We need to hang both snapshots and restyle damage off of ElementData, and so we need them to be concrete to avoid infecting ElementData with the trait hierarchy.
Source-Repo: https://github.com/servo/servo
Source-Revision: d8ac5100e81ccbad4b5131688b96bedb9b5e279d
This pull request contains commit implementing initial steps for Improving Network Security project. As part of initial steps referer policy enums for strict-origin and strict-origin-when-cross-origin have been added to [hyper](https://github.com/hyperium/hyper/pull/943). Unit tests and additional logic has been added to handle these policies. Since enum changes are available on hyper version 0.9.11. We had to update hyper version to 0.9.11.
Hyper 0.9.11 depends on num_cpus 1.1.0. To avoid different version of num_cpus. We have updated rayon version from 0.4.0 to 0.4.3. Cargo.toml of util, style, geckolib, stylo component has been updated to use num_cpus version 1.1.0 instead of 0.2.2.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ X] `./mach build -d` does not report any errors
- [ X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
…igin
Referer policy strict-origin and strict-origin-when-cross-origin changes have been implemented. Relevant unit test cases have been added. Enum for RefererPolicy has been added to hyper codebase and v 0.9.11 of hyper contains these changes.
This commit also contains changes related to upgrade of hyper from v0.9.10 to v0.9.11. Other dependencies changed are rayon, utils, num_cpus.
Source-Repo: https://github.com/servo/servo
Source-Revision: dd34b2a3355dc7fa23d118888359d70f8b445db8
<!-- Please describe your changes on the following line: -->
Improved implementation of getElementsByTagName() in Document, properly pass 3 cases of https://dom.spec.whatwg.org/#concept-getelementsbytagname
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix #11596 (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: cfef68f92d1c8cdc928d3c0b60f22de4b40a97be
<!-- Please describe your changes on the following line: -->
Lookup iframes by `FrameId` rather than `PipelineId`. This should make lookup much more reliable, since the frame id doesn't change.
cc @ConnorGBrewster @aneeshusa
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes do not require tests because refactoring
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: ce725c9475b9fb97a8559b29c1e7a080633cd002
Previously, `string-cache` defined:
* An string-like `Atom` type,
* An `atom!("foo")` macro that expands to a value of that type, for a set of strings known at compile-time,
* A `struct Namespace(Atom);` type
* A `ns!(html)` macro that maps known prefixed to `Namespace` values with the corresponding namespace URL.
Adding a string to the static set required making a change to the `string-cache` crate.
With 0.3, the `Atom` type is now generic, with a type parameter that provides a set of static strings. We can have multiple such sets, defined in different crates. The `string_cache_codegen` crate, to be used in build scripts, generates code that defines such a set, a new atom type (a type alias for `Atom<_>` with the type parameter set), and an `atom!`-like macro.
The html5ever repository has a new `html5ever_atoms` crate that defines three such types: `Prefix`, `Namespace`, and `LocalName` (with respective `namespace_prefix!`, `namespace_url!`, and `local_name!` macros). It also defines the `ns!` macro like before.
This repository has a new `servo_atoms` crate in `components/atoms` that, for now, defines a single `Atom` type (and `atom!`) macro. (`servo_atoms::Atom` is defined as something like `type Atom = string_cache::Atom<ServoStaticStringSet>;`, so overall there’s now two types named `Atom`.)
In this PR, `servo_atoms::Atom` is used for everything else that was `string_cache::Atom` before. But more atom types can be defined as needed. Two reasons to do this are to auto-generate the set of static strings (I’m planning to do this for CSS property names, which is the motivation for this change), or to have the type system help us avoid mix up unrelated things (this is why we had a `Namespace` type ever before this change).
Introducing new types helped me find a bug: when creating a new attribute `dom::Element::set_style_attr`, would pass `Some(atom!("style"))` instead of `None` (now `Option<html5ever_atoms::Prefix>` instead of `Option<string_cache::Atom>`) to the `prefix` argument of `Attr::new`. I suppose the author of that code confused it with the `local_name` argument.
---
Note that Stylo is not affected by any of this. The `gecko_string_cache` module is unchanged, with a single `Atom` type. The `style` crate conditionally compiles `Prefix` and `LocalName` re-exports for that are both `gecko_string_cache::Atom` on stylo.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 5b4cc9568dbd5c15e5d2fbc62719172f11566ffa
Instead of letting the compositor try to find the correct scroll
layer for a touch event, switch touch events to work the same way
that mouse events do.
