This helps Stylo builds to actually use the new cssparser.
Source-Repo: https://github.com/servo/servo
Source-Revision: 535d0e421a3188473fc0c3cefca569c1276c4804
<!-- Please describe your changes on the following line: -->
- Fix crop_area_bytes_length calculation (the height was multiplied by itself)
- Add tests for this error and for the case that the width is multiplied by itself
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#15386
<!-- Either: -->
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 594a679002a5d74da761c17574ad5383a130b55a
<!-- Please describe your changes on the following line: -->
https://github.com/servo/rust-cssparser/pull/123
In particular, `match_ignore_ascii_case` now supports the full `match` syntax.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: fbfcfc2dbe838ef011f14a863003a575078f455f
<!-- Please describe your changes on the following line: -->
<s>Depends on https://github.com/servo/rust-cssparser/pull/122.</s>
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 94e563e4d9292d7b19ce061e070cda358e822172
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 216a89f7766dd366c4afbeae42cf6e1fb4f67349
<!-- Please describe your changes on the following line: -->
WebVR API Implementation with HTC Vive support on Windows. The current implementations only enables the WebVR support on Windows. In other platforms the API is available on JavaScript but navigator.vr.getDisplays() returns an empty array. This will change when we add support for more VR providers and platforms ;)
Info about the architecture:
https://blog.mozvr.com/webvr-servo-architecture-and-latency-optimizations/
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
Proprietary openvr.dll must be copied next to servo.exe in order to test on HTC Vive (https://github.com/ValveSoftware/openvr/tree/master/bin/win64) I have added some of the official WebVR samples for testing. Switch on your headset and run:
mach run tests/html/webvr/room-scale.html
Source-Repo: https://github.com/servo/servo
Source-Revision: 518ef39cfd429082dd8dc0d5b13e2db637d08a53
<!-- Please describe your changes on the following line: -->
Remove azure (canvas crate) dependency from canvas_traits crate.
There might be some tests that are failing due to changed implementation location. I will take a look at this pull request build status.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14108
<!-- Either: -->
- [x] These changes do not require tests because no methods were modified or moved
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 32281030149a9e40d46310de0025a8f522798f21
<!-- Please describe your changes on the following line: -->
This PR removes the `util` crate.
* Replaced the `spawn_named` and `clamp` functions by appropriate uses of `std:🧵:Builder::spawn`, `std::cmp::min` and `std::cmp::max`.
* Moved `opts`, `prefs` and `resource_files` into a new `config` crate.
* Moved `remutex` and `geometry` into their own crates.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes do not require tests because they are refactorings
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 4eb653817f87e5fb47de34356f558eb76ecbca9f
<!-- Please describe your changes on the following line: -->
Related PR: https://github.com/servo/webrender/pull/519
Implement WebGLContext resize (canvas.width & canvas.height). I have tested:
- Fixes WebGL apps that initialize canvas size after calling canvas.getContext("webgl")
- Support WebGL apps that change the canvas size & viewport on window.onresize
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 94eefc4001e0998fcea5a35943da73624ea82b13
<!-- Please describe your changes on the following line: -->
Changes necessary to build servor with webrender 0.10.0
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [ ] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: e1eff691f8a1d8c9c7ab33344364f0419626b80e
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [x] These changes do not require tests because refactoring.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 958806512054edc1cdf6522e5a882c2c8d692fe1
This removes paint threads, rust-layers dependency, and changes
optional webrender types to be required.
The use_webrender option has been removed, however I've left
the "-w" command line option in place for now so that wpt
runner can continue to pass that. Once it's removed from there
we can also remove the -w option.
Once this stage is complete, it should be fine to change the
display list building code to generate webrender display
lists directly and avoid the conversion step.
Source-Repo: https://github.com/servo/servo
Source-Revision: f96718d03da969510dc992699cb6f25c2e21ae1e
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because it's a small refactoring.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: ca9bc23b391b92d1a6e16f565b531a7fac68852c
<!-- Please describe your changes on the following line: -->
Added a `license = "MPL-2.0"` field to all our `Cargo.toml` files, and added a check to `test-tidy` that the license is present.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#12434
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 650d1d1185eecdc4c8b605bb0290ece7de839015
canvas: Deallocate WebRender images on canvas
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#11062.
- [x] These changes do not require tests because it's wr-only.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
r? @glennw
Source-Repo: https://github.com/servo/servo
Source-Revision: 1ff8d875dddb81c2697e155cc954d106c5433055
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [x] These changes do not require tests because refactoring.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
This should give us the chance to use WebRender by default in OSX.
r? @pcwalton
cc @glennw @larsbergstrom
Source-Repo: https://github.com/servo/servo
Source-Revision: 68aca87e305138b2851c853149e0606756eb02b8
This automates something that I find myself frequently commenting on in PRs.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 3ec20d9cf517c67f4d280e8958cc58c4c2b4fbb2
Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data:
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy --faster` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
Either:
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because _____
Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process.
Source-Repo: https://github.com/servo/servo
Source-Revision: 2572a7d2c5ba90cc78f6be10bb29c2e8fbc8f250
* Sections like `[dependencies.foo]` can be entries in a `[dependencies]` section with the `{key = value}` syntax.
* Per-target dependencies can be expressed with more general `cfg(…)` conditions instead of exact target triples: https://github.com/rust-lang/cargo/pull/2328
Source-Repo: https://github.com/servo/servo
Source-Revision: 2729864af73d62719ea0fd55cef417c43bdd951e
As discussed in #9256. It should solve second half of the issue.
Source-Repo: https://github.com/servo/servo
Source-Revision: 0a3a50a1293e4e8f3e04161014d03802765140c7
Fixes#9599
"This is the first Rust code I have ever written" (and also my first time writing real browser code, it's been quite the learning experience).
Some questions:
> For really fast CPU results, use integer SIMD instructions to handle more than one pixel at a time.
This was out of the scope of #9599, right? I started looking into doing that, but it seems to be a lot more work than the `E-easy` label would suggest. [`std::simd`](https://doc.rust-lang.org/1.0.0/std/simd/index.html) is marked as "unstable", is that a blocker?
> 128 can be added before dividing to round more accurately.
@michaelwu, what did you mean by that?
Also, the #9599 is `Do not use lookup tables for {Get,Put}ImageData operations`, but we only use lookup tables for the `Put`, not the `Get`, right?
Sorry for all the noobish questions.
Source-Repo: https://github.com/servo/servo
Source-Revision: 4e4a213c73d49641fdfbf83c31152295d4856ae0
