corysanin/tubestation
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
18ca5d10c57f01d61b7bb7c73f0da641c56c94ad
tubestation/layout/generic/nsSimplePageSequence.cpp
rods@netscape.com 18ca5d10c5 Enabling the specifying of the gap around the page for Print Preview 
and an offset from the edge of the page for headers and footers (used in PP and Printing)
Bug 102596 r=dcone sr=attinasi
2001-11-28 15:19:47 +00:00

1058 lines
35 KiB
C++
Raw Blame History

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: NPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Netscape Public License
* Version 1.1 (the "License"); you may not use this file except in
* compliance with the License. You may obtain a copy of the License at
* http://www.mozilla.org/NPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the NPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the NPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "nsCOMPtr.h"
#include "nsReadableUtils.h"
#include "nsSimplePageSequence.h"
#include "nsIPresContext.h"
#include "nsIReflowCommand.h"
#include "nsIRenderingContext.h"
#include "nsIStyleContext.h"
#include "nsHTMLAtoms.h"
#include "nsHTMLIIDs.h"
#include "nsIDeviceContext.h"
#include "nsIViewManager.h"
#include "nsIPresShell.h"
#include "nsIStyleSet.h"
#include "nsIFontMetrics.h"
#include "nsIPrintOptions.h"
#include "nsPageFrame.h"
#include "nsIPrintPreviewContext.h"
#include "nsIPref.h" // for header/footer gap & ExtraMargin for Print Preview
// DateTime Includes
#include "nsDateTimeFormatCID.h"
#include "nsIDateTimeFormat.h"
#include "nsIServiceManager.h"
#include "nsILocale.h"
#include "nsLocaleCID.h"
#include "nsILocaleService.h"
static NS_DEFINE_CID(kDateTimeFormatCID, NS_DATETIMEFORMAT_CID);
static NS_DEFINE_CID(kLocaleServiceCID, NS_LOCALESERVICE_CID);
#define OFFSET_NOT_SET -1
// This is for localization of the "x of n" pages string
// this class contains a helper method we need to get
// a string from a string bundle
#include "nsFormControlHelper.h"
#define PRINTING_PROPERTIES "chrome://communicator/locale/printing.properties"
// Print Options
#include "nsIPrintOptions.h"
#include "nsGfxCIID.h"
#include "nsIServiceManager.h"
static NS_DEFINE_CID(kPrintOptionsCID, NS_PRINTOPTIONS_CID);
//
#if defined(DEBUG_rods) || defined(DEBUG_dcone)
#define DEBUG_PRINTING
#endif
#ifdef DEBUG_PRINTING
#define PRINT_DEBUG_MSG1(_msg1) fprintf(mDebugFD, (_msg1))
#define PRINT_DEBUG_MSG2(_msg1, _msg2) fprintf(mDebugFD, (_msg1), (_msg2))
#define PRINT_DEBUG_MSG3(_msg1, _msg2, _msg3) fprintf(mDebugFD, (_msg1), (_msg2), (_msg3))
#define PRINT_DEBUG_MSG4(_msg1, _msg2, _msg3, _msg4) fprintf(mDebugFD, (_msg1), (_msg2), (_msg3), (_msg4))
#define PRINT_DEBUG_MSG5(_msg1, _msg2, _msg3, _msg4, _msg5) fprintf(mDebugFD, (_msg1), (_msg2), (_msg3), (_msg4), (_msg5))
#else //--------------
#define PRINT_DEBUG_MSG1(_msg)
#define PRINT_DEBUG_MSG2(_msg1, _msg2)
#define PRINT_DEBUG_MSG3(_msg1, _msg2, _msg3)
#define PRINT_DEBUG_MSG4(_msg1, _msg2, _msg3, _msg4)
#define PRINT_DEBUG_MSG5(_msg1, _msg2, _msg3, _msg4, _msg5)
#endif
// This object a shared by all the nsPageFrames
// parented to a SimplePageSequenceFrame
nsSharedPageData::nsSharedPageData() :
mDateTimeStr(nsnull),
mHeadFootFont(nsnull),
mPageNumFormat(nsnull),
mPageNumAndTotalsFormat(nsnull),
mReflowRect(0,0,0,0),
mReflowMargin(0,0,0,0),
mShadowSize(0,0),
mDeadSpaceMargin(0,0,0,0),
mExtraMargin(0,0,0,0)
{
}
nsSharedPageData::~nsSharedPageData()
{
nsMemory::Free(mDateTimeStr);
if (mHeadFootFont) delete mHeadFootFont;
nsMemory::Free(mPageNumFormat);
nsMemory::Free(mPageNumAndTotalsFormat);
}
nsresult
NS_NewSimplePageSequenceFrame(nsIPresShell* aPresShell, nsIFrame** aNewFrame)
{
NS_PRECONDITION(aNewFrame, "null OUT ptr");
if (nsnull == aNewFrame) {
return NS_ERROR_NULL_POINTER;
}
nsSimplePageSequenceFrame* it = new (aPresShell) nsSimplePageSequenceFrame;
if (nsnull == it) {
return NS_ERROR_OUT_OF_MEMORY;
}
*aNewFrame = it;
return NS_OK;
}
nsSimplePageSequenceFrame::nsSimplePageSequenceFrame() :
mIsPrintingSelection(PR_FALSE),
mSelectionHeight(-1),
mYSelOffset(0)
{
mStartOffset = OFFSET_NOT_SET;
mEndOffset = OFFSET_NOT_SET;
