl bc \
+dosfstools e2fsprogs libarchive-tools libcap2-bin grep rsync xz-utils file git curl bc \
-gpg pigz xxd arch-test bmap-tools
+gpg pigz xxd arch-test bmap-tools kmod
 ```
 
 The file `depends` contains a list of tools needed.  The format of this
@@ -55,7 +55,7 @@ environment variables.
 
 The following environment variables are supported:
 
- * `IMG_NAME` (Default: `raspios-$RELEASE-$ARCH`, for example: `raspios-bookworm-armhf`)
+ * `IMG_NAME` (Default: `raspios-$RELEASE-$ARCH`, for example: `raspios-trixie-armhf`)
 
    The name of the image to build with the current stage directories. Use this
    variable to set the root name of your OS, eg `IMG_NAME=Frobulator`.
@@ -66,7 +66,7 @@ The following environment variables are supported:
    The release name to use in `/etc/issue.txt`. The default should only be used
    for official Raspberry Pi builds.
 
-* `RELEASE` (Default: `bookworm`)
+* `RELEASE` (Default: `trixie`)
 
    The release version to build images against. Valid values are any supported
    Debian release. However, since different releases will have different sets of
@@ -174,6 +174,8 @@ The following environment variables are supported:
    a name chosen by the final user. This security feature is designed to prevent shipping images
    with a default username and help prevent malicious actors from taking over your devices.
 
+   If the FIRST_USER_NAME is set to `pi` and no `FIRST_USER_PASS` is set, the setup wizard will be launched on first boot to allow the user to set the password.
+
  * `FIRST_USER_PASS` (Default: unset)
 
    Password for the first user. If unset, the account is locked.
@@ -219,6 +221,10 @@ The following environment variables are supported:
 
     If set, use this directory path as the location of scripts to run when generating images. An absolute or relative path can be given for a location outside the pi-gen directory.
 
+ * `ENABLE_CLOUD_INIT` (Default: `1`)
+
+    If set to `1`, cloud-init and netplan will be installed and configured. This will allow you to configure your Raspberry Pi using cloud-init configuration files. The cloud-init configuration files should be placed in the bootfs or by editing the files in `stage2/04-cloud-init/files`. Cloud-init will be configured to read them on first boot.
+
 A simple example for building Raspberry Pi OS:
 
 ```bash

build-docker.sh

@@ -82,7 +82,7 @@ fi
 # Modify original build-options to allow config file to be mounted in the docker container
 BUILD_OPTS="$(echo "${BUILD_OPTS:-}" | sed -E 's@\-c\s?([^ ]+)@-c /config@')"
 
-${DOCKER} build --build-arg BASE_IMAGE=debian:bookworm -t pi-gen "${DIR}"
+${DOCKER} build --build-arg BASE_IMAGE=debian:trixie -t pi-gen "${DIR}"
 
 if [ "${CONTAINER_EXISTS}" != "" ]; then
   DOCKER_CMDLINE_NAME="${CONTAINER_NAME}_cont"
@@ -142,7 +142,7 @@ time ${DOCKER} run \
   pi-gen \
   bash -e -o pipefail -c "
     dpkg-reconfigure qemu-user-static &&
-    # binfmt_misc is sometimes not mounted with debian bookworm image
+    # binfmt_misc is sometimes not mounted with debian trixie image
     (mount binfmt_misc -t binfmt_misc /proc/sys/fs/binfmt_misc || true) &&
     cd /pi-gen; ./build.sh ${BUILD_OPTS} &&
     rsync -av work/*/build.log deploy/

build.sh

@@ -68,6 +68,8 @@ EOF
 			log "Begin ${SUB_STAGE_DIR}/${i}-run.sh"
 			./${i}-run.sh
 			log "End ${SUB_STAGE_DIR}/${i}-run.sh"
+		elif [ -f ${i}-run.sh ]; then
+			log "Skip ${SUB_STAGE_DIR}/${i}-run.sh (not executable)"
 		fi
 		if [ -f ${i}-run-chroot.sh ]; then
 			log "Begin ${SUB_STAGE_DIR}/${i}-run-chroot.sh"
@@ -176,7 +178,7 @@ export PI_GEN_REPO=${PI_GEN_REPO:-https://github.com/RPi-Distro/pi-gen}
 export PI_GEN_RELEASE=${PI_GEN_RELEASE:-Raspberry Pi reference}
 
 export ARCH=arm64
-export RELEASE=${RELEASE:-bookworm} # Don't forget to update stage0/prerun.sh
+export RELEASE=${RELEASE:-trixie} # Don't forget to update stage0/prerun.sh
 export IMG_NAME="${IMG_NAME:-raspios-$RELEASE-$ARCH}"
 
 export USE_QEMU="${USE_QEMU:-0}"
@@ -242,6 +244,8 @@ export QUILT_NO_DIFF_INDEX=1
 export QUILT_NO_DIFF_TIMESTAMPS=1
 export QUILT_REFRESH_ARGS="-p ab"
 
+export ENABLE_CLOUD_INIT=${ENABLE_CLOUD_INIT:-1}
+
 # shellcheck source=scripts/common
 source "${SCRIPT_DIR}/common"
 # shellcheck source=scripts/dependencies_check

depends

@@ -6,6 +6,7 @@ debootstrap
 zerofree
 zip
 mkdosfs:dosfstools
+mke2fs:e2fsprogs
 capsh:libcap2-bin
 bsdtar:libarchive-tools
 grep

export-image/05-finalise/01-run.sh

@@ -5,14 +5,17 @@ INFO_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.info"
 SBOM_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.sbom"
 BMAP_FILE="${STAGE_WORK_DIR}/${IMG_FILENAME}${IMG_SUFFIX}.bmap"
 
