b3fe8c9e20
This commit moves ContentClient from creating a CapturedBufferState for
buffer operations, to performing all of those operations on the
DrawTarget(Capture). Creating a DrawTargetCapture is now performed
by the RotatedBuffer when we BeginPaint, all operations are performed
on this capture, and then it's returned to the ClientPaintedLayer
as a PaintTask.
This commit is an involved refactoring of ContentClient and RotatedBuffer
to get this all to work. Here are the major parts:
1. RotatedBuffer is refactored to always perform operations on a single
DrawTarget, which may be a single DT, dual DT, or capture.
2. RotatedBuffer adds BeginCapture and EndCapture methods to switch
which DT is used in operations
3. ContentClient uses the RB capture methods when we are async painting
4. CC::BeginPaint is refactored to only perform capturing on a single
RotatedBuffer. This is because we can't have the output of one
PaintTask be the input of a different PaintTask due to the design
of the Snapshot API.
a. This can occur, today, by doing a FinalizeFrame only to later
fail to Unrotate the buffer, causing a new RB to be created
and painted into
b. The previous PaintThread code worked because it used the
buffer operations which didn't use Snapshot's
c. This is fixed by not doing FinalizeFrame on a buffer if we
realize we cannot unrotate it, and switching to initializing
a buffer using the front buffer which should be up to date.
d. I don't like touching this code, but it passes reftests,
might be a performance improvement, and I've tested it on
known regressions from the last time I messed up this code.
5. CC::PrepareForPaint is inlined into BeginPaint because dual draw
targets can be cleared correctly from a previous commit
6. The code paths in ClientPaintedLayer are unified because we no
longer need to special case this beyond setting the correct
ContentClient flag.
7. CapturedPaintState and CapturedBufferState are removed in favor
of PaintTask. Additionally EndLayer is no longer needed as all
quadrants of a rotated buffer are in the same capture, so we
don't need special case flushing code.
MozReview-Commit-ID: 9UI40dwran
915 lines
32 KiB
C++
915 lines
32 KiB
C++
/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
|
|
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
|
|
/* This Source Code Form is subject to the terms of the Mozilla Public
|
|
* License, v. 2.0. If a copy of the MPL was not distributed with this
|
|
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
|
|
|
|
#include "mozilla/layers/ContentClient.h"
|
|
#include "BasicLayers.h" // for BasicLayerManager
|
|
#include "gfxContext.h" // for gfxContext, etc
|
|
#include "gfxPlatform.h" // for gfxPlatform
|
|
#include "gfxEnv.h" // for gfxEnv
|
|
#include "gfxPrefs.h" // for gfxPrefs
|
|
#include "gfxPoint.h" // for IntSize, gfxPoint
|
|
#include "gfxUtils.h" // for gfxUtils
|
|
#include "ipc/ShadowLayers.h" // for ShadowLayerForwarder
|
|
#include "mozilla/ArrayUtils.h" // for ArrayLength
|
|
#include "mozilla/gfx/2D.h" // for DrawTarget, Factory
|
|
#include "mozilla/gfx/BasePoint.h" // for BasePoint
|
|
#include "mozilla/gfx/BaseSize.h" // for BaseSize
|
|
#include "mozilla/gfx/Rect.h" // for Rect
|
|
#include "mozilla/gfx/Types.h"
|
|
#include "mozilla/layers/CompositorBridgeChild.h" // for CompositorBridgeChild
|
|
#include "mozilla/layers/LayerManagerComposite.h"
|
|
#include "mozilla/layers/LayersMessages.h" // for ThebesBufferData
|
|
#include "mozilla/layers/LayersTypes.h"
|
|
#include "mozilla/layers/PaintThread.h"
|
|
#include "nsDebug.h" // for NS_ASSERTION, NS_WARNING, etc
|
|
#include "nsISupportsImpl.h" // for gfxContext::Release, etc
|
|
#include "nsIWidget.h" // for nsIWidget
|
|
#include "nsLayoutUtils.h"
|
|
#ifdef XP_WIN
|
|
#include "gfxWindowsPlatform.h"
|
|
#endif
|
|
#ifdef MOZ_WIDGET_GTK
|
|
#include "gfxPlatformGtk.h"
|
|
#endif
|
|
#include "ReadbackLayer.h"
|
|
|
|
#include <utility>
|
|
#include <vector>
|
|
|
|
using namespace std;
|
|
|
|
namespace mozilla {
|
|
|
|
using namespace gfx;
|
|
|
|
namespace layers {
|
|
|
|
static TextureFlags TextureFlagsForContentClientFlags(uint32_t aBufferFlags)
|
|
{
|
|
TextureFlags result = TextureFlags::NO_FLAGS;
|
|
|
|
if (aBufferFlags & ContentClient::BUFFER_COMPONENT_ALPHA) {
|
|
result |= TextureFlags::COMPONENT_ALPHA;
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
static IntRect
|
|
ComputeBufferRect(const IntRect& aRequestedRect)
|
|
{
|
|
IntRect rect(aRequestedRect);
|
|
// Set a minimum width to guarantee a minimum size of buffers we
|
|
// allocate (and work around problems on some platforms with smaller
|
|
// dimensions). 64 used to be the magic number needed to work around
|
|
// a rendering glitch on b2g (see bug 788411). Now that we don't support
|
|
// this device anymore we should be fine with 8 pixels as the minimum.