nscoord halfInch = NS_INCHES_TO_TWIPS(0.5);
mMargin.SizeTo(halfInch, halfInch, halfInch, halfInch);
mPageData = new nsSharedPageData();
NS_ASSERTION(mPageData != nsnull, "Can't be null!");
if (mPageData->mHeadFootFont == nsnull) {
mPageData->mHeadFootFont = new nsFont("serif", NS_FONT_STYLE_NORMAL,NS_FONT_VARIANT_NORMAL,
NS_FONT_WEIGHT_NORMAL,0,NSIntPointsToTwips(10));
}
// XXX this code and the object data member "mIsPrintingSelection" is only needed
// for the hack for printing selection where we make the page the max size
nsresult rv;
mPageData->mPrintOptions = do_GetService(kPrintOptionsCID, &rv);
if (NS_SUCCEEDED(rv) && mPageData->mPrintOptions) {
PRInt16 printType;
mPageData->mPrintOptions->GetPrintRange(&printType);
mIsPrintingSelection = nsIPrintOptions::kRangeSelection == printType;
mPageData->mPrintOptions->GetMarginInTwips(mMargin);
// now get the default font form the print options
mPageData->mPrintOptions->GetDefaultFont(*mPageData->mHeadFootFont);
}
mSkipPageBegin = PR_FALSE;
mSkipPageEnd = PR_FALSE;
mPrintThisPage = PR_FALSE;
mOffsetX = 0;
mOffsetY = 0;
// Doing this here so we only have to go get these formats once
SetPageNumberFormat("pagenumber", "%1$d", PR_TRUE);
SetPageNumberFormat("pageofpages", "%1$d of %2$d", PR_FALSE);
#ifdef NS_DEBUG
mDebugFD = stdout;
#endif
}
nsSimplePageSequenceFrame::~nsSimplePageSequenceFrame()
{
if (mPageData) delete mPageData;
}
nsresult
nsSimplePageSequenceFrame::QueryInterface(const nsIID& aIID, void** aInstancePtr)
{
NS_PRECONDITION(0 != aInstancePtr, "null ptr");
if (NULL == aInstancePtr) {
return NS_ERROR_NULL_POINTER;
}
if (aIID.Equals(kIPageSequenceFrameIID)) {
*aInstancePtr = (void*)(nsIPageSequenceFrame*)this;
return NS_OK;
}
return nsContainerFrame::QueryInterface(aIID, aInstancePtr);
}
//----------------------------------------------------------------------
// Creates a continuing page frame
nsresult
nsSimplePageSequenceFrame::CreateContinuingPageFrame(nsIPresContext* aPresContext,
nsIFrame* aPageFrame,
nsIFrame** aContinuingPage)
{
nsIPresShell* presShell;
nsIStyleSet* styleSet;
nsresult rv;
// Create the continuing frame
aPresContext->GetShell(&presShell);
presShell->GetStyleSet(&styleSet);
NS_RELEASE(presShell);
rv = styleSet->CreateContinuingFrame(aPresContext, aPageFrame, this, aContinuingPage);
NS_RELEASE(styleSet);
return rv;
}
NS_IMETHODIMP
nsSimplePageSequenceFrame::Reflow(nsIPresContext* aPresContext,
nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus)
{
DO_GLOBAL_REFLOW_COUNT("nsSimplePageSequenceFrame", aReflowState.reason);
DISPLAY_REFLOW(aPresContext, this, aReflowState, aDesiredSize, aStatus);
NS_FRAME_TRACE_REFLOW_IN("nsSimplePageSequenceFrame::Reflow");
aStatus = NS_FRAME_COMPLETE; // we're always complete
nsCOMPtr<nsIPrintPreviewContext> ppContext = do_QueryInterface(aPresContext);
// *** Special Override ***
// If this is a sub-sdoc (meaning it doesn't take the whole page)
// and if this Document is in the upper left hand corner
// we need to suppress the top margin or it will reflow too small
// Start by getting the actual printer page dimensions to see if we are not a whole page
nsCOMPtr<nsIDeviceContext> dc;
aPresContext->GetDeviceContext(getter_AddRefs(dc));
NS_ASSERTION(dc, "nsIDeviceContext can't be NULL!");
nscoord width, height;
dc->GetDeviceSurfaceDimensions(width, height);
// Compute the size of each page and the x coordinate that each page will
// be placed at
nsRect pageSize;
nsRect adjSize;
aPresContext->GetPageDim(&pageSize, &adjSize);
nscoord extraGap = 0;
nsCOMPtr<nsIPref> pref = do_GetService(NS_PREF_CONTRACTID);
if (pref) {
nscoord inchInTwips = NS_INCHES_TO_TWIPS(1.0);
PRInt32 gapInTwips;
if (NS_SUCCEEDED(pref->GetIntPref("print.print_headerfooter_gap", &gapInTwips))) {
gapInTwips = PR_MAX(gapInTwips, 0);
gapInTwips = PR_MIN(gapInTwips, inchInTwips); // an inch is still probably excessive
mPageData->mHeadFooterGap = nscoord(gapInTwips);
}
if (NS_SUCCEEDED(pref->GetIntPref("print.print_extra_margin", &gapInTwips))) {
gapInTwips = PR_MAX(gapInTwips, 0);
gapInTwips = PR_MIN(gapInTwips, inchInTwips); // an inch is still probably excessive
extraGap = nscoord(gapInTwips);
}
}