-on_chroot << EOF
+on_chroot <<- EOF
-update-initramfs -k all -c
+	update-initramfs -k all -c
-if [ -x /etc/init.d/fake-hwclock ]; then
+	if hash hardlink 2>/dev/null; then
-	/etc/init.d/fake-hwclock stop
+		hardlink -t /usr/share/doc
-fi
+	fi
-if hash hardlink 2>/dev/null; then
+	if [ -f /usr/lib/systemd/system/apt-listchanges.service ]; then
-	hardlink -t /usr/share/doc
+		python3 -m apt_listchanges.populate_database --profile apt
-fi
+		systemctl disable apt-listchanges.timer
+	fi
+	install -m 755 -o systemd-timesync -g systemd-timesync -d /var/lib/systemd/timesync
+	install -m 644 -o systemd-timesync -g systemd-timesync /dev/null /var/lib/systemd/timesync/clock
 EOF
 
 if [ -f "${ROOTFS_DIR}/etc/initramfs-tools/update-initramfs.conf" ]; then
@@ -51,7 +54,7 @@ rm -f "${ROOTFS_DIR}"/usr/share/icons/*/icon-theme.cache
 
 rm -f "${ROOTFS_DIR}/var/lib/dbus/machine-id"
 
-true > "${ROOTFS_DIR}/etc/machine-id"
+echo "uninitialized" > "${ROOTFS_DIR}/etc/machine-id"
 
 ln -nsf /proc/mounts "${ROOTFS_DIR}/etc/mtab"
 

export-noobs/00-release/files/release_notes.txt

@@ -1,5 +1,39 @@
 UNRELEASED:
-  *
+  * Based on Debian Trixie release
+  * New plugin-based Control Centre application
+  * Plugins for same built from existing Raspberry Pi Configuration, Appearance
+    Settings, Mouse and Keyboard Settings, Screen Configuration and Printer
+    Settings applications; code and functionality identical
+  * New icon theme, PiXtrix
+  * New GTK themes, PiXtrix (standard) and PiXonyx (dark)
+  * New desktop wallpapers
+  * New system font, Nunito Sans Light
+  * lxpanel replaced with forked lxpanel-pi; unsupported plugins removed
+  * lxpanelctl replaced with lxpanelctl-pi command-line application
+  * New System Monitor plugin added to taskbar for power and other warnings
+  * New shared Clock plugin added for wf-panel-pi and lxpanel-pi taskbars
+  * Main menu shortcuts to Raspberry Pi website removed and replaced with
+    pre-loaded bookmarks in Chromium and Firefox
+  * Main menu shortcut to Raspberry Pi Beginner's Guide added
+  * Bookshelf application now displays contributor-only titles and includes
+    option to contribute to unlock them
+  * SenseHAT Emulator reinstated in Recommended Software
+  * labwc updated to version 0.8.4
+  * General keyboard control improvements in GTK applications
+  * International translations of user guides installed by startup wizard as
+    appropriate
+  * raspberrypi-ui-mods package removed - replaced with structured metapackage,
+    rpd-metas
+  * Shutdown helper does not offer lock screen option when invoked by a user
+    who has no password set
+  * Chromium updated to version 140.0.7339.185
+  * Firefox updated to version 142.0.1
+  * Debian Reference no longer included
+  * Alacarte menu editor no longer included
+  * Remote GPIO option removed from Control Centre
+  * Added rpi-keyboard-config and rpi-keyboard-fw-update
+  * Raspberry Pi firmware 676efed1194de38975889a34276091da1f5aadd3
+  * Linux kernel 6.12.47 - 359f37f0faefb712add32a39f98751aea67d5c1f
 2025-05-13:
   * Setting touchscreen in Screen Configuration does not delete default associations for greeter
   * Bug fix - wizard keyboard setting correctly transferred into desktop

scripts/common

@@ -20,6 +20,9 @@ bootstrap(){
 
 	capsh $CAPSH_ARG -- -c "'${BOOTSTRAP_CMD}' $BOOTSTRAP_STR" || true
 
+	# https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1050719
+	rm -f wget-log*
+
 	if [ -d "$2/debootstrap" ] && ! rmdir "$2/debootstrap"; then
 		cp "$2/debootstrap/debootstrap.log" "${STAGE_WORK_DIR}"
 		log "bootstrap failed: please check ${STAGE_WORK_DIR}/debootstrap.log"

stage0/00-configure-apt/00-run.sh

@@ -1,9 +1,10 @@
 #!/bin/bash -e
 
-install -m 644 files/sources.list "${ROOTFS_DIR}/etc/apt/"
+true > "${ROOTFS_DIR}/etc/apt/sources.list"
-install -m 644 files/raspi.list "${ROOTFS_DIR}/etc/apt/sources.list.d/"
+install -m 644 files/debian.sources "${ROOTFS_DIR}/etc/apt/sources.list.d/"
-sed -i "s/RELEASE/${RELEASE}/g" "${ROOTFS_DIR}/etc/apt/sources.list"
+install -m 644 files/raspi.sources "${ROOTFS_DIR}/etc/apt/sources.list.d/"
-sed -i "s/RELEASE/${RELEASE}/g" "${ROOTFS_DIR}/etc/apt/sources.list.d/raspi.list"
+sed -i "s/RELEASE/${RELEASE}/g" "${ROOTFS_DIR}/etc/apt/sources.list.d/debian.sources"
+sed -i "s/RELEASE/${RELEASE}/g" "${ROOTFS_DIR}/etc/apt/sources.list.d/raspi.sources"
 
 if [ -n "$APT_PROXY" ]; then
 	install -m 644 files/51cache "${ROOTFS_DIR}/etc/apt/apt.conf.d/51cache"
@@ -19,8 +20,7 @@ else
 	rm -f "${ROOTFS_DIR}/etc/apt/sources.list.d/00-temp.list"
 fi
 
