http://www.robohornet.org gives a score of 101.36 on master, and 102.68 with this PR. The latter is slightly better, but probably within noise level. So it looks like this PR does not affect DOM performance.
This is expected since `Box::new` is defined as:
```rust
impl<T> Box<T> {
#[inline(always)]
pub fn new(x: T) -> Box<T> {
box x
}
}
```
With inlining, it should compile to the same as box syntax.
Source-Repo: https://github.com/servo/servo
Source-Revision: a9022be0c3e30249845ca5947ac0c0a6743c7991
Fix: #17226#17200#17201
This is work in progress. Some tests still fail.
I'd like to get early feedback as it's a pretty large PR.
There is nothing fundamentally new. Basically, I added TopLevelBrowsingContrextId to the relevant messages between the embedder, the compositor and the constellation, and enforced the PipelineId to be attached to each ScriptMsg (see #17201).
I unaliased all the ScriptMsg. It was getting difficult to understand the nature of the message as ScriptMsg was used aliased CompositorMsg sometimes (CompositorMsg is an actually type of message already). I renamed constellation_chan to script_to_constellation_chan, again, for clarification.
This cleanup code is necessary for #15934 and for tabs support.
/cc @asajeffrey can I ask you to look at this? No need for a formal review, I need feedback at this stage.
Source-Repo: https://github.com/servo/servo
Source-Revision: 74558990b258cb55f230ebe8ec3fc557fd286f94
<!-- Please describe your changes on the following line: -->
Fixes#13424
As of now this PR (Work in Progress), will try to implement (partially) on algorithms namely : [Schedule_Job](https://w3c.github.io/ServiceWorker/#schedule-job-algorithm), [Run_Job](https://w3c.github.io/ServiceWorker/#run-job-algorithm), [Register_Job](https://w3c.github.io/ServiceWorker/#register-algorithm).
An issue that needs to be addressed:
Resolving the promise value after queueing it as a `dom_manipulation_task` by wrapping it in a runnable `RunJobHandler` (which holds a `TrustedPromise`) and trying to call `resolve_native` results in a crash. [stack trace](http://paste.ofcode.org/zdjJ9npBgX6JsyWQkJjnYk)
@jdm I am not sure what's causing the crash ?
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 0ea0ade71dfd445841035abb5f3ea35161b075d2
<!-- Please describe your changes on the following line: -->
Still needs a bunch of code in net to be converted in order to get more
advantage of this for images and stuff, but meanwhile this should help quite a
bit with #13778.
Still wanted to get this in.
r? @SimonSapin
Source-Repo: https://github.com/servo/servo
Source-Revision: 22aebdf5d41a3509cd6515ccf5edcdf33715a76d
This is a rebased version of PR #11595
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#11485
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because: no code logic was changed
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: f70fc6644ddb142627c188ebbde2cc0a0282f9b4
Globals in that PR are now represented by the fake IDL interface `GlobalScope`.
Source-Repo: https://github.com/servo/servo
Source-Revision: a6e4b5bb86ad707a0863acff87344ca4239cfd2c
<!-- Please describe your changes on the following line: -->
The old specification URL is
https://slightlyoff.github.io/ServiceWorker/spec/service_worker/, which has
been replaced by the new one at https://w3c.github.io/ServiceWorker/.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#13408 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because all the changes are in commented parts of the code.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
The old specification URL is
https://slightlyoff.github.io/ServiceWorker/spec/service_worker/ has
been replaced by the new one at https://w3c.github.io/ServiceWorker/.
Source-Repo: https://github.com/servo/servo
Source-Revision: d00639c55f9a342765483d347a3c29d4647f7411
<!-- Please describe your changes on the following line: -->
Fixes#12773
r? @jdm
Changes:
* Implements `postMessage` on `ServiceWorker` object.
* Removes unused channels from sw and their scopes.
* Fixes a crash when calling `scope.script_chan()` in sw-scopes event handling.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#12773
<!-- Either: -->
- [X] There are tests for these changes at `tests/html/service-worker`
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 0ec4ea4ee188f2e5db9d387d182c34a9d97d07cd
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes are part of #11091
<!-- Either: -->
- [X] There are tests for these changes at my [gh-pages](https://github.com/creativcoder/gsoc16/tree/gh-pages) branch to test the instantiation of service workers by their manager, but will need to discuss how that would integrate into master.
Changes:
- Introduces a `ServiceWorkerManager`, which maintains an map of registered service workers as well as a map of active workers keyed by their `scope_url`.
- Adds the initialization of ServiceWorkerManager, at the `script::init()`, which makes it available as a single entity listening for requests from different script threads.
- Adds a timeout thread in `serviceworkerglobalscope`, which terminates the workers, after a timeout of 60 secs, thereby removing it from the active workers list.
- Adds the matching of scope urls, in longest prefix way rather than path structural way, according to [spec](https://slightlyoff.github.io/ServiceWorker/spec/service_worker/#scope-match-algorithm).
- Make ServiceWorkerManager, the holder of network sender, instead of script thread, so it can send `CustomResponse`.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 513811f6b40d522bc425c2588320b889614f2973
The existing `Rooted` and `RootedVec` users were migrated the the following two macros:
```rust
let x = Rooted::new(cx, value);
// Was changed to:
rooted!(in(cx) let x = value);
// Which expands to:
let mut __root = Rooted::new_unrooted(value);
let x = RootedGuard::new(cx, &mut __root);
```
```rust
let mut v = RootedVec::new();
v.extend(iterator);
// Was changed to:
rooted_vec!(let v <- iterator);
// Which expands to:
let mut __root = RootableVec::new();
let v = RootedVec::new(&mut __root, iterator);
```
The `rooted!` macro depends on servo/rust-mozjs#272.
These APIs based on two types, a container to be rooted and a rooting guard, allow implementing both `Rooted`-style rooting and `Traceable`-based rooting in stable Rust, without abusing `return_address`.
Such macros may have been tried before, but in 1.9 their hygiene is broken, they work only since 1.10.
Sadly, `Rooted` is a FFI type and completely exposed, so I cannot prevent anyone from creating their own, although all fields but the value get overwritten by `RootedGuard::new` anyway.
`RootableVec` OTOH is *guaranteed* to be empty when not rooted, which makes it harmless AFAICT.
By fixing rust-lang/rust#34227, this PR enables Servo to build with `-Zorbit`.
---
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fixrust-lang/rust#34227
- [x] These changes do not require tests because they are not functional changes
Source-Repo: https://github.com/servo/servo
Source-Revision: 80cb0cf8214fd52d2884724614c40cb278ee7575
