… rather than the start location of the current construct. This likely places the error just *after* of the unexpected token whereas before would be best, but that’s likely a much bigger change.
See https://bugzilla.mozilla.org/show_bug.cgi?id=1378861
Source-Repo: https://github.com/servo/servo
Source-Revision: c79a54dbd9d3a590f5fd8191b8e57a0b9d1d0fdb
This patch replaces the handwritten MallocSizeOf implementation for
PropertyDeclaration with a derived one, which gives much more thorough
measurement.
This requires (a) deriving MallocSizeOf for a *lot* of additional types (most
of which already have `derive(HeapSizeOf)` in Servo builds), and (b)
implementing MallocSizeOf for a few more types in the `malloc_size_of` crate.
These changes would significantly improve the reporting coverage for gmail if
it weren't for the fact that SpecifiedUrl isn't measured due to a lack of
clarity about its fields; that can be fixed as a follow-up once bug 1397971 has
landed.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because testing is on the Gecko side.
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 097cea240fe9b1d96fa4ef5ffa984f09e0bd04f3
I want to play with autogenerating style structs, and color is the smallest
struct out there.
However, moving it out of the mako file is a requirement. This patch does that.
Source-Repo: https://github.com/servo/servo
Source-Revision: bcddb19eb8642664386ed83d7734f16db517d0cf
<!-- Please describe your changes on the following line: -->
Automatically verify that derive() lists are alphabetically ordered #18172
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#18172 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 474369618965569407d127b1e8c481e757cc59d3
<!-- Please describe your changes on the following line: -->
Use the new `ComputedUrl` type for computed types and `SpecifiedUrl` for specified types instead of using the `SpecifiedUrl` implementation for both.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#17625 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because this is an implementation change and tests already exist.
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 8a48578a2601769d61ab6f8429e7b1ecb19cbb84
<!-- Please describe your changes on the following line: -->
The tests in the issue worked for me locally.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [ ] `./mach test-tidy` does not report any errors
- [X] These changes fix#18001 (github issue number if applicable).
<!-- Either: -->
- [X] These changes do not require tests because they are just refactoring
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 955b62506042a330b7602a48d1d8899b0b6ae4af
Some properties only accept non-negative values, or values greater than or equal to one. It is possible to produce an negative interpolated values while using negative timing functions, so we have to apply a restriction to these values to avoid getting invalid values.
For example, line-height must be non-negative, but the output progress of some timing functions (e,g. cubic-bezier(0.25, -2, 0.75, 1)) may be a negative value, so the interpolated result of line-height is also negative.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix Bug 1374233.
- [X] These changes do not require tests because we have tests in Gecko side already.
Source-Repo: https://github.com/servo/servo
Source-Revision: 016ea11cbaf7586db144be122581c5b110649aee
It was storing both TrackSize and TrackRepeat before and TrackRepeat have to be
converted into sequence of TrackSize during serialization. Instead of doing this
in serialization process(which is hard and hacky), we converted to do this in
parsing process. We were doing this conversion in the ComputedValue conversion.
So we only had to move this process to parsing.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
Source-Repo: https://github.com/servo/servo
Source-Revision: 124a23b207d645d994eddc27efd409c22dc0aa28
This covers the `subgrid <line-name-lists>?` for `grid-template` (for gecko, and hence, stylo).
Source-Repo: https://github.com/servo/servo
Source-Revision: 7a71035793f6d87c8f0f8e63ae045c1aaa40b617
<!-- Please describe your changes on the following line: -->
https://bugzilla.mozilla.org/show_bug.cgi?id=1369588
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes do not require tests because it's for stylo
Source-Repo: https://github.com/servo/servo
Source-Revision: d28324d9eb1dd484c322698d2acb64831637c7ee
This requires https://github.com/servo/rust-cssparser/pull/143 for the final commit. There's no better way to split that work up, unfortunately, and it's extremely easy to bitrot. I would appreciate if we could expedite reviewing this work.
This is the work necessary to enable https://bugzilla.mozilla.org/show_bug.cgi?id=1352669. It makes sense to merge it separately because it's so much effort to keep it up to date with the ongoing Stylo work.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [x] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: 061cb5f48e5c93a5decf39e530aea4a566e97341
<!-- Please describe your changes on the following line: -->
Make `text-shadow` reuse `Shadow` type directly.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because refactor
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 2df8f69bcf8917a8300c24f920f7677f1f40ae11
I plan to simplify it further, but this is worth landing on its own.
Source-Repo: https://github.com/servo/servo
Source-Revision: fa158a78b6f976156a93bcccae3fdd27046faf50