-cat files/raspberrypi.gpg.key | gpg --dearmor > "${STAGE_WORK_DIR}/raspberrypi-archive-stable.gpg"
+install -m 644 files/raspberrypi-archive-keyring.pgp "${ROOTFS_DIR}/usr/share/keyrings/"
-install -m 644 "${STAGE_WORK_DIR}/raspberrypi-archive-stable.gpg" "${ROOTFS_DIR}/etc/apt/trusted.gpg.d/"
 on_chroot <<- \EOF
 	ARCH="$(dpkg --print-architecture)"
 	if [ "$ARCH" = "armhf" ]; then

stage0/00-configure-apt/files/debian.sources

@@ -0,0 +1,11 @@
+Types: deb
+URIs: http://deb.debian.org/debian/
+Suites: RELEASE RELEASE-updates
+Components: main contrib non-free non-free-firmware
+Signed-By: /usr/share/keyrings/debian-archive-keyring.pgp
+
+Types: deb
+URIs: http://deb.debian.org/debian-security/
+Suites: RELEASE-security
+Components: main contrib non-free non-free-firmware
+Signed-By: /usr/share/keyrings/debian-archive-keyring.pgp

stage0/00-configure-apt/files/raspberrypi.gpg.key

@@ -1,30 +0,0 @@
------BEGIN PGP PUBLIC KEY BLOCK-----
-Version: GnuPG v1.4.12 (GNU/Linux)
-
-mQENBE/d7o8BCACrwqQacGJfn3tnMzGui6mv2lLxYbsOuy/+U4rqMmGEuo3h9m92
-30E2EtypsoWczkBretzLUCFv+VUOxaA6sV9+puTqYGhhQZFuKUWcG7orf7QbZRuu
-TxsEUepW5lg7MExmAu1JJzqM0kMQX8fVyWVDkjchZ/is4q3BPOUCJbUJOsE+kK/6
-8kW6nWdhwSAjfDh06bA5wvoXNjYoDdnSZyVdcYCPEJXEg5jfF/+nmiFKMZBraHwn
-eQsepr7rBXxNcEvDlSOPal11fg90KXpy7Umre1UcAZYJdQeWcHu7X5uoJx/MG5J8
-ic6CwYmDaShIFa92f8qmFcna05+lppk76fsnABEBAAG0IFJhc3BiZXJyeSBQaSBB
-cmNoaXZlIFNpZ25pbmcgS2V5iQE4BBMBAgAiBQJP3e6PAhsDBgsJCAcDAgYVCAIJ
-CgsEFgIDAQIeAQIXgAAKCRCCsSmSf6MwPk6vB/9pePB3IukU9WC9Bammh3mpQTvL
-OifbkzHkmAYxzjfK6D2I8pT0xMxy949+ThzJ7uL60p6T/32ED9DR3LHIMXZvKtuc
-mQnSiNDX03E2p7lIP/htoxW2hDP2n8cdlNdt0M9IjaWBppsbO7IrDppG2B1aRLni
-uD7v8bHRL2mKTtIDLX42Enl8aLAkJYgNWpZyPkDyOqamjijarIWjGEPCkaURF7g4
-d44HvYhpbLMOrz1m6N5Bzoa5+nq3lmifeiWKxioFXU+Hy5bhtAM6ljVb59hbD2ra
-X4+3LXC9oox2flmQnyqwoyfZqVgSQa0B41qEQo8t1bz6Q1Ti7fbMLThmbRHiuQEN
-BE/d7o8BCADNlVtBZU63fm79SjHh5AEKFs0C3kwa0mOhp9oas/haDggmhiXdzeD3
-49JWz9ZTx+vlTq0s+I+nIR1a+q+GL+hxYt4HhxoA6vlDMegVfvZKzqTX9Nr2VqQa
-S4Kz3W5ULv81tw3WowK6i0L7pqDmvDqgm73mMbbxfHD0SyTt8+fk7qX6Ag2pZ4a9
-ZdJGxvASkh0McGpbYJhk1WYD+eh4fqH3IaeJi6xtNoRdc5YXuzILnp+KaJyPE5CR
-qUY5JibOD3qR7zDjP0ueP93jLqmoKltCdN5+yYEExtSwz5lXniiYOJp8LWFCgv5h
-m8aYXkcJS1xVV9Ltno23YvX5edw9QY4hABEBAAGJAR8EGAECAAkFAk/d7o8CGwwA
-CgkQgrEpkn+jMD5Figf/dIC1qtDMTbu5IsI5uZPX63xydaExQNYf98cq5H2fWF6O
-yVR7ERzA2w33hI0yZQrqO6pU9SRnHRxCFvGv6y+mXXXMRcmjZG7GiD6tQWeN/3wb
-EbAn5cg6CJ/Lk/BI4iRRfBX07LbYULCohlGkwBOkRo10T+Ld4vCCnBftCh5x2OtZ
-TOWRULxP36y2PLGVNF+q9pho98qx+RIxvpofQM/842ZycjPJvzgVQsW4LT91KYAE
-4TVf6JjwUM6HZDoiNcX6d7zOhNfQihXTsniZZ6rky287htsWVDNkqOi5T3oTxWUo
-m++/7s3K3L0zWopdhMVcgg6Nt9gcjzqN1c0gy55L/g==
-=mNSj
------END PGP PUBLIC KEY BLOCK-----

