It became the default in debug mode in the last Rust/Cargo update.
Source-Repo: https://github.com/servo/servo
Source-Revision: f3220eab1e6f39b4817e5ea62755a4dc6cb15c87
<!-- Please describe your changes on the following line: -->
https://github.com/servo/servo/pull/15559#issuecomment-280003926
> With an empty incremental compilation cache (or, presumably, with incremental compilation disabled), LLVM assertions add 16% to the compilation time in debug mode, 53% (!) in release mode.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#15548 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 1afae52c47e754c6573f4a8b72fcc2e6994d253f
https://internals.rust-lang.org/t/incremental-compilation-beta/4721
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [ ] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: fc37ba9584eaba37937364db827a7ef30db85035
<!-- Please describe your changes on the following line: -->
I now have an usual setup where I use a (fast) remote machine for building, and I’m adding a hack to forward end-of-build notifications back to my laptop. This is the motivation for this change, but I kept it general enough that it could be used in other situations.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 414e2e907d3bb83de1f4ab4ae1050145cb6eadcb
<!-- Please describe your changes on the following line: -->
This removes the code and support infrastructure for the gonk port.
r? @metajack
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x ] `./mach build -d` does not report any errors
- [x ] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ x] These changes do not require tests because there are no tests
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: e3b2d6aef0bbf96cc55f1235461d757cf685f0e0
Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data:
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy --faster` does not report any errors
- [x] These changes fix#8348
Either:
- [X] These changes do not require tests because ~~I'm lazy~~ it's a configuration change, and asserting default values is usually tedious and not very helpful
Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process.
---
Allegedly, this broke the build [back in the day](https://github.com/servo/servo/pull/8519).
Going to see if it's a piece of cake to land now
Source-Repo: https://github.com/servo/servo
Source-Revision: ea38ccfdfe12c64d41ff460f358e21cafead8414
… and remove mentions of "snapshots".
We now use rust-lang.org nightly builds rather than our own snapshots.
Source-Repo: https://github.com/servo/servo
Source-Revision: f34a656b14f3992203354ffe71dc649d69b6b592
r? @Manishearth
This lets devs configure their use of CCACHE with their .servobuild file, as usual. For build environments, they can either have a .servobuild file or set the CCACHE env var to point at the ccache binary to use.
It also adds support for ccache to our travis builds. Buildbot will come in a separate commit to the saltfs repo.
It is expected that the various cargo makefiles will look at this variable and do the "right thing" to tell their native build to instead use ccache. e.g., https://github.com/servo/mozjs/pull/62
Source-Repo: https://github.com/servo/servo
Source-Revision: d16ba51b4722a84f69976ca8679af672495248c8
Currently, ld.gold is always used for linking if found on the
system. There are some cases however when one may want to opt out
from using it. This patch adds the boolean field `rustc-with-gold`
to the `[tools]` section of `.servobuild`, which if set false,
disables the use of ld.gold.
Source-Repo: https://github.com/servo/servo
Source-Revision: 273306056428e0378ebf27a1573a783aad866b5f
Require either `--dev` or `--release`, unless a default build.mode is set in `.servobuild`. This is @jinankjain's patch from #5965, rebased onto master. It is already reviewed, and only waiting for servo/saltfs#28 to be deployed.
Source-Repo: https://github.com/servo/servo
Source-Revision: c0d8488b719ea72e73e435618e015c2f705853cc
As discussed in a previous weekly meeting, this avoids changing any directories outside the repo, which is better for some automation scenarios.
The servobuild.example file has a "cache-dir" setting that restores the previous default location of `~/.servo`, which is useful for developers working with multiple clones on the same machine.
I'm not sure which setting we want to use for our buildbot hosts.
r? @metajack or @larsbergstrom
Source-Repo: https://github.com/servo/servo
Source-Revision: 74e32d119c864f527510a3ca008f88c26818df0b
This allows setting Android toolchain paths in `.servobuild`, and also adds a `--android` option that sets the correct default target and causes `mach build` to also build the APK.
Source-Repo: https://github.com/servo/servo
Source-Revision: bf7beb4837246aa53f611492b1ff0986f221a47e
