<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#19392 and fix#19393 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: fa82a6bbcef23c1ff4dc9d34f5f4ad75b622b3be
<!-- Please describe your changes on the following line: -->
Measure DOM completion without iframes. This is in support of measuring when the main document is loaded, ignoring secondary content, e.g. ads.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#19561
- [X] There are tests for these changes
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: d832e1b8f843612b4cb124d8c4eb9dce94e92d50
This makes it a bit easier to compare results with other browsers.
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
Source-Repo: https://github.com/servo/servo
Source-Revision: c4482ebe77fd6ac517dc75b7084d08e3a82a7036
<!-- Please describe your changes on the following line: -->
fixes a panic and aligns with spec
I've also added checks around each mutable borrow of the tokenizer to see if we can catch any other panics
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#18930 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 712d75af01e02fe9689d18d7a94c89318e39f52b
<!-- Please describe your changes on the following line: -->
follow up from #18670, fixing #19099
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#19099 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7d13e5b83c346d06dc68f22857a17f30ea797402
It was removed from the spec, there's no reason to keep it in tree.
Source-Repo: https://github.com/servo/servo
Source-Revision: a509ebf90ccd24ef80b27737faefa340a5af8916
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#18997 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: fa319170ebb34afcdfc120b7c3e47fe5b1c21210
See #18809
Still haven't had time to test it but it should fix the tests failures that appeared in m-c
Source-Repo: https://github.com/servo/servo
Source-Revision: fe4139b779b3af749ec1426ddf4e1393c7b85442
<!-- Please describe your changes on the following line: -->
Added time to interactive metrics and refactored metrics/lib
I need to write tests, but wanted to submit the PR for review
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [ ] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: e438b094f675469b8bdbb1ab4ff84c374fc399d4
Fix for a bug I didn't catch in #18957. Thanks to @rharel for pointing it out.
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix issue #18943 and bug in PR #18957
- [X] These changes do not require tests as specified in #18943
r?@jdm
Source-Repo: https://github.com/servo/servo
Source-Revision: d9ede4dc054ba2da322bd21af1cfa75b85e1dc65
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes do not require tests because they are refactoring only
Source-Repo: https://github.com/servo/servo
Source-Revision: 2b03a9974c61d1481d4b40351ff1305ad0b26588
Added an enum with the mouse event options for `fire_mouse_event` and refactored the `event_name` parameter to take the enum as argument.
I also added two options (Leave and Enter) which are noted as todo in the comments.
- [x] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These Changes fix#18943.
- [X] These changes do not require tests because the issue said a clean build suffices.
Source-Repo: https://github.com/servo/servo
Source-Revision: 1b08bfc5c0f49dabf205c9f3c32d35c21ea0042c
It still needs dependencies update to remove all the other bitflags
versions.
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes do not require tests because it's a dependency update
Source-Repo: https://github.com/servo/servo
Source-Revision: fe16c1d5c3c9084da0ccb85af599d6ec0f8ab20b
This is the second half of switching over to WebRender for hit testing.
Now that WebRender gives us the location of the hit tested point in the
display item, we can use that to calculate text index.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they shouldn't change behavior.
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 4cf2ce66fc4f970a47ab1fb4b9aa1a55282640f7
Servo currently uses `heapsize`, but Stylo/Gecko use `malloc_size_of`.
`malloc_size_of` is better -- it handles various cases that `heapsize` does not
-- so this patch changes Servo to use `malloc_size_of`.
This patch makes the following changes to the `malloc_size_of` crate.
- Adds `MallocSizeOf` trait implementations for numerous types, some built-in
(e.g. `VecDeque`), some external and Servo-only (e.g. `string_cache`).
- Makes `enclosing_size_of_op` optional, because vanilla jemalloc doesn't
support that operation.
- For `HashSet`/`HashMap`, falls back to a computed estimate when
`enclosing_size_of_op` isn't available.
- Adds an extern "C" `malloc_size_of` function that does the actual heap
measurement; this is based on the same functions from the `heapsize` crate.
This patch makes the following changes elsewhere.
- Converts all the uses of `heapsize` to instead use `malloc_size_of`.
- Disables the "heapsize"/"heap_size" feature for the external crates that
provide it.
- Removes the `HeapSizeOf` implementation from `hashglobe`.
- Adds `ignore` annotations to a few `Rc`/`Arc`, because `malloc_size_of`
doesn't derive those types, unlike `heapsize`.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix https://bugzilla.mozilla.org/show_bug.cgi?id=1409255
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because testing is on the Gecko side.
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 4c538b642e4bdfbf42c522c5a59c258a6d14546e
This trades quite a bit of complicated code in Servo for few more
messages and a significant performance improvement. In particular,
WebRender can search the entire display list at once instead of
ping-ponging down the pipeline tree. This allows us to send mouse
events to the correct pipeline immediately.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they should not change behavior.
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: ca08271345f78fa881c174545f5b69a8ccb78143
Fixes warnings from rust-lang/rust#44229 when `--enable-commonmark` is passed to rustdoc.