stage0/00-configure-apt/files/raspi.list

@@ -1,3 +0,0 @@
-deb http://archive.raspberrypi.com/debian/ RELEASE main
-# Uncomment line below then 'apt-get update' to enable 'apt-get source'
-#deb-src http://archive.raspberrypi.com/debian/ RELEASE main

stage0/00-configure-apt/files/raspi.sources

@@ -0,0 +1,5 @@
+Types: deb
+URIs: http://archive.raspberrypi.com/debian/
+Suites: RELEASE
+Components: main
+Signed-By: /usr/share/keyrings/raspberrypi-archive-keyring.pgp

stage0/00-configure-apt/files/sources.list

@@ -1,7 +0,0 @@
-deb http://deb.debian.org/debian RELEASE main contrib non-free non-free-firmware
-deb http://deb.debian.org/debian-security/ RELEASE-security main contrib non-free non-free-firmware
-deb http://deb.debian.org/debian RELEASE-updates main contrib non-free non-free-firmware
-# Uncomment deb-src lines below then 'apt-get update' to enable 'apt-get source'
-#deb-src http://deb.debian.org/debian RELEASE main contrib non-free non-free-firmware
-#deb-src http://deb.debian.org/debian-security/ RELEASE-security main contrib non-free non-free-firmware
-#deb-src http://deb.debian.org/debian RELEASE-updates main contrib non-free non-free-firmware

stage0/prerun.sh

@@ -1,6 +1,6 @@
 #!/bin/bash -e
 
-if [ "$RELEASE" != "bookworm" ]; then
+if [ "$RELEASE" != "trixie" ]; then
 	echo "WARNING: RELEASE does not match the intended option for this branch."
 	echo "         Please check the relevant README.md section."
 fi

stage1/00-boot-files/files/cmdline.txt

@@ -1 +1 @@
-console=serial0,115200 console=tty1 root=ROOTDEV rootfstype=ext4 fsck.repair=yes rootwait
+console=serial0,115200 console=tty1 root=ROOTDEV rootfstype=ext4 fsck.repair=yes rootwait resize

stage1/01-sys-tweaks/00-patches/01-bashrc.diff

@@ -1,6 +1,6 @@
---- a/rootfs/etc/skel/.bashrc
+--- stage1.orig/rootfs/etc/skel/.bashrc
-+++ b/rootfs/etc/skel/.bashrc
++++ stage1/rootfs/etc/skel/.bashrc
-@@ -43,7 +43,7 @@
+@@ -43,7 +43,7 @@ esac
  # uncomment for a colored prompt, if the terminal has the capability; turned
  # off by default to not distract the user: the focus in a terminal window
  # should be on the output of commands, not on the prompt
@@ -9,7 +9,7 @@
  
  if [ -n "$force_color_prompt" ]; then
      if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
-@@ -57,7 +57,7 @@
+@@ -57,7 +57,7 @@ if [ -n "$force_color_prompt" ]; then
  fi
  
  if [ "$color_prompt" = yes ]; then
@@ -18,7 +18,7 @@
  else
      PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
  fi
-@@ -79,9 +79,9 @@
+@@ -79,9 +79,9 @@ if [ -x /usr/bin/dircolors ]; then
      #alias dir='dir --color=auto'
      #alias vdir='vdir --color=auto'
  

stage1/01-sys-tweaks/00-run.sh

@@ -12,5 +12,3 @@ if [ -n "${FIRST_USER_PASS}" ]; then
 fi
 echo "root:root" | chpasswd
 EOF
-
-

stage2/01-sys-tweaks/00-debconf

@@ -4,9 +4,6 @@ console-setup   console-setup/charmap47 select  UTF-8
 # Character set to support:
 # Choices: . Arabic, # Armenian, # Cyrillic - KOI8-R and KOI8-U, # Cyrillic - non-Slavic languages, # Cyrillic - Slavic languages (also Bosnian and Serbian Latin), . Ethiopic, # Georgian, # Greek, # Hebrew, # Lao, # Latin1 and Latin5 - western Europe and Turkic languages, # Latin2 - central Europe and Romanian, # Latin3 and Latin8 - Chichewa; Esperanto; Irish; Maltese and Welsh, # Latin7 - Lithuanian; Latvian; Maori and Marshallese, . Latin - Vietnamese, # Thai, . Combined - Latin; Slavic Cyrillic; Hebrew; basic Arabic, . Combined - Latin; Slavic Cyrillic; Greek, . Combined - Latin; Slavic and non-Slavic Cyrillic, Guess optimal character set
 console-setup   console-setup/codeset47 select  Guess optimal character set
-# Font for the console:
-# Choices: Fixed, Goha, GohaClassic, Terminus, TerminusBold, TerminusBoldVGA, VGA, Do not change the boot/kernel font, Let the system select a suitable font
-console-setup   console-setup/fontface47        select  Do not change the boot/kernel font
 # Key to function as AltGr:
 # Choices: The default for the keyboard layout, No AltGr key, Right Alt (AltGr), Right Control, Right Logo key, Menu key, Left Alt, Left Logo key, Keypad Enter key, Both Logo keys, Both Alt keys
 keyboard-configuration	keyboard-configuration/altgr	select	The default for the keyboard layout