nscoord quarterInch = NS_INCHES_TO_TWIPS(0.25);
nsMargin deadSpaceMargin(0,0,0,0);
nsMargin extraMargin(0,0,0,0);
nsSize shadowSize(0,0);
if (ppContext) {
if (adjSize.width == width && adjSize.height == height) {
deadSpaceMargin.SizeTo(quarterInch, quarterInch, quarterInch, quarterInch);
extraMargin.SizeTo(extraGap, extraGap, extraGap, extraGap);
float p2t;
aPresContext->GetScaledPixelsToTwips(&p2t);
nscoord fourPixels = NSIntPixelsToTwips(4, p2t);
shadowSize.SizeTo(fourPixels, fourPixels);
}
}
mPageData->mShadowSize = shadowSize;
mPageData->mExtraMargin = extraMargin;
mPageData->mDeadSpaceMargin = deadSpaceMargin;
// absolutely ignore all other types of reflows
// we only want to have done the Initial Reflow
if (eReflowReason_Resize == aReflowState.reason ||
eReflowReason_Incremental == aReflowState.reason ||
eReflowReason_StyleChange == aReflowState.reason ||
eReflowReason_Dirty == aReflowState.reason) {
// Return our desired size
aDesiredSize.height = mSize.height;
aDesiredSize.width = mSize.width;
aDesiredSize.ascent = aDesiredSize.height;
aDesiredSize.descent = 0;
return NS_OK;
}
PRBool suppressLeftMargin = PR_FALSE;
PRBool suppressRightMargin = PR_FALSE;
PRBool suppressTopMargin = PR_FALSE;
PRBool suppressBottomMargin = PR_FALSE;
if (pageSize != adjSize &&
(adjSize.x != 0 || adjSize.y != 0 || adjSize.width != 0 || adjSize.height != 0)) {
suppressLeftMargin = pageSize.x != adjSize.x;
suppressTopMargin = pageSize.y != adjSize.y;
if (pageSize.width != adjSize.width) {
suppressRightMargin = PR_TRUE;
pageSize.width = adjSize.width;
}
if (pageSize.height != adjSize.height) {
suppressBottomMargin = PR_TRUE;
pageSize.height = adjSize.height;
}
}
// XXX - Hack Alert
// OK, so ther eis a selection, we will print the entire selection
// on one page and then crop the page.
// This means you can never print any selection that is longer than one page
// put it keeps it from page breaking in the middle of your print of the selection
// (see also nsDocumentViewer.cpp)
if (mIsPrintingSelection) {
pageSize.height = NS_UNCONSTRAINEDSIZE;
suppressLeftMargin = PR_FALSE;
suppressTopMargin = PR_FALSE;
suppressRightMargin = PR_FALSE;
suppressBottomMargin = PR_FALSE;
}
// only use this local margin for sizing,
// not for positioning
nsMargin margin(suppressLeftMargin?0:mMargin.left,
suppressTopMargin?0:mMargin.top,
suppressRightMargin?0:mMargin.right,
suppressBottomMargin?0:mMargin.bottom);
nscoord x = deadSpaceMargin.left;
nscoord y = deadSpaceMargin.top;// Running y-offset for each page
// See if it's an incremental reflow command
if (eReflowReason_Incremental == aReflowState.reason) {
// XXX Skip Incremental reflow,
// in fact, all we want is the initial reflow
y = mRect.height;
} else {
nsReflowReason reflowReason = aReflowState.reason;
SetPageSizes(pageSize, margin);
// Tile the pages vertically
nsHTMLReflowMetrics kidSize(nsnull);
for (nsIFrame* kidFrame = mFrames.FirstChild(); nsnull != kidFrame; ) {
// Reflow the page
nsSize availSize(pageSize.width+deadSpaceMargin.right+deadSpaceMargin.left+shadowSize.width+extraMargin.right+extraMargin.left,
pageSize.height+deadSpaceMargin.top+deadSpaceMargin.bottom+shadowSize.height+extraMargin.top+extraMargin.bottom);
nsHTMLReflowState kidReflowState(aPresContext, aReflowState, kidFrame,
availSize, reflowReason);
nsReflowStatus status;
kidReflowState.availableWidth = availSize.width;
kidReflowState.availableHeight = availSize.height;
kidReflowState.mComputedWidth = kidReflowState.availableWidth;
//kidReflowState.mComputedHeight = kidReflowState.availableHeight;
PRINT_DEBUG_MSG3("AV W: %d H: %d\n", kidReflowState.availableWidth, kidReflowState.availableHeight);
// Set the shared data into the page frame before reflow
nsPageFrame * pf = NS_STATIC_CAST(nsPageFrame*, kidFrame);
pf->SetSharedPageData(mPageData);
// Place and size the page. If the page is narrower than our
// max width then center it horizontally
ReflowChild(kidFrame, aPresContext, kidSize, kidReflowState, x, y, 0, status);
FinishReflowChild(kidFrame, aPresContext, kidSize, x, y, 0);
y += kidSize.height;
// Leave a slight gap between the pages
y += quarterInch;
// Is the page complete?