|
|
rect.SetWidth(std::max(aRequestedRect.Width(), 8));
|
|
return rect;
|
|
}
|
|
|
|
/* static */ already_AddRefed<ContentClient>
|
|
ContentClient::CreateContentClient(CompositableForwarder* aForwarder)
|
|
{
|
|
LayersBackend backend = aForwarder->GetCompositorBackendType();
|
|
if (backend != LayersBackend::LAYERS_OPENGL &&
|
|
backend != LayersBackend::LAYERS_D3D11 &&
|
|
backend != LayersBackend::LAYERS_WR &&
|
|
backend != LayersBackend::LAYERS_BASIC) {
|
|
return nullptr;
|
|
}
|
|
|
|
bool useDoubleBuffering = false;
|
|
|
|
#ifdef XP_WIN
|
|
if (backend == LayersBackend::LAYERS_D3D11) {
|
|
useDoubleBuffering = gfxWindowsPlatform::GetPlatform()->IsDirect2DBackend();
|
|
} else
|
|
#endif
|
|
#ifdef MOZ_WIDGET_GTK
|
|
// We can't use double buffering when using image content with
|
|
// Xrender support on Linux, as ContentHostDoubleBuffered is not
|
|
// suited for direct uploads to the server.
|
|
if (!gfxPlatformGtk::GetPlatform()->UseImageOffscreenSurfaces() ||
|
|
!gfxVars::UseXRender())
|
|
#endif
|
|
{
|
|
useDoubleBuffering = backend == LayersBackend::LAYERS_BASIC;
|
|
}
|
|
|
|
if (useDoubleBuffering || gfxEnv::ForceDoubleBuffering()) {
|
|
return MakeAndAddRef<ContentClientDoubleBuffered>(aForwarder);
|
|
}
|
|
return MakeAndAddRef<ContentClientSingleBuffered>(aForwarder);
|
|
}
|
|
|
|
void
|
|
ContentClient::Clear()
|
|
{
|
|
mBuffer = nullptr;
|
|
}
|
|
|
|
ContentClient::PaintState
|
|
ContentClient::BeginPaint(PaintedLayer* aLayer,
|
|
uint32_t aFlags)
|
|
{
|
|
BufferDecision dest = CalculateBufferForPaint(aLayer, aFlags);
|
|
|
|
bool asyncPaint = (aFlags & PAINT_ASYNC);
|
|
|
|
PaintState result;
|
|
result.mAsyncPaint = asyncPaint;
|
|
result.mContentType = dest.mBufferContentType;
|
|
|
|
if (!dest.mCanKeepBufferContents) {
|
|
// We're effectively clearing the valid region, so we need to draw
|
|
// the entire needed region now.
|
|
MOZ_ASSERT(!dest.mCanReuseBuffer);
|
|
MOZ_ASSERT(dest.mValidRegion.IsEmpty());
|
|
|
|
result.mRegionToInvalidate = aLayer->GetValidRegion();
|
|
|
|
#if defined(MOZ_DUMP_PAINTING)
|
|
if (nsLayoutUtils::InvalidationDebuggingIsEnabled()) {
|
|
if (result.mContentType != mBuffer->GetContentType()) {
|
|
printf_stderr("Invalidating entire rotated buffer (layer %p): content type changed\n", aLayer);
|
|
} else if ((dest.mBufferMode == SurfaceMode::SURFACE_COMPONENT_ALPHA) != mBuffer->HaveBufferOnWhite()) {
|
|
printf_stderr("Invalidating entire rotated buffer (layer %p): component alpha changed\n", aLayer);
|
|
}
|
|
}
|
|
#endif
|
|
Clear();
|
|
}
|
|
|
|
result.mRegionToDraw.Sub(dest.mNeededRegion,
|
|
dest.mValidRegion);
|
|
|
|
if (result.mRegionToDraw.IsEmpty())
|
|
return result;
|
|
|
|
// We need to disable rotation if we're going to be resampled when
|
|
// drawing, because we might sample across the rotation boundary.
|
|
// Also disable buffer rotation when using webrender.
|
|
bool canHaveRotation = gfxPlatform::BufferRotationEnabled() &&
|
|
!(aFlags & (PAINT_WILL_RESAMPLE | PAINT_NO_ROTATION)) &&
|
|
!(aLayer->Manager()->AsWebRenderLayerManager());
|
|
bool canDrawRotated = aFlags & PAINT_CAN_DRAW_ROTATED;
|
|
OpenMode readMode = asyncPaint ? OpenMode::OPEN_READ_ASYNC
|
|
: OpenMode::OPEN_READ;
|
|
OpenMode writeMode = asyncPaint ? OpenMode::OPEN_READ_WRITE_ASYNC
|
|
: OpenMode::OPEN_READ_WRITE;
|
|
|
|
IntRect drawBounds = result.mRegionToDraw.GetBounds();
|
|
|
|
if (asyncPaint) {
|
|
result.mAsyncTask = new PaintTask();
|
|
}
|
|
|
|
// Try to acquire the back buffer, copy over contents if we are using a new buffer,
|
|
// and rotate or unrotate the buffer as necessary
|
|
if (mBuffer && dest.mCanReuseBuffer) {
|
|
if (mBuffer->Lock(writeMode)) {
|
|
auto newParameters = mBuffer->AdjustedParameters(dest.mBufferRect);
|
|
|
|
bool needsUnrotate = (!canHaveRotation && newParameters.IsRotated()) ||
|
|
(!canDrawRotated && newParameters.RectWrapsBuffer(drawBounds));
|
|
bool canUnrotate = !asyncPaint || mBuffer->BufferRotation() == IntPoint(0,0);
|
|
|
|
// Only begin a frame and copy over the previous frame if we don't need
|
|
// to unrotate, or we can try to unrotate it. This is to ensure that we
|
|
// don't have a paint task that depends on another paint task.
|
|
if (!needsUnrotate || canUnrotate) {
|
|
// If we're async painting then begin to capture draw commands
|
|
if (asyncPaint) {
|
|
mBuffer->BeginCapture();
|
|
}
|
|
|
|
// Do not modify result.mRegionToDraw or result.mContentType after this call.