stage2/01-sys-tweaks/00-packages

@@ -5,18 +5,17 @@ python-is-python3
 v4l-utils
 gpiod python3-libgpiod
 python3-gpiozero
-pigpio python3-pigpio raspi-gpio python3-rpi-lgpio
+python3-rpi-lgpio
 python3-spidev
 python3-smbus2
 avahi-daemon
 lua5.1
 luajit
 ca-certificates curl
-fake-hwclock nfs-common usbutils
+usbutils
 dosfstools
-dphys-swapfile
+rpi-swap rpi-loop-utils
 raspberrypi-sys-mods
-pi-bluetooth
 apt-listchanges
 usb-modeswitch
 libpam-chksshpwd
@@ -25,7 +24,6 @@ libmtp-runtime
 rsync
 htop
 man-db
-policykit-1
 ssh-import-id
 ethtool
 ntfs-3g
@@ -37,3 +35,8 @@ unzip zip p7zip-full
 file
 kms++-utils
 python3-venv
+bluez bluez-firmware
+rpi-keyboard-config
+rpi-keyboard-fw-update
+rpi-usb-gadget
+rpi-connect-lite

stage2/01-sys-tweaks/00-patches/01-useradd.diff

@@ -1,9 +1,7 @@
-Index: jessie-stage2/rootfs/etc/default/useradd
+--- stage2.orig/rootfs/etc/default/useradd
-===================================================================
++++ stage2/rootfs/etc/default/useradd
---- jessie-stage2.orig/rootfs/etc/default/useradd
-+++ jessie-stage2/rootfs/etc/default/useradd
 @@ -5,7 +5,7 @@
- # Similar to DHSELL in adduser. However, we use "sh" here because
+ # Similar to DSHELL in adduser. However, we use "sh" here because
  # useradd is a low level utility and should be as general
  # as possible
 -SHELL=/bin/sh

stage2/01-sys-tweaks/00-patches/02-swap.diff

@@ -1,13 +0,0 @@
-Index: jessie-stage2/rootfs/etc/dphys-swapfile
-===================================================================
---- jessie-stage2.orig/rootfs/etc/dphys-swapfile
-+++ jessie-stage2/rootfs/etc/dphys-swapfile
-@@ -13,7 +13,7 @@
- 
- # set size to absolute value, leaving empty (default) then uses computed value
- #   you most likely don't want this, unless you have an special disk situation
--#CONF_SWAPSIZE=
-+CONF_SWAPSIZE=512
- 
- # set size to computed value, this times RAM size, dynamically adapts,
- #   guarantees that there is enough swap without wasting disk space on excess

stage2/01-sys-tweaks/00-patches/04-inputrc.diff

@@ -1,8 +1,6 @@
-Index: jessie-stage2/rootfs/etc/inputrc
+--- stage2.orig/rootfs/etc/inputrc
-===================================================================
++++ stage2/rootfs/etc/inputrc
---- jessie-stage2.orig/rootfs/etc/inputrc
+@@ -69,3 +69,7 @@ $endif
-+++ jessie-stage2/rootfs/etc/inputrc
-@@ -65,3 +65,7 @@ $endif
  # "\e[F": end-of-line
  
  $endif

stage2/01-sys-tweaks/00-patches/05-path.diff

@@ -1,8 +1,6 @@
-Index: jessie-stage2/rootfs/etc/login.defs
+--- stage2.orig/rootfs/etc/login.defs
-===================================================================
++++ stage2/rootfs/etc/login.defs
---- jessie-stage2.orig/rootfs/etc/login.defs
+@@ -60,7 +60,7 @@ HUSHLOGIN_FILE	.hushlogin
-+++ jessie-stage2/rootfs/etc/login.defs
-@@ -100,7 +100,7 @@ HUSHLOGIN_FILE	.hushlogin
  #
  # (they are minimal, add the rest in the shell startup files)
  ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
@@ -10,13 +8,11 @@ Index: jessie-stage2/rootfs/etc/login.defs
 +ENV_PATH        PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
  
  #
- # Terminal permissions
+ # Terminal permissions for terminals after login(1).
-Index: jessie-stage2/rootfs/etc/profile
+--- stage2.orig/rootfs/etc/profile
-===================================================================
++++ stage2/rootfs/etc/profile
---- jessie-stage2.orig/rootfs/etc/profile
-+++ jessie-stage2/rootfs/etc/profile
 @@ -4,7 +4,7 @@
- if [ "`id -u`" -eq 0 ]; then
+ if [ "$(id -u)" -eq 0 ]; then
    PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
  else
 -  PATH="/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games"

stage2/01-sys-tweaks/00-patches/07-resize-init.diff

@@ -1,5 +0,0 @@
---- stage2.orig/rootfs/boot/firmware/cmdline.txt
-+++ stage2/rootfs/boot/firmware/cmdline.txt
-@@ -1 +1 @@
--console=serial0,115200 console=tty1 root=ROOTDEV rootfstype=ext4 fsck.repair=yes rootwait
-+console=serial0,115200 console=tty1 root=ROOTDEV rootfstype=ext4 fsck.repair=yes rootwait quiet init=/usr/lib/raspberrypi-sys-mods/firstboot

stage2/01-sys-tweaks/00-patches/series

@@ -1,5 +1,3 @@
 01-useradd.diff
-02-swap.diff
 04-inputrc.diff
 05-path.diff
-07-resize-init.diff

stage2/01-sys-tweaks/01-run.sh

@@ -1,11 +1,5 @@
 #!/bin/bash -e
 
-install -m 755 files/resize2fs_once	"${ROOTFS_DIR}/etc/init.d/"
-
-install -m 644 files/50raspi		"${ROOTFS_DIR}/etc/apt/apt.conf.d/"
-
-install -m 644 files/console-setup   	"${ROOTFS_DIR}/etc/default/"
-
 if [ -n "${PUBKEY_SSH_FIRST_USER}" ]; then
 	install -v -m 0700 -o 1000 -g 1000 -d "${ROOTFS_DIR}"/home/"${FIRST_USER_NAME}"/.ssh
 	echo "${PUBKEY_SSH_FIRST_USER}" >"${ROOTFS_DIR}"/home/"${FIRST_USER_NAME}"/.ssh/authorized_keys
@@ -19,37 +13,29 @@ s/^#?[[:blank:]]*PasswordAuthentication[[:blank:]]*yes[[:blank:]]*$/PasswordAuth
 fi
 