nsIFrame* kidNextInFlow;
kidFrame->GetNextInFlow(&kidNextInFlow);
if (NS_FRAME_IS_COMPLETE(status)) {
NS_ASSERTION(nsnull == kidNextInFlow, "bad child flow list");
} else if (nsnull == kidNextInFlow) {
// The page isn't complete and it doesn't have a next-in-flow, so
// create a continuing page
nsIFrame* continuingPage;
CreateContinuingPageFrame(aPresContext, kidFrame, &continuingPage);
// Add it to our child list
kidFrame->SetNextSibling(continuingPage);
reflowReason = eReflowReason_Initial;
}
// Get the next page
kidFrame->GetNextSibling(&kidFrame);
}
// Get Total Page Count
nsIFrame* page;
PRInt32 pageTot = 0;
for (page = mFrames.FirstChild(); nsnull != page; page->GetNextSibling(&page)) {
pageTot++;
}
// Set Page Number Info
PRInt32 pageNum = 1;
for (page = mFrames.FirstChild(); nsnull != page; page->GetNextSibling(&page)) {
nsPageFrame * pf = NS_STATIC_CAST(nsPageFrame*, page);
if (pf != nsnull) {
pf->SetPageNumInfo(pageNum, pageTot);
}
pageNum++;
}
// Create current Date/Time String
nsresult rv;
nsCOMPtr<nsILocale> locale;
nsCOMPtr<nsILocaleService> localeSvc = do_GetService(kLocaleServiceCID, &rv);
if (NS_SUCCEEDED(rv)) {
rv = localeSvc->GetApplicationLocale(getter_AddRefs(locale));
if (NS_SUCCEEDED(rv) && locale) {
nsCOMPtr<nsIDateTimeFormat> dateTime;
rv = nsComponentManager::CreateInstance(kDateTimeFormatCID,
NULL,
NS_GET_IID(nsIDateTimeFormat),
(void**) getter_AddRefs(dateTime));
if (NS_SUCCEEDED(rv)) {
nsAutoString dateString;
time_t ltime;
time( &ltime );
if (NS_SUCCEEDED(dateTime->FormatTime(locale, kDateFormatShort, kTimeFormatNoSeconds, ltime, dateString))) {
PRUnichar * uStr = ToNewUnicode(dateString);
SetDateTimeStr(uStr); // memory will be freed
}
}
}
}
}
// Return our desired size
aDesiredSize.height = y;
aDesiredSize.width = pageSize.width+deadSpaceMargin.left+shadowSize.width;
aDesiredSize.ascent = aDesiredSize.height;
aDesiredSize.descent = 0;
// cache the size so we can set the desired size
// for the other reflows that happen
mSize.width = aDesiredSize.width;
mSize.height = aDesiredSize.height;
NS_FRAME_TRACE_REFLOW_OUT("nsSimplePageSequeceFrame::Reflow", aStatus);
return NS_OK;
}
//----------------------------------------------------------------------
#ifdef DEBUG
NS_IMETHODIMP
nsSimplePageSequenceFrame::GetFrameName(nsAString& aResult) const
{
return MakeFrameName(NS_LITERAL_STRING("SimplePageSequence"), aResult);
}
#endif
//----------------------------------------------------------------------
// Helper function that sends the progress notification. Returns PR_TRUE
// if printing should continue and PR_FALSE otherwise
static PRBool
SendStatusNotification(nsIPrintStatusCallback* aStatusCallback,
PRInt32 aPageNumber,
PRInt32 aTotalPages,
nsPrintStatus aStatus)
{
PRBool ret = PR_TRUE;
if (nsnull != aStatusCallback) {
aStatusCallback->OnProgress(aPageNumber, aTotalPages, aStatus,ret);
}
return ret;
}
NS_IMETHODIMP
nsSimplePageSequenceFrame::Print(nsIPresContext* aPresContext,
nsIPrintOptions* aPrintOptions,
nsIPrintStatusCallback* aStatusCallback)
{
NS_ASSERTION(0, "No longer being used.");
return NS_ERROR_FAILURE;
}
NS_IMETHODIMP
nsSimplePageSequenceFrame::SetOffsets(nscoord aStartOffset, nscoord aEndOffset)
{
mStartOffset = aStartOffset;
mEndOffset = aEndOffset;
return NS_OK;
}
//====================================================================
//== Asynch Printing
//====================================================================
NS_IMETHODIMP
nsSimplePageSequenceFrame::GetCurrentPageNum(PRInt32* aPageNum)
{
NS_ENSURE_ARG_POINTER(aPageNum);
*aPageNum = mPageNum;
return NS_OK;
}
NS_IMETHODIMP
nsSimplePageSequenceFrame::GetNumPages(PRInt32* aNumPages)
{
NS_ENSURE_ARG_POINTER(aNumPages);
*aNumPages = mTotalPages;
return NS_OK;
}
NS_IMETHODIMP
nsSimplePageSequenceFrame::IsDoingPrintRange(PRBool* aDoing)