|
|
FinalizeFrame(result);
|
|
}
|
|
|
|
// Try to rotate the buffer or unrotate it if we cannot be rotated
|
|
if (needsUnrotate) {
|
|
if (canUnrotate && mBuffer->UnrotateBufferTo(newParameters)) {
|
|
newParameters.SetUnrotated();
|
|
mBuffer->SetParameters(newParameters);
|
|
} else {
|
|
MOZ_ASSERT(!asyncPaint);
|
|
MOZ_ASSERT(GetFrontBuffer());
|
|
mBuffer->Unlock();
|
|
dest.mBufferRect = ComputeBufferRect(dest.mNeededRegion.GetBounds());
|
|
dest.mCanReuseBuffer = false;
|
|
}
|
|
} else {
|
|
mBuffer->SetParameters(newParameters);
|
|
}
|
|
} else {
|
|
result.mRegionToDraw = dest.mNeededRegion;
|
|
dest.mCanReuseBuffer = false;
|
|
Clear();
|
|
}
|
|
}
|
|
|
|
MOZ_ASSERT(dest.mBufferRect.Contains(result.mRegionToDraw.GetBounds()));
|
|
|
|
NS_ASSERTION(!(aFlags & PAINT_WILL_RESAMPLE) || dest.mBufferRect == dest.mNeededRegion.GetBounds(),
|
|
"If we're resampling, we need to validate the entire buffer");
|
|
|
|
// We never had a buffer, the buffer wasn't big enough, the content changed
|
|
// types, or we failed to unrotate the buffer when requested. In any case,
|
|
// we need to allocate a new one and prepare it for drawing.
|
|
if (!dest.mCanReuseBuffer) {
|
|
uint32_t bufferFlags = 0;
|
|
if (dest.mBufferMode == SurfaceMode::SURFACE_COMPONENT_ALPHA) {
|
|
bufferFlags |= BUFFER_COMPONENT_ALPHA;
|
|
}
|
|
|
|
RefPtr<RotatedBuffer> newBuffer = CreateBuffer(result.mContentType,
|
|
dest.mBufferRect,
|
|
bufferFlags);
|
|
|
|
if (!newBuffer) {
|
|
if (Factory::ReasonableSurfaceSize(IntSize(dest.mBufferRect.Width(), dest.mBufferRect.Height()))) {
|
|
gfxCriticalNote << "Failed buffer for "
|
|
<< dest.mBufferRect.X() << ", "
|
|
<< dest.mBufferRect.Y() << ", "
|
|
<< dest.mBufferRect.Width() << ", "
|
|
<< dest.mBufferRect.Height();
|
|
}
|
|
Clear();
|
|
return result;
|
|
}
|
|
|
|
if (!newBuffer->Lock(writeMode)) {
|
|
gfxCriticalNote << "Failed to lock new back buffer.";
|
|
Clear();
|
|
return result;
|
|
}
|
|
|
|
if (asyncPaint) {
|
|
newBuffer->BeginCapture();
|
|
}
|
|
|
|
// If we have an existing front buffer, copy it into the new back buffer
|
|
RefPtr<RotatedBuffer> frontBuffer = GetFrontBuffer();
|
|
|
|
if (frontBuffer && frontBuffer->Lock(readMode)) {
|
|
nsIntRegion updateRegion = newBuffer->BufferRect();
|
|
updateRegion.Sub(updateRegion, result.mRegionToDraw);
|
|
|
|
if (!updateRegion.IsEmpty()) {
|
|
newBuffer->UpdateDestinationFrom(*frontBuffer, updateRegion.GetBounds());
|
|
}
|
|
|
|
frontBuffer->Unlock();
|
|
} else {
|
|
result.mRegionToDraw = dest.mNeededRegion;
|
|
}
|
|
|
|
Clear();
|
|
mBuffer = newBuffer;
|
|
}
|
|
|
|
NS_ASSERTION(canHaveRotation || mBuffer->BufferRotation() == IntPoint(0,0),
|
|
"Rotation disabled, but we have nonzero rotation?");
|
|
|
|
if (result.mAsyncPaint) {
|
|
result.mAsyncTask->mTarget = mBuffer->GetBufferTarget();
|
|
result.mAsyncTask->mClients.push_back(mBuffer->GetClient());
|
|
if (mBuffer->GetClientOnWhite()) {
|
|
result.mAsyncTask->mClients.push_back(mBuffer->GetClientOnWhite());
|
|
}
|
|
}
|
|
|
|
nsIntRegion invalidate;
|
|
invalidate.Sub(aLayer->GetValidRegion(), dest.mBufferRect);
|
|
result.mRegionToInvalidate.Or(result.mRegionToInvalidate, invalidate);
|
|
|
|
result.mClip = DrawRegionClip::DRAW;
|
|
result.mMode = dest.mBufferMode;
|
|
|
|
return result;
|
|
}
|
|
|
|
void
|
|
ContentClient::EndPaint(PaintState& aPaintState, nsTArray<ReadbackProcessor::Update>* aReadbackUpdates)
|
|
{
|
|
if (aPaintState.mAsyncTask) {
|
|
aPaintState.mAsyncTask->mCapture = mBuffer->EndCapture();
|
|
}
|
|
}
|
|
|
|
nsIntRegion
|
|
ExpandDrawRegion(ContentClient::PaintState& aPaintState,
|
|
RotatedBuffer::DrawIterator* aIter,
|
|
BackendType aBackendType)
|
|
{
|
|
nsIntRegion* drawPtr = &aPaintState.mRegionToDraw;
|
|
if (aIter) {
|
|
// The iterators draw region currently only contains the bounds of the region,
|
|
// this makes it the precise region.
