The first run loads more things into the StartupCache than are
used on the second and subsequent runs. This just ensures that if
the StartupCache diverges too far from its actual use that we will
rebuild it.
Differential Revision: https://phabricator.services.mozilla.com/D34654
I am not aware of anything that depends on StartupCache being a
zip file, and since I want to use lz4 compression because inflate
is showing up quite a lot in profiles, it's simplest to just use
a custom format. This loosely mimicks the ScriptPreloader code,
with a few diversions:
- Obviously the contents of the cache are compressed. I used lz4
for this as I hit the same file size as deflate at a compression
level of 1, which is what the StartupCache was using previously,
while decompressing an order of magnitude faster. Seemed like
the most conservative change to make. I think it's worth
investigating what the impact of slower algs with higher ratios
would be, but for right now I settled on this. We'd probably
want to look at zstd next.
- I use streaming compression for this via lz4frame. This is not
strictly necessary, but has the benefit of not requiring as
much memory for large buffers, as well as giving us a built-in
checksum, rather than relying on the much slower CRC that we
were doing with the zip-based approach.
- I coded the serialization of the headers inline, since I had to
jump back to add the offset and compressed size, which would
make the nice Code(...) method for the ScriptPreloader stuff
rather more complex. Open to cleaner solutions, but moving it
out just felt like extra hoops for the reader to jump through
to understand without the benefit of being more concise.
Differential Revision: https://phabricator.services.mozilla.com/D34652
This will not behave exactly the same if we had previously written bad
data for the entry that would fail to decompress. I imagine this is rare
enough, and the consequences are not severe enough, that this should be
fine.
Differential Revision: https://phabricator.services.mozilla.com/D30643
I thought I had already written out the patch to remove these, but
apparently not. Per discussion in the startup cache telemetry bug,
there should be no reason for doing this.
Differential Revision: https://phabricator.services.mozilla.com/D31491
In bug 1264235 we have some indication that observed bugs with the
startup cache might have been resolved, but we don't really know
until we collect data. Collecting these stats will give us the
ability to have more certainty that the startup cache is functioning
correctly in the wild.
Differential Revision: https://phabricator.services.mozilla.com/D19573
If class A is derived from class B, then an instance of class A can be
converted to B via a static cast, so a slower QI is not needed.
Differential Revision: https://phabricator.services.mozilla.com/D6861
This was done automatically replacing:
s/mozilla::Move/std::move/
s/ Move(/ std::move(/
s/(Move(/(std::move(/
Removing the 'using mozilla::Move;' lines.
And then with a few manual fixups, see the bug for the split series..
MozReview-Commit-ID: Jxze3adipUh
This switches over to using `LookupForAdd` which allows us to avoid a second
lookup when adding the entry. Addtionally `nsDependentCString` is used to
avoid copying the id string when looking up the entry.
This switches over to using `LookupForAdd` which allows us to avoid a second
lookup when adding the entry. Addtionally `nsDependentCString` is used to
avoid copying the id string when looking up the entry.
Right now, NS_GENERIC_FACTORY_SINGLETON_CONSTRUCTOR expects singleton
constructors to return already-addrefed raw pointers, and while it accepts
constructors that return already_AddRefed, most existing don't do so.
Meanwhile, the convention elsewhere is that a raw pointer return value is
owned by the callee, and that the caller needs to addref it if it wants to
keep its own reference to it.
The difference in convention makes it easy to leak (I've definitely caused
more than one shutdown leak this way), so it would be better if we required
the singleton getters to return an explicit already_AddRefed, which would
behave the same for all callers.
This also cleans up several singleton constructors that left a dangling
pointer to their singletons when their initialization methods failed, when
they released their references without clearing their global raw pointers.
MozReview-Commit-ID: 9peyG4pRYcr
Currently the Gecko Profiler defines a moderate amount of stuff when
MOZ_GECKO_PROFILER is undefined. It also #includes various headers, including
JS ones. This is making it difficult to separate Gecko's media stack for
inclusion in Servo.
This patch greatly simplifies how things are exposed. The starting point is:
- GeckoProfiler.h can be #included unconditionally;
- everything else from the profiler must be guarded by MOZ_GECKO_PROFILER.