{
NS_ENSURE_ARG_POINTER(aDoing);
*aDoing = mDoingPageRange;
return NS_OK;
}
NS_IMETHODIMP
nsSimplePageSequenceFrame::GetPrintRange(PRInt32* aFromPage, PRInt32* aToPage)
{
NS_ENSURE_ARG_POINTER(aFromPage);
NS_ENSURE_ARG_POINTER(aToPage);
*aFromPage = mFromPageNum;
*aToPage = mToPageNum;
return NS_OK;
}
// Helper Function
void
nsSimplePageSequenceFrame::SetPageNumberFormat(const char* aPropName, const char* aDefPropVal, PRBool aPageNumOnly)
{
// Doing this here so we only have to go get these formats once
nsAutoString pageNumberFormat;
// Now go get the Localized Page Formating String
nsAutoString propName;
propName.AssignWithConversion(aPropName);
PRUnichar* uPropName = ToNewUnicode(propName);
if (uPropName != nsnull) {
nsresult rv = nsFormControlHelper::GetLocalizedString(PRINTING_PROPERTIES, uPropName, pageNumberFormat);
if (NS_FAILED(rv)) { // back stop formatting
pageNumberFormat.AssignWithConversion(aDefPropVal);
}
nsMemory::Free(uPropName);
}
// Sets the format into a static data memeber which will own the memory and free it
PRUnichar* uStr = ToNewUnicode(pageNumberFormat);
if (uStr != nsnull) {
SetPageNumberFormat(uStr, aPageNumOnly); // nsPageFrame will own the memory
}
}
NS_IMETHODIMP
nsSimplePageSequenceFrame::StartPrint(nsIPresContext* aPresContext,
nsIPrintOptions* aPrintOptions)
{
NS_ENSURE_ARG_POINTER(aPresContext);
NS_ENSURE_ARG_POINTER(aPrintOptions);
PRInt16 printType;
aPrintOptions->GetPrintRange(&printType);
mPrintRangeType = printType;
aPrintOptions->GetStartPageRange(&mFromPageNum);
aPrintOptions->GetEndPageRange(&mToPageNum);
aPrintOptions->GetMarginInTwips(mMargin);
mDoingPageRange = nsIPrintOptions::kRangeSpecifiedPageRange == mPrintRangeType ||
nsIPrintOptions::kRangeSelection == mPrintRangeType;
// If printing a range of pages make sure at least the starting page
// number is valid
PRInt32 totalPages = mFrames.GetLength();
if (mDoingPageRange) {
if (mFromPageNum > totalPages) {
return NS_ERROR_INVALID_ARG;
}
}
// Begin printing of the document
nsCOMPtr<nsIDeviceContext> dc;
aPresContext->GetDeviceContext(getter_AddRefs(dc));
NS_ASSERTION(dc, "nsIDeviceContext can't be NULL!");
nsCOMPtr<nsIPresShell> presShell;
aPresContext->GetShell(getter_AddRefs(presShell));
NS_ASSERTION(presShell, "nsIPresShell can't be NULL!");
nsresult rv = NS_OK;
#if defined(DEBUG_rods) || defined(DEBUG_dcone)
{
nsIView * seqView;
GetView(aPresContext, &seqView);
nsRect rect;
GetRect(rect);
fprintf(mDebugFD, "Seq Frame: %p - [%5d,%5d,%5d,%5d] ", this, rect.x, rect.y, rect.width, rect.height);
fprintf(mDebugFD, "view: %p ", seqView);
nsRect viewRect;
if (seqView) {
seqView->GetBounds(viewRect);
fprintf(mDebugFD, " [%5d,%5d,%5d,%5d]", viewRect.x, viewRect.y, viewRect.width, viewRect.height);
}
fprintf(mDebugFD, "\n");
}
{
PRInt32 pageNum = 1;
for (nsIFrame* page = mFrames.FirstChild(); nsnull != page; page->GetNextSibling(&page)) {
nsIView* view;
page->GetView(aPresContext, &view);
NS_ASSERTION(nsnull != view, "no page view");
nsRect rect;
page->GetRect(rect);
nsRect viewRect;
view->GetBounds(viewRect);
fprintf(mDebugFD, " Page: %p No: %d - [%5d,%5d,%5d,%5d] ", page, pageNum, rect.x, rect.y, rect.width, rect.height);
fprintf(mDebugFD, " [%5d,%5d,%5d,%5d]\n", viewRect.x, viewRect.y, viewRect.width, viewRect.height);
pageNum++;
}
}
//printf("***** Setting aPresContext %p is painting selection %d\n", aPresContext, nsIPrintOptions::kRangeSelection == mPrintRangeType);
#endif
// Determine if we are rendering only the selection
aPresContext->SetIsRenderingOnlySelection(nsIPrintOptions::kRangeSelection == mPrintRangeType);
if (mDoingPageRange) {
// XXX because of the hack for making the selection all print on one page
// we must make sure that the page is sized correctly before printing.