|
|
aIter->mDrawRegion.And(aIter->mDrawRegion, aPaintState.mRegionToDraw);
|
|
drawPtr = &aIter->mDrawRegion;
|
|
}
|
|
if (aBackendType == BackendType::DIRECT2D ||
|
|
aBackendType == BackendType::DIRECT2D1_1) {
|
|
// Simplify the draw region to avoid hitting expensive drawing paths
|
|
// for complex regions.
|
|
drawPtr->SimplifyOutwardByArea(100 * 100);
|
|
}
|
|
return *drawPtr;
|
|
}
|
|
|
|
DrawTarget*
|
|
ContentClient::BorrowDrawTargetForPainting(ContentClient::PaintState& aPaintState,
|
|
RotatedBuffer::DrawIterator* aIter /* = nullptr */)
|
|
{
|
|
if (aPaintState.mMode == SurfaceMode::SURFACE_NONE || !mBuffer) {
|
|
return nullptr;
|
|
}
|
|
|
|
DrawTarget* result = mBuffer->BorrowDrawTargetForQuadrantUpdate(
|
|
aPaintState.mRegionToDraw.GetBounds(),
|
|
aIter);
|
|
if (!result || !result->IsValid()) {
|
|
if (result) {
|
|
mBuffer->ReturnDrawTarget(result);
|
|
}
|
|
return nullptr;
|
|
}
|
|
|
|
nsIntRegion regionToDraw =
|
|
ExpandDrawRegion(aPaintState, aIter, result->GetBackendType());
|
|
|
|
if (aPaintState.mMode == SurfaceMode::SURFACE_COMPONENT_ALPHA ||
|
|
aPaintState.mContentType == gfxContentType::COLOR_ALPHA) {
|
|
// HaveBuffer() => we have an existing buffer that we must clear
|
|
for (auto iter = regionToDraw.RectIter(); !iter.Done(); iter.Next()) {
|
|
const IntRect& rect = iter.Get();
|
|
result->ClearRect(Rect(rect.X(), rect.Y(), rect.Width(), rect.Height()));
|
|
}
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
void
|
|
ContentClient::ReturnDrawTarget(gfx::DrawTarget*& aReturned)
|
|
{
|
|
mBuffer->ReturnDrawTarget(aReturned);
|
|
}
|
|
|
|
ContentClient::BufferDecision
|
|
ContentClient::CalculateBufferForPaint(PaintedLayer* aLayer,
|
|
uint32_t aFlags)
|
|
{
|
|
gfxContentType layerContentType =
|
|
aLayer->CanUseOpaqueSurface() ? gfxContentType::COLOR :
|
|
gfxContentType::COLOR_ALPHA;
|
|
|
|
SurfaceMode mode;
|
|
gfxContentType contentType;
|
|
IntRect destBufferRect;
|
|
nsIntRegion neededRegion;
|
|
nsIntRegion validRegion = aLayer->GetValidRegion();
|
|
|
|
bool canReuseBuffer = !!mBuffer;
|
|
bool canKeepBufferContents = true;
|
|
|
|
while (true) {
|
|
mode = aLayer->GetSurfaceMode();
|
|
neededRegion = aLayer->GetVisibleRegion().ToUnknownRegion();
|
|
canReuseBuffer = canReuseBuffer && ValidBufferSize(mBufferSizePolicy,
|
|
mBuffer->BufferRect().Size(),
|
|
neededRegion.GetBounds().Size());
|
|
contentType = layerContentType;
|
|
|
|
if (canReuseBuffer) {
|
|
if (mBuffer->BufferRect().Contains(neededRegion.GetBounds())) {
|
|
// We don't need to adjust mBufferRect.
|
|
destBufferRect = mBuffer->BufferRect();
|
|
} else if (neededRegion.GetBounds().Size() <= mBuffer->BufferRect().Size()) {
|
|
// The buffer's big enough but doesn't contain everything that's
|
|
// going to be visible. We'll move it.
|
|
destBufferRect = IntRect(neededRegion.GetBounds().TopLeft(), mBuffer->BufferRect().Size());
|
|
} else {
|
|
destBufferRect = neededRegion.GetBounds();
|
|
}
|
|
} else {
|
|
destBufferRect = ComputeBufferRect(neededRegion.GetBounds());
|
|
}
|
|
|
|
if (mode == SurfaceMode::SURFACE_COMPONENT_ALPHA) {
|
|
#if defined(MOZ_GFX_OPTIMIZE_MOBILE)
|
|
mode = SurfaceMode::SURFACE_SINGLE_CHANNEL_ALPHA;
|
|
#else
|
|
if (!aLayer->GetParent() ||
|
|
!aLayer->GetParent()->SupportsComponentAlphaChildren() ||
|
|
!aLayer->AsShadowableLayer() ||
|
|
!aLayer->AsShadowableLayer()->HasShadow()) {
|
|
mode = SurfaceMode::SURFACE_SINGLE_CHANNEL_ALPHA;
|
|
} else {
|
|
contentType = gfxContentType::COLOR;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
if ((aFlags & PAINT_WILL_RESAMPLE) &&
|
|
(!neededRegion.GetBounds().IsEqualInterior(destBufferRect) ||
|
|
neededRegion.GetNumRects() > 1))
|
|
{
|
|
// The area we add to neededRegion might not be painted opaquely.
|
|
if (mode == SurfaceMode::SURFACE_OPAQUE) {
|
|
contentType = gfxContentType::COLOR_ALPHA;
|
|
mode = SurfaceMode::SURFACE_SINGLE_CHANNEL_ALPHA;
|
|
}
|
|
|
|
// We need to validate the entire buffer, to make sure that only valid
|
|
// pixels are sampled.