 on_chroot << EOF
-systemctl disable hwclock.sh
-systemctl disable nfs-common
-systemctl disable rpcbind
 if [ "${ENABLE_SSH}" == "1" ]; then
 	systemctl enable ssh
 else
 	systemctl disable ssh
 fi
-systemctl enable regenerate_ssh_host_keys
 EOF
 
 if [ "${USE_QEMU}" = "1" ]; then
 	echo "enter QEMU mode"
 	install -m 644 files/90-qemu.rules "${ROOTFS_DIR}/etc/udev/rules.d/"
-	on_chroot << EOF
-systemctl disable resize2fs_once
-EOF
 	echo "leaving QEMU mode"
-else
-	on_chroot << EOF
-systemctl enable resize2fs_once
-EOF
 fi
 
-on_chroot <<EOF
+
-for GRP in input spi i2c gpio; do
+on_chroot <<- EOF
-	groupadd -f -r "\$GRP"
+	systemctl enable rpi-resize
-done
+
-for GRP in adm dialout cdrom audio users sudo video games plugdev input gpio spi i2c netdev render; do
+	for GRP in input spi i2c gpio; do
-  adduser $FIRST_USER_NAME \$GRP
+		groupadd -f -r "\$GRP"
-done
+	done
+	for GRP in adm dialout cdrom audio users sudo video games plugdev input gpio spi i2c netdev render; do
+		adduser $FIRST_USER_NAME \$GRP
+	done
 EOF
 
 if [ -f "${ROOTFS_DIR}/etc/sudoers.d/010_pi-nopasswd" ]; then
@@ -66,13 +52,12 @@ EOF
 
 rm -f "${ROOTFS_DIR}/etc/ssh/"ssh_host_*_key*
 
+sed -i 's/^FONTFACE=.*/FONTFACE=""/;s/^FONTSIZE=.*/FONTSIZE=""/' "${ROOTFS_DIR}/etc/default/console-setup"
 sed -i "s/PLACEHOLDER//" "${ROOTFS_DIR}/etc/default/keyboard"
 on_chroot << EOF
-DEBIAN_FRONTEND=noninteractive dpkg-reconfigure keyboard-configuration
+DEBIAN_FRONTEND=noninteractive dpkg-reconfigure keyboard-configuration console-setup
 EOF
 
-sed -i 's/^#\?Storage=.*/Storage=volatile/' "${ROOTFS_DIR}/etc/systemd/journald.conf"
-
 if [ -e "${ROOTFS_DIR}/etc/avahi/avahi-daemon.conf" ]; then
   sed -i 's/^#\?publish-workstation=.*/publish-workstation=yes/' "${ROOTFS_DIR}/etc/avahi/avahi-daemon.conf"
 fi

stage2/01-sys-tweaks/files/50raspi

@@ -1,5 +0,0 @@
-# never use pdiffs. Current implementation is very slow on low-powered devices
-Acquire::PDiffs "0";
-
-# download up to 5 pdiffs:
-#Acquire::PDiffs::FileLimit "5";

stage2/01-sys-tweaks/files/console-setup

@@ -1,16 +0,0 @@
-# CONFIGURATION FILE FOR SETUPCON
-
-# Consult the console-setup(5) manual page.
-
-ACTIVE_CONSOLES="/dev/tty[1-6]"
-
-CHARMAP="UTF-8"
-
-CODESET="guess"
-FONTFACE=""
-FONTSIZE=""
-
-VIDEOMODE=
-
-# The following is an example how to use a braille font
-# FONT='lat9w-08.psf.gz brl-8x8.psf'

stage2/01-sys-tweaks/files/resize2fs_once

@@ -1,25 +0,0 @@
-#!/bin/sh
-### BEGIN INIT INFO
-# Provides:          resize2fs_once
-# Required-Start:
-# Required-Stop:
-# Default-Start: 3
-# Default-Stop:
-# Short-Description: Resize the root filesystem to fill partition
-# Description:
-### END INIT INFO
-. /lib/lsb/init-functions
-case "$1" in
-  start)
-    log_daemon_msg "Starting resize2fs_once"
-    ROOT_DEV=$(findmnt / -o source -n) &&
-    resize2fs $ROOT_DEV &&
-    update-rc.d resize2fs_once remove &&
-    rm /etc/init.d/resize2fs_once &&
-    log_end_msg $?
-    ;;
-  *)
-    echo "Usage: $0 start" >&2
-    exit 3
-    ;;
-esac

stage2/04-cloud-init/00-packages

@@ -0,0 +1,2 @@
+cloud-init
+rpi-cloud-init-mods

stage2/04-cloud-init/01-run.sh

@@ -0,0 +1,12 @@
+#!/bin/bash -e
+
+if [ "${ENABLE_CLOUD_INIT}" != "1" ]; then
+	log "Skipping cloud-init stage"
+	exit 0
+fi
+
+# some preseeding without any runtime effect if not modified
+# install meta-data file for NoCloud data-source to work
+install -v -m 755 files/meta-data "${ROOTFS_DIR}/boot/firmware/meta-data"
+install -v -m 755 files/user-data "${ROOTFS_DIR}/boot/firmware/user-data"
+install -v -m 755 files/network-config "${ROOTFS_DIR}/boot/firmware/network-config" 