PRInt32 width,height;
dc->GetDeviceSurfaceDimensions(width,height);
PRInt32 pageNum = 1;
nscoord y = 0;//mMargin.top;
for (nsIFrame* page = mFrames.FirstChild(); nsnull != page; page->GetNextSibling(&page)) {
nsIView* view;
page->GetView(aPresContext, &view);
NS_ASSERTION(nsnull != view, "no page view");
if (pageNum < mFromPageNum || pageNum > mToPageNum) {
// Hide the pages that won't be printed to the Viewmanager
// doesn't put them in the display list. Also, makde
// sure the child views don't get asked to print
// but my guess is that there won't be any
view->SetVisibility(nsViewVisibility_kHide);
view->SetChildClip(0,0,0,0);
view->SetViewFlags(NS_VIEW_PUBLIC_FLAG_CLIPCHILDREN);
} else {
nsRect rect;
page->GetRect(rect);
rect.y = y;
rect.height = height;
page->SetRect(aPresContext, rect);
nsRect viewRect;
view->GetBounds(viewRect);
viewRect.y = y;
viewRect.height = height;
view->SetBounds(viewRect);
y += rect.height + mMargin.top + mMargin.bottom;
}
pageNum++;
}
// adjust total number of pages
if (nsIPrintOptions::kRangeSelection == mPrintRangeType) {
totalPages = mToPageNum - mFromPageNum + 1;
} else {
totalPages = pageNum - 1;
}
}
// XXX - This wouldn't have to be done each time
// but it isn't that expensive and this the best place
// to have access to a localized file properties file
//
// Note: because this is done here it makes a little bit harder
// to have UI for setting the header/footer font name and size
//
// Get default font name and size to be used for the headers and footers
nsAutoString fontName;
rv = nsFormControlHelper::GetLocalizedString(PRINTING_PROPERTIES, NS_LITERAL_STRING("fontname").get(), fontName);
if (NS_FAILED(rv)) {
fontName.AssignWithConversion("serif");
}
nsAutoString fontSizeStr;
nscoord pointSize = 10;;
rv = nsFormControlHelper::GetLocalizedString(PRINTING_PROPERTIES, NS_LITERAL_STRING("fontsize").get(), fontSizeStr);
if (NS_SUCCEEDED(rv)) {
PRInt32 errCode;
pointSize = fontSizeStr.ToInteger(&errCode);
if (NS_FAILED(errCode)) {
pointSize = 10;
}
}
aPrintOptions->SetFontNamePointSize(fontName, pointSize);
// Doing this here so we only have to go get these formats once
SetPageNumberFormat("pagenumber", "%1$d", PR_TRUE);
SetPageNumberFormat("pageofpages", "%1$d of %2$d", PR_FALSE);
mPageNum = 1;
mPrintedPageNum = 1;
mTotalPages = totalPages;
mCurrentPageFrame = mFrames.FirstChild();
return rv;
}
NS_IMETHODIMP
nsSimplePageSequenceFrame::PrintNextPage(nsIPresContext* aPresContext,
nsIPrintOptions* aPrintOptions)
{
NS_ENSURE_ARG_POINTER(aPresContext);
NS_ENSURE_ARG_POINTER(aPrintOptions);
// Print each specified page
// pageNum keeps track of the current page and what pages are printing
//
// printedPageNum keeps track of the current page number to be printed
// Note: When print al the pages or a page range the printed page shows the
// actual page number, when printing selection it prints the page number starting
// with the first page of the selection. For example if the user has a
// selection that starts on page 2 and ends on page 3, the page numbers when
// print are 1 and then two (which is different than printing a page range, where
// the page numbers would have been 2 and then 3)
if (mCurrentPageFrame == nsnull) {
return NS_ERROR_FAILURE;
}
PRBool printEvenPages, printOddPages;
aPrintOptions->GetPrintOptions(nsIPrintOptions::kOptPrintEvenPages, &printEvenPages);
aPrintOptions->GetPrintOptions(nsIPrintOptions::kOptPrintOddPages, &printOddPages);
// Begin printing of the document
nsCOMPtr<nsIDeviceContext> dc;
aPresContext->GetDeviceContext(getter_AddRefs(dc));
NS_ASSERTION(dc, "nsIDeviceContext can't be NULL!");
nsCOMPtr<nsIPresShell> presShell;
aPresContext->GetShell(getter_AddRefs(presShell));
NS_ASSERTION(presShell, "nsIPresShell can't be NULL!");
nsCOMPtr<nsIViewManager> vm;
presShell->GetViewManager(getter_AddRefs(vm));
NS_ASSERTION(vm, "nsIViewManager can't be NULL!");
nsresult rv = NS_OK;
// See whether we should print this page
mPrintThisPage = PR_TRUE;
// If printing a range of pages check whether the page number is in the
// range of pages to print
if (mDoingPageRange) {
if (mPageNum < mFromPageNum) {
mPrintThisPage = PR_FALSE;
} else if (mPageNum > mToPageNum) {
mPageNum++;
mCurrentPageFrame = nsnull;
return NS_OK;
}
}
// Check for printing of odd and even pages
if (mPageNum & 0x1) {
if (!printOddPages) {
mPrintThisPage = PR_FALSE; // don't print odd numbered page
}
} else {
if (!printEvenPages) {
mPrintThisPage = PR_FALSE; // don't print even numbered page
}
}
if (mPrintThisPage) {
if (!mSkipPageBegin) {
PRINT_DEBUG_MSG1("\n***************** BeginPage *****************\n");
rv = dc->BeginPage();
if (NS_FAILED(rv)) {
return rv;
}
}
// XXX This is temporary fix for printing more than one page of a selection
// This does a poor man's "dump" pagination (see Bug 89353)
// It has laid out as one long page and now we are just moving or view up/down
// one page at a time and printing the contents of what is exposed by the rect.