Touch events are now dispatched to the root pipeline, and then
forwarded to child iframes as required.
Source-Repo: https://github.com/servo/servo
Source-Revision: 9d3fc76463cb226ffeb9a6aca7239bbe36543802
Globals in that PR are now represented by the fake IDL interface `GlobalScope`.
Source-Repo: https://github.com/servo/servo
Source-Revision: a6e4b5bb86ad707a0863acff87344ca4239cfd2c
<!-- Please describe your changes on the following line: -->
As discussed in https://bugzilla.mozilla.org/show_bug.cgi?id=1305141Closes#13176
---
Original PR title: Stop relying on `impl<T: HeapSizeOf> HeapSizeOf for Arc<T>`
https://github.com/servo/heapsize/issues/37#issuecomment-249861171
This builds on top of that.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because refactor
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: aea9545e16fd6ea4a6b1234d1b969457313a5fa7
Fixes#13196
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#13196.
- [X] These changes do not require tests because the functionality hasn't changed
Source-Repo: https://github.com/servo/servo
Source-Revision: 9b7708063aec5dbabc96cd93e16028e0ee6e14cd
According to https://w3c.github.io/webappsec-referrer-policy/#referrer-policy-delivery, there's `<a>`, `<link>` and `<area>` could apply this delivery method. This PR contains changes for `<a>` and `<link>` **but** not `<area>`, since HTMLAreaElement is barely implemented.
We should file another issue for it.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#11862
- [X] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: 8a78e75d4314aa5ac770ec070a6ea7eed341e3ec
<!-- Please describe your changes on the following line: -->
The code was refactored to follow Rust naming conventions better.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes help fix#12379.
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because logic was not changed.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 5457b80233f9ce6773711c7189230d9a0a63d93a
<!-- Please describe your changes on the following line: -->
SubpageId was originally introduced in 2013 to help iframes keep track of
their associated (children) pipelines. However, since each pipeline
already has a PipelineId, and those are unique, those are sufficient
to keep track of children.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#11694 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because refactoring
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 161e0741cd4942d337b8d0fca2e0eaa86482ad9a
<!-- Please describe your changes on the following line: -->
* Add field to document struct to store information about last 'click' event
* Add code to `handle_mouse_event` function to detect and fire double click events
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ X] `./mach build -d` does not report any errors
- [X ] `./mach test-tidy` does not report any errors
- [X ] These changes fix#12767 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X ] These changes do not require tests because it is input related
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 67bfd0df4b11c5f81a6cc6041bfbc8317cd03d42
<!-- Please describe your changes on the following line: -->
`DOMRefCell` usage is not there year because of thread-safety questions, but I have this much already that I’d like to land before it bitrots.
r? @emilio
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require new tests because refactor
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: bbfe38e35f3f6a51009c0411647c89c8b5616357
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13131
<!-- Either: -->
- [x] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
r? @pcwalton
Source-Repo: https://github.com/servo/servo
Source-Revision: acb47007ba9494c73272494efe9ebd2c05e4c014
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [x] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
We got this wrong (I think it wasn't my fault actually), I was just writing a test for #12777 when I found this.
Source-Repo: https://github.com/servo/servo
Source-Revision: 4cefbcc94927a1c7cf12b188c4abbd63d7636e3d
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#12763 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 9b4b94aa755a04d4b9c9703574b01c03ad25a788
Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data:
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
Either:
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process.
Source-Repo: https://github.com/servo/servo
Source-Revision: 504954890e406b6e735fb17caa8e3454b17b8208
<!-- Please describe your changes on the following line: -->
Add the target pseudo selector and set/unset it during scrolling to fragment. This change is not complete as no repaint is triggered after the selector is added - it will only take effect after a repaint is triggered by e.g. hovering over another element. (See manual test)
I would like some help because i'm not sure how to resolve this; I can only think to call window.reflow.
