Fixes warnings from rust-lang/rust#44229 when `--enable-commonmark` is passed to rustdoc.
This is mostly a global find-and-replace for bare URIs on lines by themselves in doc comments.
---
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes do not require tests because they are doc formatting changes only
Source-Repo: https://github.com/servo/servo
Source-Revision: 0e62a5829b7c29ae2667a21a439aff1e89201bf3
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#18916
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7704fa086ca9b9317b004b87e809ebcb10c344f9
http://www.robohornet.org gives a score of 101.36 on master, and 102.68 with this PR. The latter is slightly better, but probably within noise level. So it looks like this PR does not affect DOM performance.
This is expected since `Box::new` is defined as:
```rust
impl<T> Box<T> {
#[inline(always)]
pub fn new(x: T) -> Box<T> {
box x
}
}
```
With inlining, it should compile to the same as box syntax.
Source-Repo: https://github.com/servo/servo
Source-Revision: a9022be0c3e30249845ca5947ac0c0a6743c7991
<!-- Please describe your changes on the following line: -->
I am not sure whether my solution is in the right way.
@jdm Can you give some advises?
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [ ] `./mach test-tidy` does not report any errors
- [ ] These changes fix#18776 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: adb45eb7279bad6e7048e810e3c2108bf2b628bb
This type is a lot of complexity related to a very specific thing such as the
hover and active quirk.
Instead of that, move `nesting_level` to `MatchingContext`, and simplify all
this computing whether the quirk applies upfront, for each complex selector we
test.
This is less error-prone, and also allows simplifying more stuff in a bit.
Also, this makes the hover and active quirk work in Servo with no extra effort.
Source-Repo: https://github.com/servo/servo
Source-Revision: a200fb4b9df4e7461b4238fe3a6d49881f438e25
Casting `*const T` to `*const U` with `U: Sized` is allowed even if `T: ?Sized`. This safely extracts the data pointer out of a trait object, without relying on the memory representation of trait objects.
Source-Repo: https://github.com/servo/servo
Source-Revision: 86a5135ffaa60d4743b6f6950fc395c2615e85ba
Rebased from #17896.
---
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#14975 (github issue number if applicable).
- [x] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: e3624e62a4b247d7af5e783fcd4205d2914b6aab
Reviewed by Xidorn and Manish in https://bugzilla.mozilla.org/show_bug.cgi?id=1397626.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 3b7a82b8c743bcbbefb6f25defd4cc132c25c348
This simplifies the logic in the layout_thread and makes it clearer
which types of reflows generate display lists and cause display updates.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they shouldn't change behavior.
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 65d9b345bb2a588f41b0d6cdca1aaca2c3c69205
The elephant 🐘 (not PHP's) still remains in the room: `Rc<Promise>` shouldn't require `#[allow(unrooted_must_root)]`.
Source-Repo: https://github.com/servo/servo
Source-Revision: 4af0d9acb3f5724cac9f40a46ee03ab364a053bc
<!-- Please describe your changes on the following line: -->
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#18371.
<!-- Either: -->
- [X] There are tests for these changes
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
r? @emilio
Source-Repo: https://github.com/servo/servo
Source-Revision: 85167c8b7d2fb0e0e90283db750b601d789cd6ea
<!-- Please describe your changes on the following line: -->
change function signature to get type name via intrinsics
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#18354 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because stated in the PR that it was not required
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 887b011288f832634eed634769b5d2ec48f0e24d
<!-- Please describe your changes on the following line: -->
Automatically verify that derive() lists are alphabetically ordered #18172
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#18172 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 474369618965569407d127b1e8c481e757cc59d3
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 5c9ba6e631106ba96c912525e344affa3522af84
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: a087fee4b4daa76c7e1677b0adae512fb6c87d04
Some properties only accept non-negative values, or values greater than or equal to one. It is possible to produce an negative interpolated values while using negative timing functions, so we have to apply a restriction to these values to avoid getting invalid values.
For example, line-height must be non-negative, but the output progress of some timing functions (e,g. cubic-bezier(0.25, -2, 0.75, 1)) may be a negative value, so the interpolated result of line-height is also negative.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix Bug 1374233.
- [X] These changes do not require tests because we have tests in Gecko side already.
Source-Repo: https://github.com/servo/servo
Source-Revision: 016ea11cbaf7586db144be122581c5b110649aee
The `stylearc` alias is left there temporarilly and will be removed completely in a later commit/PR where also `components/style/gecko/generated/structs_{debug|release}.rs` are re-generated (they still use the old alias).
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#17768 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because no new features / only refactoring
Source-Repo: https://github.com/servo/servo
Source-Revision: 31228c18499d1c7f68b6b64b559354c768e81215
<!-- Please describe your changes on the following line: -->
Initial work for implementing custom element reactions: https://html.spec.whatwg.org/multipage/custom-elements.html#custom-element-reactions
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#17433 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7b134440fc736450cc87470a78e94f80b9161679
<!-- Please describe your changes on the following line: -->
This implements the CE-related steps when creating elements. `is` is now support by `document.createElement` and is stored on `Element`s. Only synchronously created autonomous elements are supported as async element creation and customized built-in elements both require custom element upgrade reactions.
Spec: https://dom.spec.whatwg.org/#concept-create-element
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#17191 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: bc3ec0ce1bc0ea55ac60def8b3e75948c7085162
* scrollLeft/scrollTop returned values of parent or even document root
Only the scroll of the node itself is returned. Otherwise 0.0.
* Scrolling via script had set viewport.
This resulted in other nodes appearing scrolled.
Now scroll_offsets are updated with correct node id.
These bugs caused other odd behavior like both body and
document.documentElement being scrolled or the view for scrolled
elements jumping.
Also try scrolling this [example page](https://pyfisch.org/stuff/scrolltest.html) in servo with and without this change.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#17342 (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes (partially)
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 626c029623fea999fd7ea8650a6df8859ac87fcd
Reviewed by bholley and emilo on the bugzilla bug.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix [Bug 1355724](https://bugzilla.mozilla.org/show_bug.cgi?id=1355724)
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: ddfe8b0468dcd57cc5f98cca5c5ba31134c04719
This requires https://github.com/servo/rust-cssparser/pull/143 for the final commit. There's no better way to split that work up, unfortunately, and it's extremely easy to bitrot. I would appreciate if we could expedite reviewing this work.
This is the work necessary to enable https://bugzilla.mozilla.org/show_bug.cgi?id=1352669. It makes sense to merge it separately because it's so much effort to keep it up to date with the ongoing Stylo work.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [x] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: 061cb5f48e5c93a5decf39e530aea4a566e97341