// currently this does not work for IFrames
// I will soon improve this to work with IFrames
PRBool continuePrinting = PR_TRUE;
nscoord selectionHeight = mSelectionHeight;
PRInt32 width, height;
dc->GetDeviceSurfaceDimensions(width, height);
nsRect clipRect(0, 0, width, height);
height -= mMargin.top + mMargin.bottom;
width -= mMargin.left + mMargin.right;
nscoord selectionY = height;
nsIView* containerView = nsnull;
nsRect containerRect;
if (mSelectionHeight > -1) {
nsIFrame* childFrame = mFrames.FirstChild();
nsIFrame* conFrame;
childFrame->FirstChild(aPresContext, nsnull, &conFrame);
conFrame->GetView(aPresContext, &containerView);
containerView->GetBounds(containerRect);
containerRect.y -= mYSelOffset;
containerRect.height = height-mYSelOffset;
containerView->SetBounds(containerRect, PR_FALSE);
clipRect.SetRect(mMargin.left, mMargin.right, width, height);
nsPageFrame * pf = NS_STATIC_CAST(nsPageFrame*, childFrame);
nsRect nullClipRect(-1,-1,-1,-1);
pf->SetClipRect(&nullClipRect);
}
while (continuePrinting) {
// cast the frame to be a page frame
nsPageFrame * pf = NS_STATIC_CAST(nsPageFrame*, mCurrentPageFrame);
if (pf != nsnull) {
pf->SetPageNumInfo(mPrintedPageNum, mTotalPages);
pf->SetSharedPageData(mPageData);
}
// Print the page
nsIView* view;
mCurrentPageFrame->GetView(aPresContext, &view);
NS_ASSERTION(nsnull != view, "no page view");
PRINT_DEBUG_MSG4("SeqFr::Paint -> %p PageNo: %d View: %p", pf, mPageNum, view);
PRINT_DEBUG_MSG3(" At: %d,%d\n", mMargin.left+mOffsetX, mMargin.top+mOffsetY);
view->SetContentTransparency(PR_FALSE);
vm->Display(view, mOffsetX, mOffsetY, clipRect);
// this view was printed and since display set the origin
// 0,0 there is a danger that this view can be printed again
// If it is a sibling to another page/view. Setting the visibility
// to hide will keep this page from printing again - dwc
//
// XXX Doesn't seem like we need to do this anymore
//view->SetVisibility(nsViewVisibility_kHide);
if (!mSkipPageEnd) {
PRINT_DEBUG_MSG1("***************** End Page (PrintNextPage) *****************\n");
rv = dc->EndPage();
if (NS_FAILED(rv)) {
return rv;
}
}
if (mSelectionHeight > -1 && selectionY < mSelectionHeight) {
selectionY += height;
mPrintedPageNum++;
pf->SetPageNumInfo(mPrintedPageNum, mTotalPages);
containerRect.y -= height;
containerRect.height += height;
containerView->SetBounds(containerRect, PR_FALSE);
} else {
continuePrinting = PR_FALSE;
}
}
}
if (!mSkipPageEnd) {
if (nsIPrintOptions::kRangeSelection != mPrintRangeType ||
(nsIPrintOptions::kRangeSelection == mPrintRangeType && mPrintThisPage)) {
mPrintedPageNum++;
}
mPageNum++;
rv = mCurrentPageFrame->GetNextSibling(&mCurrentPageFrame);
}
return rv;
}
NS_IMETHODIMP
nsSimplePageSequenceFrame::DoPageEnd(nsIPresContext* aPresContext)
{
nsresult rv = NS_OK;
if (mPrintThisPage) {
nsCOMPtr<nsIDeviceContext> dc;
aPresContext->GetDeviceContext(getter_AddRefs(dc));
NS_ASSERTION(dc, "nsIDeviceContext can't be NULL!");
if(mSkipPageEnd){
PRINT_DEBUG_MSG1("***************** End Page (DoPageEnd) *****************\n");
nsresult rv = dc->EndPage();
if (NS_FAILED(rv)) {
return rv;
}
}
}
if (nsIPrintOptions::kRangeSelection != mPrintRangeType ||
(nsIPrintOptions::kRangeSelection == mPrintRangeType && mPrintThisPage)) {
mPrintedPageNum++;
}
mPageNum++;