In practice this introduces way too many #ifdefs, so the patch loosens it by
adding no-op macros for a number of the most common operations.
The net result is that #ifdefs and macros are used a bit more, but almost
nothing is exposed in non-MOZ_GECKO_PROFILER builds (including
ProfilerMarkerPayload.h and GeckoProfiler.h), and understanding what is exposed
is much simpler than before.
Note also that in BHR, ThreadStackHelper is now entirely absent in
non-MOZ_GECKO_PROFILER builds.
This patch makes the following changes to the macros.
- Removes PROFILER_LABEL_FUNC. It's only suitable for use in functions outside
classes, due to PROFILER_FUNCTION_NAME not getting class names, and it was
mostly misused.
- Removes PROFILER_FUNCTION_NAME. It's no longer used, and __func__ is
universally available now anyway.
- Combines the first two string literal arguments of PROFILER_LABEL and
PROFILER_LABEL_DYNAMIC into a single argument. There was no good reason for
them to be separate, and it forced a '::' in the label, which isn't always
appropriate. Also, the meaning of the "name_space" argument was interpreted
in an interesting variety of ways.
- Adds an "AUTO_" prefix to PROFILER_LABEL and PROFILER_LABEL_DYNAMIC, to make
it clearer they construct RAII objects rather than just being function calls.
(I myself have screwed up the scoping because of this in the past.)
- Fills in the 'js::ProfileEntry::Category::' qualifier within the macro, so
the caller doesn't need to. This makes a *lot* more of the uses fit onto a
single line.
The patch also makes the following changes to the macro uses (beyond those
required by the changes described above).
- Fixes a bunch of labels that had gotten out of sync with the name of the
class and/or function that encloses them.
- Removes a useless PROFILER_LABEL use within a trivial scope in
EventStateManager::DispatchMouseOrPointerEvent(). It clearly wasn't serving
any useful purpose. It also serves as extra evidence that the AUTO_ prefix is
a good idea.
- Tweaks DecodePool::SyncRunIf{Preferred,Possible} so that the labelling is
done within them, instead of at their callsites, because that's a more
standard way of doing things.
This patch gives some structure and order to the profiler's API.
It also renames AutoProfilerRegister as AutoProfilerRegisterThread, to match
profiler_register_thread().
NS_SetCurrentThreadName() is added as an alternative to PR_SetCurrentThreadName()
inside libxul. The thread names are collected in the form of crash annotation to
be processed on socorro.
MozReview-Commit-ID: 4RpAWzTuvPs
As far as I can tell, this covers all the remaining threads which we start
using PR_CreateThread, except the ones that are created inside NSPR or NSS,
and except for the Shutdown Watchdog thread in nsTerminator.cpp and the
CacheIO thread. The Shutdown Watchdog thread stays alive past leak detection
during shutdown (by design), so we'd report leaks if we profiled it. The
CacheIO thread seems to stay alive past shutdown leak detection sometimes as
well.
This adds a AutoProfilerRegister stack class for easy registering and
unregistering. There are a few places where we still call
profiler_register_thread() and profiler_unregister_thread() manually, either
because registration happens conditionally, or because there is a variable that
gets put on the stack before the AutoProfilerRegister (e.g. a dynamically
generated thread name). AutoProfilerRegister needs to be the first object on
the stack because it uses its own `this` pointer as the stack top address.
MozReview-Commit-ID: 3vwhS55Yzt
This patch removes checking of all the callback calls in memory reporter
CollectReport() functions, because it's not useful.
The patch also does some associated clean-up.
- Replaces some uses of nsIMemoryReporterCallback with the preferred
nsIHandleReportCallback typedef.
- Replaces aCallback/aCb/aClosure with aHandleRepor/aData for CollectReports()
parameter names, for consistency.
- Adds MOZ_MUST_USE/[must_use] in a few places in nsIMemoryReporter.idl.
- Uses the MOZ_COLLECT_REPORT macro in all suitable places.
Overall the patch reduces code size by ~300 lines and reduces the size of
libxul by about 37 KiB on my Linux64 builds.