|
|
neededRegion = destBufferRect;
|
|
}
|
|
|
|
// If we have an existing buffer, but the content type has changed or we
|
|
// have transitioned into/out of component alpha, then we need to recreate it.
|
|
bool needsComponentAlpha = (mode == SurfaceMode::SURFACE_COMPONENT_ALPHA);
|
|
bool backBufferChangedSurface = mBuffer &&
|
|
(contentType != mBuffer->GetContentType() ||
|
|
needsComponentAlpha != mBuffer->HaveBufferOnWhite());
|
|
if (canKeepBufferContents && backBufferChangedSurface) {
|
|
// Restart the decision process; we won't re-enter since we guard on
|
|
// being able to keep the buffer contents.
|
|
canReuseBuffer = false;
|
|
canKeepBufferContents = false;
|
|
validRegion.SetEmpty();
|
|
continue;
|
|
}
|
|
break;
|
|
}
|
|
|
|
NS_ASSERTION(destBufferRect.Contains(neededRegion.GetBounds()),
|
|
"Destination rect doesn't contain what we need to paint");
|
|
|
|
BufferDecision dest;
|
|
dest.mNeededRegion = std::move(neededRegion);
|
|
dest.mValidRegion = std::move(validRegion);
|
|
dest.mBufferRect = destBufferRect;
|
|
dest.mBufferMode = mode;
|
|
dest.mBufferContentType = contentType;
|
|
dest.mCanReuseBuffer = canReuseBuffer;
|
|
dest.mCanKeepBufferContents = canKeepBufferContents;
|
|
return dest;
|
|
}
|
|
|
|
bool
|
|
ContentClient::ValidBufferSize(BufferSizePolicy aPolicy,
|
|
const gfx::IntSize& aBufferSize,
|
|
const gfx::IntSize& aVisibleBoundsSize)
|
|
{
|
|
return (aVisibleBoundsSize == aBufferSize ||
|
|
(SizedToVisibleBounds != aPolicy &&
|
|
aVisibleBoundsSize < aBufferSize));
|
|
}
|
|
|
|
void
|
|
ContentClient::PrintInfo(std::stringstream& aStream, const char* aPrefix)
|
|
{
|
|
aStream << aPrefix;
|
|
aStream << nsPrintfCString("ContentClient (0x%p)", this).get();
|
|
}
|
|
|
|
// We pass a null pointer for the ContentClient Forwarder argument, which means
|
|
// this client will not have a ContentHost on the other side.
|
|
ContentClientBasic::ContentClientBasic(gfx::BackendType aBackend)
|
|
: ContentClient(nullptr, ContainsVisibleBounds)
|
|
, mBackend(aBackend)
|
|
{}
|
|
|
|
void
|
|
ContentClientBasic::DrawTo(PaintedLayer* aLayer,
|
|
gfx::DrawTarget* aTarget,
|
|
float aOpacity,
|
|
gfx::CompositionOp aOp,
|
|
gfx::SourceSurface* aMask,
|
|
const gfx::Matrix* aMaskTransform)
|
|
{
|
|
if (!mBuffer) {
|
|
return;
|
|
}
|
|
|
|
mBuffer->DrawTo(aLayer, aTarget, aOpacity, aOp,
|
|
aMask, aMaskTransform);
|
|
}
|
|
|
|
RefPtr<RotatedBuffer>
|
|
ContentClientBasic::CreateBuffer(gfxContentType aType,
|
|
const IntRect& aRect,
|
|
uint32_t aFlags)
|
|
{
|
|
MOZ_ASSERT(!(aFlags & BUFFER_COMPONENT_ALPHA));
|
|
if (aFlags & BUFFER_COMPONENT_ALPHA) {
|
|
gfxDevCrash(LogReason::AlphaWithBasicClient) << "Asking basic content client for component alpha";
|
|
}
|
|
|
|
IntSize size(aRect.Width(), aRect.Height());
|
|
RefPtr<gfx::DrawTarget> drawTarget;
|
|
|
|
#ifdef XP_WIN
|
|
if (mBackend == BackendType::CAIRO &&
|
|
(aType == gfxContentType::COLOR || aType == gfxContentType::COLOR_ALPHA)) {
|
|
RefPtr<gfxASurface> surf =
|
|
new gfxWindowsSurface(size, aType == gfxContentType::COLOR ? gfxImageFormat::X8R8G8B8_UINT32 :
|
|
gfxImageFormat::A8R8G8B8_UINT32);
|
|
drawTarget = gfxPlatform::GetPlatform()->CreateDrawTargetForSurface(surf, size);
|
|
}
|
|
#endif
|
|
|
|
if (!drawTarget) {
|
|
drawTarget = gfxPlatform::GetPlatform()->CreateDrawTargetForBackend(
|
|
mBackend, size,
|
|
gfxPlatform::GetPlatform()->Optimal2DFormatForContent(aType));
|
|
}
|
|
|
|
if (!drawTarget) {
|
|
return nullptr;
|
|
}
|
|
|
|
return new DrawTargetRotatedBuffer(drawTarget, nullptr, aRect, IntPoint(0,0));
|
|
}
|
|
|
|
class RemoteBufferReadbackProcessor : public TextureReadbackSink
|
|
{
|
|
public:
|
|
RemoteBufferReadbackProcessor(nsTArray<ReadbackProcessor::Update>* aReadbackUpdates,
|
|
const IntRect& aBufferRect, const nsIntPoint& aBufferRotation)
|
|
: mReadbackUpdates(*aReadbackUpdates)
|
|
, mBufferRect(aBufferRect)
|
|
, mBufferRotation(aBufferRotation)
|
|
{
|
|
for (uint32_t i = 0; i < mReadbackUpdates.Length(); ++i) {
|
|
mLayerRefs.push_back(mReadbackUpdates[i].mLayer);
|
|
}
|
|
}
|
|
|
|
virtual void ProcessReadback(gfx::DataSourceSurface *aSourceSurface) override
|
|
{
|
|
SourceRotatedBuffer rotBuffer(aSourceSurface, nullptr, mBufferRect, mBufferRotation);
|
|
|
|
for (uint32_t i = 0; i < mReadbackUpdates.Length(); ++i) {
|
|
ReadbackProcessor::Update& update = mReadbackUpdates[i];
|
|
nsIntPoint offset = update.mLayer->GetBackgroundLayerOffset();
|
|
|
|
ReadbackSink* sink = update.mLayer->GetSink();
|
|
|
|
if (!sink) {
|
|
continue;
|
|
}
|
|
|
|
if (!aSourceSurface) {
|
|
sink->SetUnknown(update.mSequenceCounter);
|
|
continue;
|
|
}
|
|
|
|
RefPtr<DrawTarget> dt =
|
|
sink->BeginUpdate(update.mUpdateRect + offset, update.mSequenceCounter);
|
|
if (!dt) {
|
|
continue;
|
|
}
|
|
|
|
dt->SetTransform(Matrix::Translation(offset.x, offset.y));
|
|
|
|
rotBuffer.DrawBufferWithRotation(dt);
|
|
|
|
update.mLayer->GetSink()->EndUpdate(update.mUpdateRect + offset);
|
|
}
|
|
}
|
|
|
|
private:
|
|
nsTArray<ReadbackProcessor::Update> mReadbackUpdates;
|
|
// This array is used to keep the layers alive until the callback.