if( nsnull != mCurrentPageFrame){
rv = mCurrentPageFrame->GetNextSibling(&mCurrentPageFrame);
}
return rv;
}
NS_IMETHODIMP
nsSimplePageSequenceFrame::SuppressHeadersAndFooters(PRBool aDoSup)
{
for (nsIFrame* f = mFrames.FirstChild(); f != nsnull; f->GetNextSibling(&f)) {
nsPageFrame * pf = NS_STATIC_CAST(nsPageFrame*, f);
if (pf != nsnull) {
pf->SuppressHeadersAndFooters(aDoSup);
}
}
return NS_OK;
}
NS_IMETHODIMP
nsSimplePageSequenceFrame::SetClipRect(nsIPresContext* aPresContext, nsRect* aRect)
{
for (nsIFrame* f = mFrames.FirstChild(); f != nsnull; f->GetNextSibling(&f)) {
nsPageFrame * pf = NS_STATIC_CAST(nsPageFrame*, f);
if (pf != nsnull) {
pf->SetClipRect(aRect);
}
}
return NS_OK;
}
#ifdef NS_DEBUG
NS_IMETHODIMP
nsSimplePageSequenceFrame::SetDebugFD(FILE* aFD)
{
mDebugFD = aFD;
for (nsIFrame* f = mFrames.FirstChild(); f != nsnull; f->GetNextSibling(&f)) {
nsPageFrame * pf = NS_STATIC_CAST(nsPageFrame*, f);
if (pf != nsnull) {
pf->SetDebugFD(aFD);
}
}
return NS_OK;
}
#endif
//------------------------------------------------------------------------------
NS_IMETHODIMP
nsSimplePageSequenceFrame::Paint(nsIPresContext* aPresContext,
nsIRenderingContext& aRenderingContext,
const nsRect& aDirtyRect,
nsFramePaintLayer aWhichLayer)
{
aRenderingContext.PushState();
aRenderingContext.SetColor(NS_RGB(255,255,255));
if (NS_FRAME_PAINT_LAYER_BACKGROUND == aWhichLayer) {
nsRect rect = mRect;
aRenderingContext.SetColor(NS_RGB(255,255,255));
rect.x = 0;
rect.y = 0;
aRenderingContext.FillRect(rect);
}
nsresult rv = nsContainerFrame::Paint(aPresContext, aRenderingContext, aDirtyRect, aWhichLayer);
PRBool clipEmpty;
aRenderingContext.PopState(clipEmpty);
return rv;
}
NS_IMETHODIMP nsSimplePageSequenceFrame::SizeTo(nsIPresContext* aPresContext, nscoord aWidth, nscoord aHeight)
{
return nsFrame::SizeTo(aPresContext, aWidth, aHeight);
}
//------------------------------------------------------------------------------
void
nsSimplePageSequenceFrame::SetPageNumberFormat(PRUnichar * aFormatStr, PRBool aForPageNumOnly)
{
NS_ASSERTION(aFormatStr != nsnull, "Format string cannot be null!");
NS_ASSERTION(mPageData != nsnull, "mPageData string cannot be null!");
if (aForPageNumOnly) {
if (mPageData->mPageNumFormat != nsnull) {
nsMemory::Free(mPageData->mPageNumFormat);
}
mPageData->mPageNumFormat = aFormatStr;
} else {
if (mPageData->mPageNumAndTotalsFormat != nsnull) {
nsMemory::Free(mPageData->mPageNumAndTotalsFormat);
}
mPageData->mPageNumAndTotalsFormat = aFormatStr;
}
}
//------------------------------------------------------------------------------
void
nsSimplePageSequenceFrame::SetDateTimeStr(PRUnichar * aDateTimeStr)
{
NS_ASSERTION(aDateTimeStr != nsnull, "DateTime string cannot be null!");
NS_ASSERTION(mPageData != nsnull, "mPageData string cannot be null!");
if (mPageData->mDateTimeStr != nsnull) {
nsMemory::Free(mPageData->mDateTimeStr);
}
mPageData->mDateTimeStr = aDateTimeStr;
}
//------------------------------------------------------------------------------
void
nsSimplePageSequenceFrame::SetPageSizes(const nsRect& aRect, const nsMargin& aMarginRect)
{
NS_ASSERTION(mPageData != nsnull, "mPageData string cannot be null!");
mPageData->mReflowRect = aRect;
mPageData->mReflowMargin = aMarginRect;
}
Reference in New Issue View Git Blame Copy Permalink