Fixes warnings from rust-lang/rust#44229 when `--enable-commonmark` is passed to rustdoc.
This is mostly a global find-and-replace for bare URIs on lines by themselves in doc comments.
---
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes do not require tests because they are doc formatting changes only
Source-Repo: https://github.com/servo/servo
Source-Revision: 0e62a5829b7c29ae2667a21a439aff1e89201bf3
http://www.robohornet.org gives a score of 101.36 on master, and 102.68 with this PR. The latter is slightly better, but probably within noise level. So it looks like this PR does not affect DOM performance.
This is expected since `Box::new` is defined as:
```rust
impl<T> Box<T> {
#[inline(always)]
pub fn new(x: T) -> Box<T> {
box x
}
}
```
With inlining, it should compile to the same as box syntax.
Source-Repo: https://github.com/servo/servo
Source-Revision: a9022be0c3e30249845ca5947ac0c0a6743c7991
…so with proper alignment.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [X] These changes fix#16486 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 195100f3cac99b979e25157eb437e63bd3262e6f
The other failure is a legitimate WPT bug, will fix upstream.
Source-Repo: https://github.com/servo/servo
Source-Revision: 638e1dc40bc70c3c0d9cd2efdaef852fdb371382
<!-- Please describe your changes on the following line: -->
1. Implement stubs for structured clone callbacks.
2. Support Blob cloning.
Partial implementation of https://developer.mozilla.org/en-US/docs/Web/API/Web_Workers_API/Structured_clone_algorithm
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix#15021 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7be9f0e7c4f16c5626180c3a6b07abdecea408fe
<!-- Please describe your changes on the following line: -->
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#15660
<!-- Either: -->
- [x] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 1b1fadb8b88eefe878617230a7b78c75a164332d
Globals in that PR are now represented by the fake IDL interface `GlobalScope`.
Source-Repo: https://github.com/servo/servo
Source-Revision: a6e4b5bb86ad707a0863acff87344ca4239cfd2c
<!-- Please describe your changes on the following line: -->
The code was refactored to follow Rust naming conventions better.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes help fix#12379.
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because logic was not changed.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 5457b80233f9ce6773711c7189230d9a0a63d93a
r? @Manishearth
---
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
Source-Repo: https://github.com/servo/servo
Source-Revision: 43d4a459c0080215de10f43ea74b7860fb196009
r? @Manishearth
---
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
Source-Repo: https://github.com/servo/servo
Source-Revision: f4f212fd18290eab51eaac972335cec60d2a34e0
r? @Manishearth
---
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
Source-Repo: https://github.com/servo/servo
Source-Revision: 2eb03287388346517344b90c7d6da09d54da2596
Fixes#12589.
r? @Manishearth
---
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#12589
- [x] There are tests for these changes OR
Source-Repo: https://github.com/servo/servo
Source-Revision: b2f69f363574d5dea3cb96d4ef00c1d4e56bdd63
Revise several intricate parts of FileAPI's internal refcounting-related implementation.
Goal: Get it done right once and for all.
r? @Manishearth
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes do not require tests because it is internal logic change
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 93b130f3f7571ebb7407e3914d83dc6fc526c7d4
+ Introduce a `ReadFileProgress` sender in the `ReadFile` msg to file manager, and implement the related I/O operations
+ Change `tests/unit/net/test.jpeg` from a 4.8K file to a 39K file to better test the chunked reading (Since one chunk is maximally 8129 Bytes).
r? @Manishearth
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b41bf4f1f30b8f4eec92909c8971bc02d5422b50
r? @Manishearth
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [x] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 9c0e7b1cf2696ac214fcb0ce20f95ae9f16f2ea1
Use a final construction guard over type-string format; and other minor related cleanups
r? @Manishearth
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: fa432a5a34866356c4431f18b0790be4cfd2fb3f
This PR connects the resource requests with file manager thread, including:
+ `script_thread` load request
+ `image_cache_thread` load request
+ XHR load request (the responding part code yet not implemented due to unfamiliarity with fetch standard, but the infra is here)
One notable change is the introduction of "long-live validity", to handle the case specified in WPT test FileAPI/blob/Blob-XHR-revoke.html.
r? @Manishearth
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#10539
- [x] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 0e5893dc0d66faaca1c16101aa1f04a6cfb0b9c1
Most are simple refactoring, cleanups and improvements, but still involving two slightly notable changes:
+ In `filemanager`, now we read the file content based on requested `RelativePos` by `seek` and `read_exact` (rather than `read_to_end` then do slicing). This strategy might be again adjusted in future performance tuning but certainly better than nothing.
