There's two code changes in this patch:
- The update to the visual viewport that was happening just before positioning
the fixed items gets moved to happen after determining the scrollbars for
the root scrollframe. This moves it a little bit earlier, to basically the
earliest point at which the visual viewport can actually be computed, since
it depends on the presence of the root scrollframe's scrollbars.
More importantly, this change sets the visual viewport without checking to
see if one was already set, as the old code did. This means every reflow
of the root scrollframe on a presShell with an MVM will now have a visual
viewport set. Previously the visual viewport would only get set for the first
time when the MVM got a load or first-paint event, and then would get updated
for subsequent reflows. The net effect here is that the visual viewport is
set earlier, and this can sometimes eliminate extra reflows from after the
load event, because everything is already in a consistent state.
- The NotifyResizeReflow call to MVM is replaced by a NotifyReflow call that
runs before every reflow, instead of just on resizes. Note that the
NotifyReflow also doesn't update the visual viewport like NotifyResizeReflow
used to do, because that is taken care of by the above-mentioned code change
to set the visual viewport.
This is desirable because there are things that run during reflow that attempt
to read the display size from the MVM, and they were getting a zero size
for reflows that happened before the first resize or load/first-paint events.
Now they get a valid display size on every reflow, and so again this allows
fewer overall reflows as the code converges to a stable state faster.
Together these changes ensure that every reflow has access to up-to-date
properties (display size, mobile viewport size, visual viewport size) from the
MVM. This eliminates unnecessary reflows because of out-of-order computations
based on stale values and such. Therefore the number of reflows goes down,
which is reflected by the changes to the crashtest assertion counts.
Differential Revision: https://phabricator.services.mozilla.com/D81375
While it makes sense to do this when the visual viewport offset changes, it
doesn't make as much sense when the visual viewport size changes. The size can
change whenever non-overlay scrollbars are added or removed to the root
scrollframe, which is an operation that seems like it shouldn't interfere with
scroll anchoring at all.
Differential Revision: https://phabricator.services.mozilla.com/D81071
After the above, I don't think this is needed anymore, because we
shouldn't be looking at the widget size from layout.
It also shouldn't cause more reflows on desktop at least, because of the
early out in ResizeReflowIgnoreOverride before calling
SimpleResizeReflow().
Differential Revision: https://phabricator.services.mozilla.com/D80731
We did not pass FLAG_HIGH_QUALITY_SCALING down to the document used to
rasterize the SVG to a surface, resulting in embedded raster images to
not use high quality downscaling.
Differential Revision: https://phabricator.services.mozilla.com/D56422
There's a lot of documents that get created (about:blank and friends) and this
makes it easier to figure out which MVM we actually care about.
Differential Revision: https://phabricator.services.mozilla.com/D80085
This avoids arbitrary precision loss when computing REM units and so on,
which is particularly important if we ever change the base of our app
units (but useful regardless).
Differential Revision: https://phabricator.services.mozilla.com/D79928
There's a lot of documents that get created (about:blank and friends) and this
makes it easier to figure out which MVM we actually care about.
Differential Revision: https://phabricator.services.mozilla.com/D80085
There's no need to put this in nsLayoutUtils since it's so closely bound
to presShell anyway. So we move it from being a static nsLayoutUtils function
that takes a PresShell pointer, to being a method on the PresShell itself.
Two functional changes here:
1. Don't run the MaybeReflowForInflationScreenSizeChange code unless the
visual viewport actually changes
2. Run the MaybeReflowForInflationScreenSizeChange if the visual viewport
is reset.
These functional changes can be logically thought of as "group the font-
inflation reflow stuff together with the other visual-viewport-triggered
reflow stuff".
Depends on D80040
Differential Revision: https://phabricator.services.mozilla.com/D80041
There are two parts here. One is the "backstop" in the scrollframe's
ReflowFinished callback, that recomputes the visual viewport size if layout
scrollbars are being used in the root scrollframe. This ensures that the
visual viewport gets resized properly after a reflow, possibly at the expense
of a second reflow to reposition fixed-pos items.