|
|
vector<RefPtr<Layer>> mLayerRefs;
|
|
|
|
IntRect mBufferRect;
|
|
nsIntPoint mBufferRotation;
|
|
};
|
|
|
|
void
|
|
ContentClientRemoteBuffer::EndPaint(PaintState& aPaintState, nsTArray<ReadbackProcessor::Update>* aReadbackUpdates)
|
|
{
|
|
MOZ_ASSERT(!mBuffer || !mBuffer->HaveBufferOnWhite() ||
|
|
!aReadbackUpdates || aReadbackUpdates->Length() == 0);
|
|
|
|
RemoteRotatedBuffer* remoteBuffer = GetRemoteBuffer();
|
|
|
|
if (remoteBuffer && remoteBuffer->IsLocked()) {
|
|
if (aReadbackUpdates && aReadbackUpdates->Length() > 0) {
|
|
RefPtr<TextureReadbackSink> readbackSink = new RemoteBufferReadbackProcessor(aReadbackUpdates,
|
|
remoteBuffer->BufferRect(),
|
|
remoteBuffer->BufferRotation());
|
|
|
|
remoteBuffer->GetClient()->SetReadbackSink(readbackSink);
|
|
}
|
|
|
|
remoteBuffer->Unlock();
|
|
remoteBuffer->SyncWithObject(mForwarder->GetSyncObject());
|
|
}
|
|
|
|
ContentClient::EndPaint(aPaintState, aReadbackUpdates);
|
|
}
|
|
|
|
RefPtr<RotatedBuffer>
|
|
ContentClientRemoteBuffer::CreateBuffer(gfxContentType aType,
|
|
const IntRect& aRect,
|
|
uint32_t aFlags)
|
|
{
|
|
// If we hit this assertion, then it might be due to an empty transaction
|
|
// followed by a real transaction. Our buffers should be created (but not
|
|
// painted in the empty transaction) and then painted (but not created) in the
|
|
// real transaction. That is kind of fragile, and this assert will catch
|
|
// circumstances where we screw that up, e.g., by unnecessarily recreating our
|
|
// buffers.
|
|
MOZ_ASSERT(!mIsNewBuffer,
|
|
"Bad! Did we create a buffer twice without painting?");
|
|
|
|
gfx::SurfaceFormat format = gfxPlatform::GetPlatform()->Optimal2DFormatForContent(aType);
|
|
|
|
TextureFlags textureFlags = TextureFlagsForContentClientFlags(aFlags);
|
|
if (aFlags & BUFFER_COMPONENT_ALPHA) {
|
|
textureFlags |= TextureFlags::COMPONENT_ALPHA;
|
|
}
|
|
|
|
RefPtr<RotatedBuffer> buffer = CreateBufferInternal(aRect, format, textureFlags);
|
|
|
|
if (!buffer) {
|
|
return nullptr;
|
|
}
|
|
|
|
mIsNewBuffer = true;
|
|
mTextureFlags = textureFlags;
|
|
|
|
return buffer;
|
|
}
|
|
|
|
RefPtr<RotatedBuffer>
|
|
ContentClientRemoteBuffer::CreateBufferInternal(const gfx::IntRect& aRect,
|
|
gfx::SurfaceFormat aFormat,
|
|
TextureFlags aFlags)
|
|
{
|
|
TextureAllocationFlags textureAllocFlags
|
|
= (aFlags & TextureFlags::COMPONENT_ALPHA) ?
