… rather than the start location of the current construct. This likely places the error just *after* of the unexpected token whereas before would be best, but that’s likely a much bigger change.
See https://bugzilla.mozilla.org/show_bug.cgi?id=1378861
Source-Repo: https://github.com/servo/servo
Source-Revision: c79a54dbd9d3a590f5fd8191b8e57a0b9d1d0fdb
<!-- Please describe your changes on the following line: -->
Automatically verify that derive() lists are alphabetically ordered #18172
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#18172 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 474369618965569407d127b1e8c481e757cc59d3
These are the bugs I discovered while I was re-enabling the disabled grid mochitests. Now all grid mochitests are passing! Additionally I converted `Vec<CustomIdent>`'s into `Box<[CustomIdent]>`. We are storing so many line names in vectors. These should help a bit.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
Source-Repo: https://github.com/servo/servo
Source-Revision: 20a3b0236d20e621591e751646758e833526084b
It was storing both TrackSize and TrackRepeat before and TrackRepeat have to be
converted into sequence of TrackSize during serialization. Instead of doing this
in serialization process(which is hard and hacky), we converted to do this in
parsing process. We were doing this conversion in the ComputedValue conversion.
So we only had to move this process to parsing.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
Source-Repo: https://github.com/servo/servo
Source-Revision: 124a23b207d645d994eddc27efd409c22dc0aa28
This covers the `subgrid <line-name-lists>?` for `grid-template` (for gecko, and hence, stylo).
Source-Repo: https://github.com/servo/servo
Source-Revision: 7a71035793f6d87c8f0f8e63ae045c1aaa40b617
This requires https://github.com/servo/rust-cssparser/pull/143 for the final commit. There's no better way to split that work up, unfortunately, and it's extremely easy to bitrot. I would appreciate if we could expedite reviewing this work.
This is the work necessary to enable https://bugzilla.mozilla.org/show_bug.cgi?id=1352669. It makes sense to merge it separately because it's so much effort to keep it up to date with the ongoing Stylo work.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [x] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: 061cb5f48e5c93a5decf39e530aea4a566e97341
Fixes#16949.
- [x] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes do not require tests because it's just a refactor
Source-Repo: https://github.com/servo/servo
Source-Revision: 594479fe15f810d148e2352951affe905b1e13ff
This has the implementation of grid's `<track-list>` nightmare.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#15311
<!-- Either: -->
- [x] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 0b3fd8de767c6ad6ea2fd983c396f5c0a20becfc
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#15312 (github issue number if applicable).
<!-- Either: -->
- [x] These changes do not require tests because it's a stylo thing
r? @emilio (cc @Manishearth @upsuper)
Source-Repo: https://github.com/servo/servo
Source-Revision: 30a31fb744a2fd2b11b901d722704fe458df3022
<!-- Please describe your changes on the following line: -->
Box larger specified values to avoid memmove impact.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#15322 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 5c609213d68a17f65ae4e64c34d8dc6b66d35784
Style no forced docs for the properties code and similar, but I ran out of time, and I think it's a nice improvement.
I'd appreciate a fast-ish turn-around time because this is pretty much prone to bitrot.
Source-Repo: https://github.com/servo/servo
Source-Revision: bd67163438317daa711b2411ce302aaf5bf4136a
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build-geckolib` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [ ] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 71b68ea0dec10a8e71a9f080d7d7ff382d8f0127