There is also an update to the visual viewport during the reflow itself, after
we have reflowed the in-flow contents (including the root scrollframe) but
before we reflow the fixed-pos items. This allows us to avoid the second reflow
by using the new visual viewport for positioning the fixed-pos items correctly.
This early reflow also skips marking things for a second reflow.
This patch fixes a problem described in bug 1644271 comment 2, among other
things. Specifically, it ensures that when the scrollbar properties (e.g.
maxpos, minpos) are computed, they are computed using an up-to-date visual
viewport size. The up-to-date visual viewport size correctly excludes the space
taken up by non-overlay scrollbars, which wasn't happening without this patch.
Depends on D80039
Differential Revision: https://phabricator.services.mozilla.com/D80040
The existing comment in BrowserChild::RecvUpdateDimensions may have been
accurate at some point in the past, but I'm seeing cases where setting
the content viewer size itself triggers a reflow. Since the widget size
hasn't been updated yet, the reflow uses some stale values and produces
incorrect outcomes. This patch ensures both the content viewer and widget
get their sizes updated first, and only then do we do the reflow.
Differential Revision: https://phabricator.services.mozilla.com/D79885
This avoids arbitrary precision loss when computing REM units and so on,
which is particularly important if we ever change the base of our app
units (but useful regardless).
Differential Revision: https://phabricator.services.mozilla.com/D79928
For regular elements, whenever -moz-appearance is used, the CSS background is
ignored. Root elements were behaving specially, and the background color also
needed to be adjusted.
For example, for Windows 7, we have the following CSS rule;
```
:root {
background-color: transparent;
-moz-appearance: -moz-win-borderless-glass;
}
```
This change makes the root element more consistent with other elements, if non-glass
-moz-appearance values are used. For example, for platforms where `-moz-appearance: dialog`
has (partially) transparent rendering, the extra `background-color: transparent`
declaration is now no longer necessary.
This patch preserves the behavior for Windows 7 glass because there are several other
things that would need to be adjusted for the glass case (see bug 1601183 and bug 1599366).
Maybe we can just wait until we drop Windows 7 entirely, to clean this up.
This change does not let content documents opt out of forced opaqueness:
Root content documents still get an opaque background color from an existing
check further down in this method.
Differential Revision: https://phabricator.services.mozilla.com/D51459
This is important because if the apz.allow_zooming pref is enabled (and
eventually even without that pref), VisualViewportOnly-type MVMs do set
the visual viewport size based on the display size and zoom, and so need
to be updated when those change.
It's also important to keep the mMobileViewportSize updated and in sync
with the display size, because it may get used via ComputeIntrinsicResolution
when fullscreening.
Differential Revision: https://phabricator.services.mozilla.com/D79594
It does not make sense to ask for layout coordinates relative to
a chrome document. If the chrome document has a zoomed (RCD)
descendant in the same process, this means we do not apply the
visual-to-layout transform when later entering the RCD.
Depends on D79588
Differential Revision: https://phabricator.services.mozilla.com/D79589
This is important because if the apz.allow_zooming pref is enabled (and
eventually even without that pref), VisualViewportOnly-type MVMs do set
the visual viewport size based on the display size and zoom, and so need
to be updated when those change.
Differential Revision: https://phabricator.services.mozilla.com/D79594
Allowing the MVM to control the reflow means that the requested reflow size
is ignored, and instead the existing CSS/layout viewport is used. This is
undesirable for calls to SizeToContent(), where the intent is to do a reflow
to figure out the smallest amount of space the content fits in.
In general though unless we are using mobile viewport sizing we shouldn't be
needing the MVM to drive reflows.
Differential Revision: https://phabricator.services.mozilla.com/D79225
The MVM is needed for both handling of meta-viewport tags and APZ zooming.