I added a manual test case, don't think this counts really! I think the applicable automated test is in /tests/wpt/web-platform-tests/dom/nodes/Element-matches.html but it currently fails, I think due to the above.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#7720 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7a7bdf51adc3c5051f93c8044797c8fcaf89953c
This commit adds hooks to the Servo style traversal to avoid traversing all the
DOM for every restyle. Additionally it changes the behavior of the dirty flag to
be propagated top down, to prevent extra overhead when an element is dirtied.
This commit doesn't aim to change the behavior on Servo just yet, since Servo does extra job when dirtying the node related with DOM revision counters that might be necessary.
CC @asajeffrey for the DOM revision counters stuff. When a node is dirty, do all its descendants really need to increment the revision counter, or is this an unintended effect? My intuition is that this is hurting performance quite a lot for servo.
r? @bholley
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [x] These changes do not require tests because no geckolib tests yet.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 944d371b8f0e72f6aa5465be38c0c8daeab66127
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [x] These changes do not require tests because refactoring.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
This is a rewrite for how style interfaces with its consumers in order to allow
different representations for an element snapshot.
This also changes the requirements of an element snapshot, requiring them to
only implement MatchAttr, instead of MatchAttrGeneric. This is important for
stylo since implementing MatchAttrGeneric is way more difficult for us given the
atom limitations. This also allows for more performant implementations in the
Gecko side of things.
I don't want to get this merged just yet, mainly because the stylo part is not
implemented, but I'd like early feedback from @bholley and/or @heycam: How do
you see this approach? I don't think we'll have much problem to implement
MatchAttr for our element snapshots, but... worth checking.
r? @heycam
Source-Repo: https://github.com/servo/servo
Source-Revision: 1e0321f7dde5f33f7d26bbd4f088622fa3660477
<!-- Please describe your changes on the following line: -->
Allow mozbrowser events, in particular mozbrowsererror events, to target a window. Needed for https://github.com/browserhtml/browserhtml/issues/1182
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#12420
- [X] These changes do not require tests because we're not testing our issue reporting system, which this is intended for.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b6c0ed9a44b076928ea816ca529702eec25d0029
Background:
The changes to Servo code to support Stylo began in the `selectors` crate with making pseudo-elements generic, defined be the user, so that different users (such as Servo and Gecko/Stylo) could have a different set of pseudo-elements supported and parsed. Adding a trait makes sense there since `selectors` is in its own repository and has others users (or at least [one](https://github.com/SimonSapin/kuchiki)).
Then we kind of kept going with the same pattern and added a bunch of traits in the `style` crate to make everything generic, allowing Servo and Gecko/Stylo to do things differently. But we’ve also added a `gecko` Cargo feature to do conditional compilation, at first to enable or disable some CSS properties and values in the Mako templates. Since we’re doing conditional compilation anyway, it’s often easier and simpler to do it more (with `#[cfg(feature = "gecko")]` and `#[cfg(feature = "servo")]`) that to keep adding traits and making everything generic. When a type is generic, any method that we want to call on it needs to be part of some trait.
----
The first several commits move some code around, mostly from `geckolib` to `style` (with `#[cfg(feature = "gecko")]`) but otherwise don’t change much.
The following commits remove some traits and many type parameters through the `style` crate, replacing them with pairs of conditionally-compiled API-compatible items (types, methods, …).
Simplifying code is nice to make it more maintainable, but this is motivated by another change described in https://github.com/servo/servo/pull/12391#issuecomment-232183942. (Porting Servo for that change proved difficult because some code in the `style` crate was becoming generic over `String` vs `Atom`, and this PR will help make that concrete. That change, in turn, is motivated by removing geckolib’s `[replace]` override for string-cache, in order to enable using a single Cargo "workspace" in this repository.)
r? @bholley
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require new tests because refactoring
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 2d01d41a506bcbc7f26a2284b9f42390d6ef96ab
Adds a new `Option<ReferrerPolicy>` field to Document and sets it appropriately in `ScriptThread::load` if a Referrer-Policy header is present.
r? @jdm
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#11860
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b382cc2103180f7dfd8df9c34970a95ed57a2d88
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#12389 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 4b78b9adab916cc4fdde6248e785030b79f406da
<!-- Please describe your changes on the following line: -->
This makes it so each task is a thin wrapper over a runnable and whenever a task is queued, it is automatically wrapped by the window's `runnable_wrapper`.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix #11703 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 3011d4b450b107f87fab54f6c59245ac1478fa79
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#11384
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 37dbb502089a4b05eaaa53764a7f37cfe19523c9
<!-- Please describe your changes on the following line: -->
Added toggling of active state for element and parents on mousedown/mouseup. Active state is removed when mouseout. (hover)
- As with my other PR i'm struggling a bit with the automated testing. I've added a manual test case and found quirks-mode/active-and-hover-manual.html which - aside from also being a manual test, is functional in Firefox but does not render correctly in Servo.