|
|
TextureAllocationFlags::ALLOC_CLEAR_BUFFER_BLACK :
|
|
TextureAllocationFlags::ALLOC_CLEAR_BUFFER;
|
|
|
|
RefPtr<TextureClient> textureClient = CreateTextureClientForDrawing(
|
|
aFormat, aRect.Size(), BackendSelector::Content,
|
|
aFlags | ExtraTextureFlags() | TextureFlags::BLOCKING_READ_LOCK,
|
|
textureAllocFlags
|
|
);
|
|
|
|
if (!textureClient || !AddTextureClient(textureClient)) {
|
|
return nullptr;
|
|
}
|
|
|
|
RefPtr<TextureClient> textureClientOnWhite;
|
|
if (aFlags & TextureFlags::COMPONENT_ALPHA) {
|
|
TextureAllocationFlags allocFlags = ALLOC_CLEAR_BUFFER_WHITE;
|
|
if (mForwarder->SupportsTextureDirectMapping()) {
|
|
allocFlags = TextureAllocationFlags(allocFlags | ALLOC_ALLOW_DIRECT_MAPPING);
|
|
}
|
|
textureClientOnWhite = textureClient->CreateSimilar(
|
|
mForwarder->GetCompositorBackendType(),
|
|
aFlags | ExtraTextureFlags(),
|
|
allocFlags
|
|
);
|
|
if (!textureClientOnWhite || !AddTextureClient(textureClientOnWhite)) {
|
|
return nullptr;
|
|
}
|
|
// We don't enable the readlock for the white buffer since we always
|
|
// use them together and waiting on the lock for the black
|
|
// should be sufficient.
|
|
}
|
|
|
|
return new RemoteRotatedBuffer(textureClient,
|
|
textureClientOnWhite,
|
|
aRect,
|
|
IntPoint(0,0));
|
|
}
|
|
|
|
nsIntRegion
|
|
ContentClientRemoteBuffer::GetUpdatedRegion(const nsIntRegion& aRegionToDraw,
|
|
const nsIntRegion& aVisibleRegion)
|
|
{
|
|
nsIntRegion updatedRegion;
|
|
if (mIsNewBuffer || mBuffer->DidSelfCopy()) {
|
|
// A buffer reallocation clears both buffers. The front buffer has all the
|
|
// content by now, but the back buffer is still clear. Here, in effect, we
|
|
// are saying to copy all of the pixels of the front buffer to the back.
|
|
// Also when we self-copied in the buffer, the buffer space
|
|
// changes and some changed buffer content isn't reflected in the
|
|
// draw or invalidate region (on purpose!). When this happens, we
|
|
// need to read back the entire buffer too.
|
|
updatedRegion = aVisibleRegion.GetBounds();
|
|
mIsNewBuffer = false;
|
|
} else {
|
|
updatedRegion = aRegionToDraw;
|
|
}
|
|
|
|
MOZ_ASSERT(mBuffer, "should have a back buffer by now");
|
|
NS_ASSERTION(mBuffer->BufferRect().Contains(aRegionToDraw.GetBounds()),
|
|
"Update outside of buffer rect!");
|
|
|
|
return updatedRegion;
|
|
}
|
|
|
|
void
|
|
ContentClientRemoteBuffer::Updated(const nsIntRegion& aRegionToDraw,
|
|
const nsIntRegion& aVisibleRegion)
|
|
{
|
|
nsIntRegion updatedRegion = GetUpdatedRegion(aRegionToDraw,
|
|
aVisibleRegion);
|
|
|
|
RemoteRotatedBuffer* remoteBuffer = GetRemoteBuffer();
|
|
|
|
MOZ_ASSERT(remoteBuffer && remoteBuffer->GetClient());
|
|
if (remoteBuffer->HaveBufferOnWhite()) {
|
|
mForwarder->UseComponentAlphaTextures(this,
|
|
remoteBuffer->GetClient(),
|
|
remoteBuffer->GetClientOnWhite());
|
|
} else {
|
|
AutoTArray<CompositableForwarder::TimedTextureClient,1> textures;
|
|
CompositableForwarder::TimedTextureClient* t = textures.AppendElement();
|
|
t->mTextureClient = remoteBuffer->GetClient();
|
|
IntSize size = remoteBuffer->GetClient()->GetSize();
|
|
t->mPictureRect = nsIntRect(0, 0, size.width, size.height);
|
|
GetForwarder()->UseTextures(this, textures);
|
|
}
|
|
|
|
// This forces a synchronous transaction, so we can swap buffers now
|
|
// and know that we'll have sole ownership of the old front buffer
|
|
// by the time we paint next.
|
|
mForwarder->UpdateTextureRegion(this,
|
|
ThebesBufferData(remoteBuffer->BufferRect(),
|
|
remoteBuffer->BufferRotation()),
|
|
updatedRegion);
|
|
SwapBuffers(updatedRegion);
|
|
}
|
|
|
|
void
|
|
ContentClientRemoteBuffer::Dump(std::stringstream& aStream,
|
|
const char* aPrefix,
|
|
bool aDumpHtml, TextureDumpMode aCompress)
|
|
{
|
|
RemoteRotatedBuffer* remoteBuffer = GetRemoteBuffer();
|
|
|
|
// TODO We should combine the OnWhite/OnBlack here an just output a single image.
|
|
if (!aDumpHtml) {
|
|
aStream << "\n" << aPrefix << "Surface: ";
|
|
}
|
|
CompositableClient::DumpTextureClient(aStream,
|
|
remoteBuffer ? remoteBuffer->GetClient() : nullptr,
|
|
aCompress);
|
|
}
|
|
|
|
void
|
|
ContentClientDoubleBuffered::Dump(std::stringstream& aStream,
|
|
const char* aPrefix,
|
|
bool aDumpHtml, TextureDumpMode aCompress)
|
|
{
|
|
// TODO We should combine the OnWhite/OnBlack here an just output a single image.