stage2/04-cloud-init/README.txt

@@ -0,0 +1,10 @@
+Cloud-Init support for Raspberry Pi OS
+
+Reference for Raspberry Pi custom cloud-init config module: https://cloudinit.readthedocs.io/en/latest/reference/modules.html#raspberry-pi-configuration
+
+- files/network-config is required because otherwise imager would fail to create the correct filesystem entry
+
+- files/user-data same reason and to include some example configurations
+
+- files/meta-data Cloud-init instance configuration
+

stage2/04-cloud-init/files/meta-data

@@ -0,0 +1,18 @@
+# This is the meta-data configuration file for cloud-init. Please refer to the
+# cloud-init documentation for more information:
+#
+# https://cloudinit.readthedocs.io/
+
+# Set the datasource mode to "local". This ensures that user-data is acted upon
+# prior to bringing up the network (because everything about the datasource is
+# assumed to be local). If you wish to use an HTTP datasource instead, you can
+# change this to "net" or override it on the kernel cmdline (see README).
+dsmode: local
+
+# Specifies the "unique" identifier of the instance. Typically in cloud-init
+# this is generated by the owning cloud and is actually unique (to some
+# degree). Here our data-source is local, so this is just a fixed string.
+# Warning: changing this will cause cloud-init to assume it is running on a
+# "new" instance, and to go through first time setup again (the value is
+# compared to a cached copy).
+instance_id: rpios-image

stage2/04-cloud-init/files/network-config

@@ -0,0 +1,50 @@
+# This file contains a netplan-compatible configuration which cloud-init will
+# apply on first-boot (note: it will *not* update the config after the first
+# boot). Please refer to the cloud-init documentation and the netplan reference
+# for full details:
+#
+# https://netplan.io/reference
+# https://cloudinit.readthedocs.io/en/latest/topics/network-config.html
+# https://cloudinit.readthedocs.io/en/latest/topics/network-config-format-v2.html
+#
+# Please note that the YAML format employed by this file is sensitive to
+# differences in whitespace; if you are editing this file in an editor (like
+# Notepad) which uses literal tabs, take care to only use spaces for
+# indentation. See the following link for more details:
+#
+# https://en.wikipedia.org/wiki/YAML
+#
+# Additionally, please be aware that if your boot sequence depends on active
+# networking (e.g. if your cloud-init configuration pulls packages or SSH
+# keys from the network), you *must* mark at least one interface as required
+# ("optional: false") below. Otherwise, particularly on faster boards,
+# cloud-init will start attempting to use the network before it is ready
+
+# Some additional examples are commented out below
+
+#network:
+#  version: 2
+#
+#  ethernets:
+#    eth0:
+#      dhcp4: true
+#      optional: true
+
+#  wifis:
+#    wlan0:
+#      dhcp4: true
+#      optional: true
+#      access-points:
+#        myhomewifi:
+#          password: "S3kr1t"
+#        myworkwifi:
+#          password: "correct battery horse staple"
+#        workssid:
+#          auth:
+#            key-management: eap
+#            method: peap
+#            identity: "me@example.com"
+#            password: "passw0rd"
+#            ca-certificate: /etc/my_ca.pem
+
+#      regulatory-domain: GB

stage2/04-cloud-init/files/user-data

@@ -0,0 +1,102 @@
+#cloud-config
+
+# This is the user-data configuration file for cloud-init. By default this sets
+# up an initial user called "ubuntu" with password "ubuntu", which must be
+# changed at first login. However, many additional actions can be initiated on
+# first boot from this file. The cloud-init documentation has more details:
+#
+# https://cloudinit.readthedocs.io/
+#
+# Please note that the YAML format employed by this file is sensitive to
+# differences in whitespace; if you are editing this file in an editor (like
+# Notepad) which uses literal tabs, take care to only use spaces for
+# indentation. See the following link for more details:
+#
+# https://en.wikipedia.org/wiki/YAML
+#
+# Some additional examples are provided in comments below the default
+# configuration.
+
+## Set the system's hostname. Please note that, unless you have a local DNS
+## setup where the hostname is derived from DHCP requests (as with dnsmasq),
+## setting the hostname here will not make the machine reachable by this name.
+## You may also wish to install avahi-daemon (see the "packages:" key below)
+## to make your machine reachable by the .local domain
+#hostname: raspberrypi
+
+## Set up the keyboard layout. See localectl(1), in particular the various
+## list-x11-* sub-commands, to determine the available models, layouts,
+## variants, and options
+#keyboard:
+#  model: pc105
+#  layout: gb
+#  variant:
+#  options: ctrl:nocaps
+
+# Controls password authentication with the SSH daemon; the default here can
+# prevent logging into SSH with a password. Changing this is a security risk
+# and you should at the very least ensure a different default password is
+# specified above
+#ssh_pwauth: false
+
+## On first boot, use ssh-import-id to give the specific users SSH access to
+## the default user
+#ssh_import_id:
+#- lp:my_launchpad_username
+#- gh:my_github_username
+
+## Add users and groups to the system, and import keys with the ssh-import-id
+## utility
+#groups:
+#- robot: [robot]
+#- robotics: [robot]
+#- pi
+#
+#users:
+#- default
+#- name: robot
+#  gecos: Mr. Robot
+#  primary_group: robot
+#  groups: users
+#  ssh_import_id: foobar
+#  lock_passwd: false
+#  passwd: $5$hkui88$nvZgIle31cNpryjRfO9uArF7DYiBcWEnjqq7L1AQNN3
+
+## Update apt database and upgrade packages on first boot
+#package_update: true
+#package_upgrade: true
+
+## Install additional packages on first boot
+#packages:
+#- avahi-daemon
+#- rng-tools
+#- python3-gpiozero
+#- [python3-serial, 3.5-1]
+
+## Write arbitrary files to the file-system (including binaries!)
+#write_files:
+#- path: /etc/default/console-setup
+#  content: |
+#    # Consult the console-setup(5) manual page.
+#    ACTIVE_CONSOLES="/dev/tty[1-6]"
+#    CHARMAP="UTF-8"
+#    VIDEOMODE=
+#    FONT="Lat15-Terminus18x10.psf.gz"
+#    FONTFACE=
+#    FONTSIZE=
+#    CODESET="Lat15"
+#  permissions: '0644'
+#  owner: root:root
+#- encoding: gzip
+#  path: /root/Makefile
+#  content: !!binary |
+#    H4sICF2DTWIAA01ha2VmaWxlAFNWCM8syVBILMjPyU/PTC1WKMlXiPB2dlFQNjSx5MpNteLi
+#    dLDiSoRQxYl5KeWZyRkgXrSCkoqKRmaKgm6pppKCbmqhgoFCrIKamkK1QmpyRr6Ckn92YqWS
+#    NdC80uQMBZhOa4VahZoaqIrwjMQSewXfxOxUhcwShcr80qLi1Jw0RSUuAIYfEJmVAAAA
+#  owner: root:root
+#  permissions: '0644'
+
+## Run arbitrary commands at rc.local like time
+#runcmd:
+#- [ ls, -l, / ]
+#- [ sh, -xc, "echo $(date) ': hello world!'" ]

