This trades quite a bit of complicated code in Servo for few more
messages and a significant performance improvement. In particular,
WebRender can search the entire display list at once instead of
ping-ponging down the pipeline tree. This allows us to send mouse
events to the correct pipeline immediately.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they should not change behavior.
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: ca08271345f78fa881c174545f5b69a8ccb78143
Fixes warnings from rust-lang/rust#44229 when `--enable-commonmark` is passed to rustdoc.
This is mostly a global find-and-replace for bare URIs on lines by themselves in doc comments.
---
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes do not require tests because they are doc formatting changes only
Source-Repo: https://github.com/servo/servo
Source-Revision: 0e62a5829b7c29ae2667a21a439aff1e89201bf3
These are the inter-dependent patches of bug 1392161. We want to handle
extreme small lengths carefully for some properties, such as transform, so we
shouldn't use |Au| as the computed value of specified::Length. Now, we introduce
a new type, CSSPixelLength, which is a wrapper of CSSFloat, and it is the
computed value of specified::Length, so we can keep the fractional part
of computed::Length.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix [Bug 1392161](https://bugzilla.mozilla.org/show_bug.cgi?id=1392161).
- [X] These changes do not require tests because there is a wpt test for this, and I also add some others in Gecko.
Source-Repo: https://github.com/servo/servo
Source-Revision: ac1b49b1987d37b3c1ba67213b43c6d5fc373579
This leverages the position:sticky support in WebRender to bring basic
support for position:sticky in Servo. There are still some issues with
nested sticky flows as well as a few other corner cases. Tests are
imported from WPT and can be removed once we update to the latest
version.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: f1fab036ab16910587c3b0d7813c78b49562f6d9
Some properties only accept non-negative values, or values greater than or equal to one. It is possible to produce an negative interpolated values while using negative timing functions, so we have to apply a restriction to these values to avoid getting invalid values.
For example, line-height must be non-negative, but the output progress of some timing functions (e,g. cubic-bezier(0.25, -2, 0.75, 1)) may be a negative value, so the interpolated result of line-height is also negative.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix Bug 1374233.
- [X] These changes do not require tests because we have tests in Gecko side already.
Source-Repo: https://github.com/servo/servo
Source-Revision: 016ea11cbaf7586db144be122581c5b110649aee
- [x] `./mach build -d` does not report any errors (kinda, need webrender published and Cargo.toml fixed up)
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because it is a refactoring in which the difference is mostly a compile-time/strong-typing thing with no change to the logic.
Source-Repo: https://github.com/servo/servo
Source-Revision: 18653f69581693a5bae1ce4e350e78bc16159b08
Scroll roots are no longer nested containers holding items, so instead
we need to track the offsets of each, carefully handling fixed position
items and stacking contexts that create new reference frames.
Additionally, we remove the complexity of the pre-computed page scroll
offset, instead opting to send script scrolls to the layout task in
order to more quickly have a ScrollState there that matches the
script's idea of the scroll world.
Fixes#16405.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#16405.
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because it is currently impossible to test interactive scrolling with Servo's test infrastructure. Existing tests verify the script part though.
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: d855c929ef32e8f7d4bc15ba726e8eb5f8ad8e05
This ensures that we can pass a node address as part of the asynchronous
transition end notification, making it safe to fire the corresponding
DOM event on the node from the script thread. Without explicitly rooting
this node when the transition starts, we risk the node being GCed before
the transition is complete.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14972
- [X] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: fa251ec96b445b9ba8439d76e05870a88c2caa0f
This slims down SharedStyleContext, in preparation for a few things.
First, I would like to eventually move the stylist to the document in Servo, in
order for it to hold the StyleSheetSet.
Also, this gets rid of a fair amount of overhead while creating it in stylo.
Fixes bug 1363245.
Source-Repo: https://github.com/servo/servo
Source-Revision: eeb1ee9723777b0dc04e919556826eef628363fe
overflow:clip doesn't exist, it's just called clip internally. Renamed, and added the other missing values.
I also removed the overflow newtype -- no need for extra code bloat, and it's not protecting us from much.
Source-Repo: https://github.com/servo/servo
Source-Revision: cd8af862446ed8e4787d36d5de5d4dc254339a5e
Just use WebRender's ClipId directly. This will allow us to create and
use ReferenceFrames in the future, if we need to do that. It will also
make it easier to have Servo responsible for creating the root
scrolling area, which will allow removing some old hacks in the future.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they should not change behavior.
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 6e05a903afe81af5a45067dde4f9af26a2ea4be2
As [suggested](https://github.com/servo/servo/issues/15592#issuecomment-280379805) by @jdm `Document::nodes_from_point` now triggers a reflow.
I added a new reftest that panics with `ERROR:servo: Tried to hit test without a DisplayList` if this patch is not applied.
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#15592.