|
|
if (!aDumpHtml) {
|
|
aStream << "\n" << aPrefix << "Surface: ";
|
|
}
|
|
CompositableClient::DumpTextureClient(aStream,
|
|
mFrontBuffer ? mFrontBuffer->GetClient() : nullptr,
|
|
aCompress);
|
|
}
|
|
|
|
void
|
|
ContentClientDoubleBuffered::Clear()
|
|
{
|
|
ContentClient::Clear();
|
|
mFrontBuffer = nullptr;
|
|
}
|
|
|
|
void
|
|
ContentClientDoubleBuffered::SwapBuffers(const nsIntRegion& aFrontUpdatedRegion)
|
|
{
|
|
mFrontUpdatedRegion = aFrontUpdatedRegion;
|
|
|
|
RefPtr<RemoteRotatedBuffer> frontBuffer = mFrontBuffer;
|
|
RefPtr<RemoteRotatedBuffer> backBuffer = GetRemoteBuffer();
|
|
|
|
std::swap(frontBuffer, backBuffer);
|
|
|
|
mFrontBuffer = frontBuffer;
|
|
mBuffer = backBuffer;
|
|
|
|
mFrontAndBackBufferDiffer = true;
|
|
}
|
|
|
|
ContentClient::PaintState
|
|
ContentClientDoubleBuffered::BeginPaint(PaintedLayer* aLayer,
|
|
uint32_t aFlags)
|
|
{
|
|
EnsureBackBufferIfFrontBuffer();
|
|
|
|
mIsNewBuffer = false;
|
|
|
|
if (!mFrontBuffer || !mBuffer) {
|
|
mFrontAndBackBufferDiffer = false;
|
|
}
|
|
|
|
if (mFrontAndBackBufferDiffer) {
|
|
if (mFrontBuffer->DidSelfCopy()) {
|
|
// We can't easily draw our front buffer into us, since we're going to be
|
|
// copying stuff around anyway it's easiest if we just move our situation
|
|
// to non-rotated while we're at it. If this situation occurs we'll have
|
|
// hit a self-copy path in PaintThebes before as well anyway.
|
|
gfx::IntRect backBufferRect = mBuffer->BufferRect();
|
|
backBufferRect.MoveTo(mFrontBuffer->BufferRect().TopLeft());
|
|
|
|
mBuffer->SetBufferRect(backBufferRect);
|
|
mBuffer->SetBufferRotation(IntPoint(0,0));
|
|
} else {
|
|
mBuffer->SetBufferRect(mFrontBuffer->BufferRect());
|
|
mBuffer->SetBufferRotation(mFrontBuffer->BufferRotation());
|
|
}
|
|
}
|
|
|
|
return ContentClient::BeginPaint(aLayer, aFlags);
|
|
}
|
|
|
|
// Sync front/back buffers content
|
|
// After executing, the new back buffer has the same (interesting) pixels as
|
|
// the new front buffer, and mValidRegion et al. are correct wrt the new
|
|
// back buffer (i.e. as they were for the old back buffer)
|
|
void
|
|
ContentClientDoubleBuffered::FinalizeFrame(PaintState& aPaintState)
|
|
{
|
|
if (!mFrontAndBackBufferDiffer) {
|
|
MOZ_ASSERT(!mFrontBuffer || !mFrontBuffer->DidSelfCopy(),
|
|
"If the front buffer did a self copy then our front and back buffer must be different.");
|
|
return;
|
|
}
|
|
|
|
MOZ_ASSERT(mFrontBuffer && mBuffer);
|
|
if (!mFrontBuffer || !mBuffer) {
|
|
return;
|
|
}
|
|
|
|
MOZ_LAYERS_LOG(("BasicShadowableThebes(%p): reading back <x=%d,y=%d,w=%d,h=%d>",
|
|
this,
|
|
mFrontUpdatedRegion.GetBounds().X(),
|
|
mFrontUpdatedRegion.GetBounds().Y(),
|
|
mFrontUpdatedRegion.GetBounds().Width(),
|
|
mFrontUpdatedRegion.GetBounds().Height()));
|
|
|
|
mFrontAndBackBufferDiffer = false;
|
|
|
|
nsIntRegion updateRegion = mFrontUpdatedRegion;
|
|
if (mFrontBuffer->DidSelfCopy()) {
|
|
mFrontBuffer->ClearDidSelfCopy();
|
|
updateRegion = mBuffer->BufferRect();
|
|
}
|
|
|
|
// No point in sync'ing what we are going to draw over anyway. And if there is
|
|
// nothing to sync at all, there is nothing to do and we can go home early.
|
|
updateRegion.Sub(updateRegion, aPaintState.mRegionToDraw);
|
|
if (updateRegion.IsEmpty()) {
|
|
return;
|
|
}
|
|
|
|
OpenMode openMode = aPaintState.mAsyncPaint
|
|
? OpenMode::OPEN_READ_ASYNC
|
|
: OpenMode::OPEN_READ_ONLY;
|
|
|
|
if (mFrontBuffer->Lock(openMode)) {
|
|
mBuffer->UpdateDestinationFrom(*mFrontBuffer, updateRegion.GetBounds());
|
|
|
|
if (aPaintState.mAsyncPaint) {
|
|
aPaintState.mAsyncTask->mClients.push_back(mFrontBuffer->GetClient());
|
|
if (mFrontBuffer->GetClientOnWhite()) {
|
|
aPaintState.mAsyncTask->mClients.push_back(mFrontBuffer->GetClientOnWhite());
|
|
}
|
|
}
|
|
|
|
mFrontBuffer->Unlock();
|
|
}
|
|
}
|
|
|
|
void
|
|
ContentClientDoubleBuffered::EnsureBackBufferIfFrontBuffer()
|
|
{
|
|
if (!mBuffer && mFrontBuffer) {
|
|
mBuffer = CreateBufferInternal(mFrontBuffer->BufferRect(),
|
|
mFrontBuffer->GetFormat(),
|
|
mTextureFlags);
|
|
MOZ_ASSERT(mBuffer);
|
|
}
|
|
}
|
|
|
|
} // namespace layers
|
|
} // namespace mozilla
|