+ Also, I cached more file meta-info in both sides and left a block of comment on `filemanager`'s file reading mentioning the snapshot-state problem (not solved now though).
r? @Manishearth
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 665559556f5aeac5820e17684b14311aa3767c0c
r? @Manishearth
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 42e90f7db9d5ee7c6176e35e600cd27fe9c6748c
r? @Manishearth
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#12249
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 87c77725279ba3f1b612e27fccf353c81eae17b8
Basically three major changes:
1. More complete origin check in `FileManagerThreadMsg`
2. Add reference counting logic to file manage store and script API
3. Integrate the support of slicing
r? @Manishearth
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 36974f0746261b971c93ed7dfb9bd726675ccf69
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#11762.
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because no logic changes, only interface changes.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 9208b8e21493b4a7721ff780691ffec193ef8a32
First there is a more completed unit test. And in the test running, I found a runtime error `Serde(Custom("bincode does not support Deserializer::deserialize))` when reading response from file manage thread. I analyzed a bit and found that it is probably caused by the `Uuid` field. I temporarily work around it by making the `Id` essentially a string wrapped inside `SelectedFileId`.
Related to PR #11131.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [x] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 6f9016cf3edce828bf0edb5411b963d7c9f2d209
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy --faster` does not report any errors
- [x] These changes fix#10851, related to #11131
- [x] These changes do not require tests because the implementation is partial and can't work alone
1. Add new backend to `Blob` and a `BlobImpl` struct to abstract multiple backends
2. Rewrite most interfaces of `Blob` to accommodate the change
3. Change the `read` behaviour of `FileReader`, considering the case when blob is file-backed and not cached
The design is still immature, welcome comments!
- [x] I used `DOMRefCell` to cache the bytes in `BlobImpl`, is it sound?
- [x] The interfaces (like `BlobImpl::get_bytes`) handle requests in a default-to-empty way when the inner `DataSlice` is not cached. It might be possible to handle this condition better.
Source-Repo: https://github.com/servo/servo
Source-Revision: 3d7b17681dc9c20358fda9efc72575feb968cc81
This automates something that I find myself frequently commenting on in PRs.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 3ec20d9cf517c67f4d280e8958cc58c4c2b4fbb2
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#11185
- [X] These changes do not require tests because it only removes dead code.
----
This fixes#11185.
Source-Repo: https://github.com/servo/servo
Source-Revision: 2c674d0397927ef6563feb70e54f46815af55600
* Rewrite constructors of `Blob` and `File` with `DataSlice` as argument
* Update WebIDL of `Blob` and `File`
* Implement missing interfaces of `File` (However, due to lack of working `ArrayBuffer/ArrayBufferView` in `Blob`, so it still differs from spec)
* Update WPT test `File-constructor.html`
Source-Repo: https://github.com/servo/servo
Source-Revision: 392135bd0c2f512a0d632a7d76e667bc9af8f4a7
Apologize for the late PR. I see that #9977 already overlaps with some of the work. If that is accepted, then I'll change my PR to reflect just the WPT changes.
Source-Repo: https://github.com/servo/servo
Source-Revision: f3abfeeadd5c5b00b17e48c186e957ba10b6e33b
The links in components/script/dom/blob.rs were pointing to the old location.
Fixes#9157.
Source-Repo: https://github.com/servo/servo
Source-Revision: 8b855e44568ea4482df57118b662ade013e41e6c
This patch makes DOMString an opaque wrapper round String (currently it's a transparent wrapper).
The changes are:
* Replacing DOMString(foo) by DOMString::from(foo).
* Replacing foo.0 by String::from(foo).
* Adding functions clear, push_str and extend for in-place mutation of DOMStrings.
* Replacing DOMString by String in other threads (devtools, storage and filereader).
* Making DOMString implement !Send.
* Removing the pub attribute from the contents of DOMString.
This enables experimenting with other string representations in the DOM.
Source-Repo: https://github.com/servo/servo
Source-Revision: 62acdd303b78951885c2c90747b31f318907d6c9
I'm working on resolving https://github.com/servo/servo/issues/8213 as per the spec online and feedback in the servo channel. Note that currently I cannot build (and thus test) my code, so this is a bit of a rough first draft. I'd still like feedback on my progress, and I hope that there is another way for my code to be tested.
Source-Repo: https://github.com/servo/servo
Source-Revision: 021f441d24893861d45fec0cef7ed88dc9e6543a
This frees us forever from caring about maintaining these enums. The last commit removes their use from the initialisation of interface objects derived from Node.
Source-Repo: https://github.com/servo/servo
Source-Revision: 32daa17d5cbcad02db0713e21e52410cdc60480e