- Not implemented: In Firefox, behaviour differs with a <!DOCTYPE HTML> and an anchor does not lose it's activation on mouseout; whereas a button does.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#8719 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 5afdf7fb5c9a4c997a287f6d61ec05857f073ce2
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#12335
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because it's stated so in issue description.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 2d9d47315f7ecef73f8437ca196e95aa33ce0c05
Using the ReceivedCharacter event from glutin, we can obtain the actual key characters that the user is pressing and releasing. This gets passed to the script thread along with the physical key data, since KeyboardEvent needs both pieces of information, where they get merged into a single logical key that gets processed by clients like TextInput without any special changes.
Tested by switching my macbook keyboard to dvorak and looking at the output of keypress/keyup/keydown event listeners, as well as playing with tests/html/textarea.html. Non-content keybindings like reload work as expected, too - the remapped keybinding triggers the reload action.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#4144
- [X] These changes do not require tests because I can't think of a way to test remapped keyboard input
Fixes #11991.
Source-Repo: https://github.com/servo/servo
Source-Revision: 68fb9ebc413f9cfc1ad4ca578d904c164836db74
The existing `Rooted` and `RootedVec` users were migrated the the following two macros:
```rust
let x = Rooted::new(cx, value);
// Was changed to:
rooted!(in(cx) let x = value);
// Which expands to:
let mut __root = Rooted::new_unrooted(value);
let x = RootedGuard::new(cx, &mut __root);
```
```rust
let mut v = RootedVec::new();
v.extend(iterator);
// Was changed to:
rooted_vec!(let v <- iterator);
// Which expands to:
let mut __root = RootableVec::new();
let v = RootedVec::new(&mut __root, iterator);
```
The `rooted!` macro depends on servo/rust-mozjs#272.
These APIs based on two types, a container to be rooted and a rooting guard, allow implementing both `Rooted`-style rooting and `Traceable`-based rooting in stable Rust, without abusing `return_address`.
Such macros may have been tried before, but in 1.9 their hygiene is broken, they work only since 1.10.
Sadly, `Rooted` is a FFI type and completely exposed, so I cannot prevent anyone from creating their own, although all fields but the value get overwritten by `RootedGuard::new` anyway.
`RootableVec` OTOH is *guaranteed* to be empty when not rooted, which makes it harmless AFAICT.
By fixing rust-lang/rust#34227, this PR enables Servo to build with `-Zorbit`.
---
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fixrust-lang/rust#34227
- [x] These changes do not require tests because they are not functional changes
Source-Repo: https://github.com/servo/servo
Source-Revision: 80cb0cf8214fd52d2884724614c40cb278ee7575
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b0a8ce5341f5148e36523fee0b0fcbc2684c0a68
Add the webdriver commands for GetCookie and AddCookie. In addition the basic messages for sending cookie data back and forth from the resource thread needed to be created and the handlers for those messages were created as well.
Do we plan to have some sort of test suite for the webdriver at some point? At this point I primarily test my PRs with basic shell scripts with a lot of `curl` and `jq`.
Source-Repo: https://github.com/servo/servo
Source-Revision: 054bb381e94b82fad4e502bc0f3229f39195c713
<!-- Please describe your changes on the following line: -->
Added check in `HTMLElement.Focus` to avoid requesting focus when the element already has it.
Added check in `Document.commit_focus_transaction` to avoid sending `blur` and `focus` events when clicking on an already focused element.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#11651
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
Source-Repo: https://github.com/servo/servo
Source-Revision: 7d978e7b3d6b41b234f7c9b4051b746a1fbeddee
<!-- Please describe your changes on the following line: -->
Got `window.top` and `window.parent` to return the right result inside a `mozbrowser` iframe.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 280bfc961a013bec58ba23d756db002b3e44fdef