- [X] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: fa32d50c7a2fc9cb29c7245dc45a46ed68551601
The design of initiating network requests from the image cache thread was simple, but it makes it difficult to implement image loading that conforms to the HTML specification. These changes make the implementation of HTMLImageElement responsible for network requests for `<img>` elements, and CSS-based images (background-image, bullets, etc.) are requested by the script thread to ensure that the layout thread does not attempt to retain unsafe pointers to DOM nodes during asynchronous operations.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#7708
- [X] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: 854d720b21dda68034233a25385c4f2564a4a2d5
<!-- Please describe your changes on the following line: -->
According to https://github.com/servo/servo/pull/3069 the cached thread local context is introduced for green threads. Now green threads has gone, and the existence of cache force us to create a `LayoutContext`, an `AssignISizes` and an `AssignBSizes` for each flow during parallel layout, so the pull request tries to remove it. And it also switch `assign_inline_sizes()` to accept a `LayoutContext` parameter, as according to my current design we need to do full layout to some flex items for column flexbox during assign isize traversal.
Part of #14123.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because refactoring
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: e2b494b1d08b8929ca7e5ae369304f41af81ace2
<!-- Please describe your changes on the following line: -->
Offset parent queries, which are used in the getters for HTMLElement's `offsetParent`, `offsetTop`, `offsetLeft`, `offsetWidth`, and `offsetHeight`, are pretty busted. The most egregious bug is that, as reported in #12939, inline elements are treated as if they're not present in the document. This PR fixes that and all of the other bugs I could trace directly to the offset parent query code, but `offsetTop` and `offsetLeft` are still unreliable in certain circumstances for reasons I haven't looked into (#13708). Inline elements with no content are still treated as not present due to #13982, so #13944 isn't fixed with this PR, either.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#12939 and fix#12595
<!-- Either: -->
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b08d4a7d395e41a344085d4cf79801c62019c976
…to other stacking context space.
I don't know how neither review or a test caught this.
r? @pcwalton or @notriddle
Fixes#15015
Source-Repo: https://github.com/servo/servo
Source-Revision: a4551d0ceea8f2aceb68775452ea3010760f2825
<!-- Please describe your changes on the following line: -->
Implements cursor positioning in input elements (text/password) via mouse. The related issue is #10083 but is only covered partly.
This PR does **not** cover:
* positioning in textarea elements via mouse
* text selection in input/textarea elements via mouse
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix#10083 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because I can't think of a way to test mouse interaction in the current test pipeline.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 68a8e1bf2b57afe9bf6c4fb295bdc5dca099a9f6
See the discussion in https://bugzilla.mozilla.org/show_bug.cgi?id=1323372
@emilio Please review, but don't merge yet until we get the upstream changes into Rayon.
CC @SimonSapin @heycam @upsuper @Manishearth @pcwalton @nikomatsakis
Source-Repo: https://github.com/servo/servo
Source-Revision: 8fd8d6161426af386c0dfd3d13968a409474eb16
<!-- Please describe your changes on the following line: -->
* `LonghandId` and `ShorthandId` are C-like enums
* `Atom` is used for the name of custom properties.
* `PropertyDeclarationId` is the identifier for `PropertyDeclaration`,
after parsing and shorthand expansion. (Longhand or custom property.)
* `PropertyId` represents any CSS property, e.g. in CSSOM.
(Longhand, shorthand, or custom.)
CC @upsuper
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 6dd4b4822fa788694153ee61a04dd9a5dfb748ec
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13736, #10753 (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
This reimplemntation of the feature uses ScrollRootIds to scroll
particular scrollable areas of the page.
Fixes#13736.
Fixes#10753.
Source-Repo: https://github.com/servo/servo
Source-Revision: a0619688a638b322f17d2034e0309502af1a5e52
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 68b1d1d2860ac6c6e8c1c0dfe46af6790ca01dc8
<!-- Please describe your changes on the following line: -->
This will allow types to be generic over our local `ToCss`
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [x] These changes do not require tests because it's a refactor
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: f48b3fe2197a59b29bc711fb1b5496cbb97bd330
Previously, `string-cache` defined:
* An string-like `Atom` type,
* An `atom!("foo")` macro that expands to a value of that type, for a set of strings known at compile-time,
* A `struct Namespace(Atom);` type
* A `ns!(html)` macro that maps known prefixed to `Namespace` values with the corresponding namespace URL.
Adding a string to the static set required making a change to the `string-cache` crate.
With 0.3, the `Atom` type is now generic, with a type parameter that provides a set of static strings. We can have multiple such sets, defined in different crates. The `string_cache_codegen` crate, to be used in build scripts, generates code that defines such a set, a new atom type (a type alias for `Atom<_>` with the type parameter set), and an `atom!`-like macro.
The html5ever repository has a new `html5ever_atoms` crate that defines three such types: `Prefix`, `Namespace`, and `LocalName` (with respective `namespace_prefix!`, `namespace_url!`, and `local_name!` macros). It also defines the `ns!` macro like before.
This repository has a new `servo_atoms` crate in `components/atoms` that, for now, defines a single `Atom` type (and `atom!`) macro. (`servo_atoms::Atom` is defined as something like `type Atom = string_cache::Atom<ServoStaticStringSet>;`, so overall there’s now two types named `Atom`.)