This is mostly a global find-and-replace for bare URIs on lines by themselves in doc comments.
---
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes do not require tests because they are doc formatting changes only
Source-Repo: https://github.com/servo/servo
Source-Revision: 0e62a5829b7c29ae2667a21a439aff1e89201bf3
http://www.robohornet.org gives a score of 101.36 on master, and 102.68 with this PR. The latter is slightly better, but probably within noise level. So it looks like this PR does not affect DOM performance.
This is expected since `Box::new` is defined as:
```rust
impl<T> Box<T> {
#[inline(always)]
pub fn new(x: T) -> Box<T> {
box x
}
}
```
With inlining, it should compile to the same as box syntax.
Source-Repo: https://github.com/servo/servo
Source-Revision: a9022be0c3e30249845ca5947ac0c0a6743c7991
This simplifies the logic in the layout_thread and makes it clearer
which types of reflows generate display lists and cause display updates.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they shouldn't change behavior.
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 65d9b345bb2a588f41b0d6cdca1aaca2c3c69205
The elephant 🐘 (not PHP's) still remains in the room: `Rc<Promise>` shouldn't require `#[allow(unrooted_must_root)]`.
Source-Repo: https://github.com/servo/servo
Source-Revision: 4af0d9acb3f5724cac9f40a46ee03ab364a053bc
<!-- Please describe your changes on the following line: -->
Document shouldn't own location, Window should.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#18438
- [X] These changes do not require tests because it's an intermittent
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 6a791cd7f26b42a6688099bea203c21fb3c9cc12
This is the first step that will allow us to cache UA sheets across documents.
Source-Repo: https://github.com/servo/servo
Source-Revision: d461347adf47c47a73a7242e23d57a5741872d4f
<!-- Please describe your changes on the following line: -->
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#18371.
<!-- Either: -->
- [X] There are tests for these changes
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
r? @emilio
Source-Repo: https://github.com/servo/servo
Source-Revision: 85167c8b7d2fb0e0e90283db750b601d789cd6ea
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#18286 and #18308
This patch makes the Performance Timeline API work in workers, removes the exposure of `Performance.timing` in workers and sets the appropriate value of `Performance.now()` in workers.
Source-Repo: https://github.com/servo/servo
Source-Revision: 42de8e3d3fe8927b4730a7a42880eb46f743384a
<!-- Please describe your changes on the following line: -->
change function signature to get type name via intrinsics
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#18354 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because stated in the PR that it was not required
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 887b011288f832634eed634769b5d2ec48f0e24d
<!-- Please describe your changes on the following line: -->
Automatically verify that derive() lists are alphabetically ordered #18172
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#18172 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 474369618965569407d127b1e8c481e757cc59d3
This will allow tracking whether there have been only additions to the
stylesheet set, and in that case don't destroy and completely rebuild the
invalidation map.
This is on top of #18143.
Source-Repo: https://github.com/servo/servo
Source-Revision: 019b125963d4db9b18991d3ab06042e475c83f9f
This is a patch that unifies a bit how Gecko and Stylo stylesheets work, in
order to be able to eventually move the stylesheets into the stylist, and be
able to incrementally update the invalidation map.
This is on top of #18113
Source-Repo: https://github.com/servo/servo
Source-Revision: 81a382cb00134450f3723caf682bb5ca8cca317f
Fix: #17226#17200#17201
This is work in progress. Some tests still fail.
I'd like to get early feedback as it's a pretty large PR.
There is nothing fundamentally new. Basically, I added TopLevelBrowsingContrextId to the relevant messages between the embedder, the compositor and the constellation, and enforced the PipelineId to be attached to each ScriptMsg (see #17201).
I unaliased all the ScriptMsg. It was getting difficult to understand the nature of the message as ScriptMsg was used aliased CompositorMsg sometimes (CompositorMsg is an actually type of message already). I renamed constellation_chan to script_to_constellation_chan, again, for clarification.
This cleanup code is necessary for #15934 and for tabs support.
/cc @asajeffrey can I ask you to look at this? No need for a formal review, I need feedback at this stage.
Source-Repo: https://github.com/servo/servo
Source-Revision: 74558990b258cb55f230ebe8ec3fc557fd286f94
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: a087fee4b4daa76c7e1677b0adae512fb6c87d04
<!-- Please describe your changes on the following line: -->
Add tidy check for keywords with more than one space afterwards.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#17700 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7d95fb8e49dd0eb9fa9efb9d70008f5f9bf20a83
The `stylearc` alias is left there temporarilly and will be removed completely in a later commit/PR where also `components/style/gecko/generated/structs_{debug|release}.rs` are re-generated (they still use the old alias).
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#17768 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because no new features / only refactoring
Source-Repo: https://github.com/servo/servo
Source-Revision: 31228c18499d1c7f68b6b64b559354c768e81215
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#17651
Source-Repo: https://github.com/servo/servo
Source-Revision: eb26194dd12f1430e9089512d54973d3b12b2e36