stage3/00-install-packages/00-packages

@@ -1,22 +1,4 @@
-gstreamer1.0-x gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-bad gstreamer1.0-alsa gstreamer1.0-libav
+rpd-preferences
-evince gtk2-engines alsa-utils
+rpd-theme
-desktop-base
-git
-policykit-1
-gvfs
-rfkill
-chromium rpi-chromium-mods libwidevinecdm0
-firefox rpi-firefox-mods
-gldriver-test
-fonts-droid-fallback
-fonts-liberation2
 fonts-noto
 fonts-noto-color-emoji
-obconf
-raindrop
-libcamera-tools
-rpicam-apps
-python3-picamera2
-python3-pyqt5
-python3-opengl
-vulkan-tools mesa-vulkan-drivers

stage3/00-install-packages/00-packages-nr

@@ -1,10 +1,3 @@
-xserver-xorg xinit
+rpd-wayland-core
-x11-xserver-utils
+rpd-x-core
-mousepad
-eom
 vim
-lxde lxtask menu-xdg
-zenity xdg-utils
-gvfs-backends gvfs-fuse
-lightdm gnome-themes-extra-data gnome-icon-theme
-gnome-keyring

stage3/00-install-packages/01-run.sh

@@ -1,5 +0,0 @@
-#!/bin/bash -e
-
-on_chroot <<- EOF
-	apt-mark auto python3-pyqt5 python3-opengl
-EOF

stage4/00-install-packages/00-debconf

@@ -1,2 +0,0 @@
-# Enable realtime process priority?
-jackd2  jackd/tweak_rt_limits   boolean true

stage4/00-install-packages/00-packages

@@ -1,27 +1,6 @@
-python3-pygame
+rpd-applications
-python3-tk thonny
+rpd-developer
-python3-pgzero
+rpd-graphics
-python3-serial
+rpd-utilities
-debian-reference-en dillo
+rpd-wayland-extras
-raspberrypi-net-mods raspberrypi-ui-mods
+rpd-x-extras
-python3-pip
-python3-numpy
-rc-gui sense-hat
-tree
-libgl1-mesa-dri libgles1 libgles2-mesa xcompmgr
-geany
-piclone
-python3-twython
-python3-flask
-pprompt
-piwiz
-rp-prefapps
-ffmpeg
-vlc
-rpi-connect
-rpi-imager
-labwc
-squeekboard
-
-# ninja-build and openocd needed for vscode pico extension
-meson openocd

stage4/00-install-packages/00-packages-nr

@@ -1,2 +0,0 @@
-pi-package
-realvnc-vnc-server

stage4/00-install-packages/02-packages

@@ -1,4 +0,0 @@
-hunspell-en-gb
-hyphen-en-gb
-wamerican
-wbritish

stage4/01-console-autologin/00-run.sh

@@ -1,5 +0,0 @@
-#!/bin/bash -e
-
-on_chroot << EOF
-	SUDO_USER="${FIRST_USER_NAME}" raspi-config nonint do_boot_behaviour B4
-EOF

stage4/01-disable-wayvnc/00-run.sh

@@ -0,0 +1,5 @@
+#!/bin/bash -e
+
+on_chroot <<- EOF
+	SUDO_USER="${FIRST_USER_NAME}" raspi-config nonint do_vnc 1
+EOF

stage4/04-enable-xcompmgr/00-run.sh

@@ -1,5 +0,0 @@
-#!/bin/bash -e
-
-on_chroot << EOF
-	raspi-config nonint do_xcompmgr 0
-EOF

stage4/05-print-support/00-packages

@@ -1 +0,0 @@
-cups

stage4/06-enable-wayland/00-run.sh

@@ -1,5 +0,0 @@
-#!/bin/bash -e
-
-on_chroot << EOF
-	SUDO_USER="${FIRST_USER_NAME}" raspi-config nonint do_wayland W3
-EOF

stage5/00-install-extras/00-packages

@@ -1,7 +1,4 @@
-mu-editor
+scratch3
-scratch nuscratch scratch3
-wolfram-engine
 claws-mail
-realvnc-vnc-viewer
 code-the-classics code-the-classics-2
 kicad