In this PR, `servo_atoms::Atom` is used for everything else that was `string_cache::Atom` before. But more atom types can be defined as needed. Two reasons to do this are to auto-generate the set of static strings (I’m planning to do this for CSS property names, which is the motivation for this change), or to have the type system help us avoid mix up unrelated things (this is why we had a `Namespace` type ever before this change).
Introducing new types helped me find a bug: when creating a new attribute `dom::Element::set_style_attr`, would pass `Some(atom!("style"))` instead of `None` (now `Option<html5ever_atoms::Prefix>` instead of `Option<string_cache::Atom>`) to the `prefix` argument of `Attr::new`. I suppose the author of that code confused it with the `local_name` argument.
---
Note that Stylo is not affected by any of this. The `gecko_string_cache` module is unchanged, with a single `Atom` type. The `style` crate conditionally compiles `Prefix` and `LocalName` re-exports for that are both `gecko_string_cache::Atom` on stylo.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 5b4cc9568dbd5c15e5d2fbc62719172f11566ffa
The patch here hoists pseudo-element handling onto ThreadSafeLayoutElement. I have another patch which hoists stuff from TNode to TElement, but want to make sure this patch passes try first.
Source-Repo: https://github.com/servo/servo
Source-Revision: e7b5891d9ccdb551a536937391c019e20b3911a4
This is part of the new incremental restyle architecture work. I have patches to element-ify things more, but want to get this in the tree first.
Source-Repo: https://github.com/servo/servo
Source-Revision: 87ef5487179a5b4c556361ad0c77c798b1edd4e1
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because this PR should not change behavior.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Layers were a feature of the legacy drawing path. If we re-add them at
some point, it probably makes more sense to make them a product of
display list inspection.
This change also remove a bunch of dead painting code.
Source-Repo: https://github.com/servo/servo
Source-Revision: bb271ef4afea02b6b1b5d207e773d1fedccd2906
The new restyle architecture doesn't store these things in consistent places, so we need a more abstract API.
Source-Repo: https://github.com/servo/servo
Source-Revision: abcc4aeaf212fc5fc5f9e15e46feba11e3e9284f
The double indirection in `&mut FlowRef` is not useful.
Source-Repo: https://github.com/servo/servo
Source-Revision: d29f61af317d3ab9e8233f0327c25b4925b4f053
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [x] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
We got this wrong (I think it wasn't my fault actually), I was just writing a test for #12777 when I found this.
Source-Repo: https://github.com/servo/servo
Source-Revision: 4cefbcc94927a1c7cf12b188c4abbd63d7636e3d
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
r? @bholley
Source-Repo: https://github.com/servo/servo
Source-Revision: 1b2450339c40dbcb65e94a346ea434d45f0edf90
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#12763 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 9b4b94aa755a04d4b9c9703574b01c03ad25a788
Background:
The changes to Servo code to support Stylo began in the `selectors` crate with making pseudo-elements generic, defined be the user, so that different users (such as Servo and Gecko/Stylo) could have a different set of pseudo-elements supported and parsed. Adding a trait makes sense there since `selectors` is in its own repository and has others users (or at least [one](https://github.com/SimonSapin/kuchiki)).
Then we kind of kept going with the same pattern and added a bunch of traits in the `style` crate to make everything generic, allowing Servo and Gecko/Stylo to do things differently. But we’ve also added a `gecko` Cargo feature to do conditional compilation, at first to enable or disable some CSS properties and values in the Mako templates. Since we’re doing conditional compilation anyway, it’s often easier and simpler to do it more (with `#[cfg(feature = "gecko")]` and `#[cfg(feature = "servo")]`) that to keep adding traits and making everything generic. When a type is generic, any method that we want to call on it needs to be part of some trait.
----
The first several commits move some code around, mostly from `geckolib` to `style` (with `#[cfg(feature = "gecko")]`) but otherwise don’t change much.
The following commits remove some traits and many type parameters through the `style` crate, replacing them with pairs of conditionally-compiled API-compatible items (types, methods, …).
Simplifying code is nice to make it more maintainable, but this is motivated by another change described in https://github.com/servo/servo/pull/12391#issuecomment-232183942. (Porting Servo for that change proved difficult because some code in the `style` crate was becoming generic over `String` vs `Atom`, and this PR will help make that concrete. That change, in turn, is motivated by removing geckolib’s `[replace]` override for string-cache, in order to enable using a single Cargo "workspace" in this repository.)
r? @bholley
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require new tests because refactoring
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 2d01d41a506bcbc7f26a2284b9f42390d6ef96ab
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#11689 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because just renaming
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b5115fc895bb40bce52d39de65a07160935b15fd
This automates something that I find myself frequently commenting on in PRs.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 3ec20d9cf517c67f4d280e8958cc58c4c2b4fbb2
Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data:
- [X ] `./mach build -d` does not report any errors
- [X ] `./mach test-tidy --faster` does not report any errors
- [X ] These changes fix#11320 (github issue number if applicable).
Either:
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process.
Source-Repo: https://github.com/servo/servo
Source-Revision: 2f9796fa696e9514280777398467696dd4f004b3