However, the set of functionality needed in the two modes are not the same.
This patch adds a mechanism to create an MVM with a flag that lets it know
which mode it is operating in. Eventually we may want to split this into two
or more classes but for now this seems like a reasonable way forward.
The flag is currently set on the MVM on creation based on whether or not the
meta-viewport support is needed. There's no code that meaningfully *uses* the
flag yet, so this patch should have no functional change. The bulk of the
patch is ensuring that we appropriately destroy and re-create the MVM if the
flag required changes.
Differential Revision: https://phabricator.services.mozilla.com/D79224
This patch is a fairly mechanical conversion. The old `nullptr` gets converted
to ScrollOrigin::NotSpecified, and all the other possible values get corresponding
values in the new ScrollOrigin enum. A few switch statements are introduced to
clean up big if statements, but other than that, additional cleanups will happen
in later patches.
Differential Revision: https://phabricator.services.mozilla.com/D78438
This adjusts the position at which the drag images appear when doing drag
actions, so that they appear where you would expect when APZ zoom is applied.
There doesn't seem to be a good way to test this, but I did a bunch of manual
testing, with all the possible expansions of this sentence:
Dragging {a small image,a large image,some text} in {an iframe,the root
content document}, with {,no }zooming applied.
In all cases, the drag image/text should appear such that the part under the
cursor is the same as what was under the cursor on the original rendering of
the page.
Differential Revision: https://phabricator.services.mozilla.com/D77436
When rasterizing the drag image, we pick up the resolution from ancestor
presShells and ensure that the drag image is rasterized at that resolution,
with appropriate limits for memory usage.
Differential Revision: https://phabricator.services.mozilla.com/D77435
Make it show the contents of style sheets (as it used to before Stylo)
and make it work in --disable-debug --enable-layout-debugger builds.
Differential Revision: https://phabricator.services.mozilla.com/D76640
In favor of the NativeAnonymous versions which they forward to.
Done automatically with:
rg -l 'IsInAnonymousSubtree' | xargs sed -i 's/IsInAnonymousSubtree/IsInNativeAnonymousSubtree/g'
And removing the function definitions afterwards.
Differential Revision: https://phabricator.services.mozilla.com/D76681
This patch is generated by using my editor's rename functionality.
In the next patch, `nsIFrame::` prefix is going to be removed manually
from all the ChildLists() calls.
Differential Revision: https://phabricator.services.mozilla.com/D75893
This is the "core" change of the patch series, which causes most
existing layout codepaths to correctly factor in the visual to
layout transform (or its inverse), as long as the callers correctly
propagate it in the correct ViewportType.
Differential Revision: https://phabricator.services.mozilla.com/D68920
This "upgrades" various nsLayoutUtils functions which take as inputs
a set of coordinates and a frame that the coordinates are relative to,
to accept a RelativeTo object instead of a frame.
Most of the patch is just dumb propagation, but the few places where
we use an explicit ViewportType::Visual are important. There are
probably a few other places I've overlooked, but this seems to cover
the important ones that come up commonly.
There are undoubtedly other functions into which we can propagate
RelativeTo, in this patch I've propagated it as far as necessary
for my needs in this bug (mainly GetTransformToAncestor() and
GetEventCoordinatesRelativeTo()).
Differential Revision: https://phabricator.services.mozilla.com/D68919
Prior to this bug, it was necessary to handle non-e10s specially, because the
resolution was being unapplied at the process boundary, and in non-e10s there
was no process boundary.
The remaining patches in this bug move the resolution unapplication away from
the process boundary in all cases, making special handling for non-e10s
unnecessary.
Differential Revision: https://phabricator.services.mozilla.com/D68273
Even in comm-central and BlueGriffon, `nsISelectionController::*ForDelete()`
are not used. Therefore, we can remove them safely.
Differential Revision: https://phabricator.services.mozilla.com/D72296
