This is not a problem for regular Servo because these values are toggled when the command line is parsed. But it's not the case when embedding Servo.
Source-Repo: https://github.com/servo/servo
Source-Revision: 62930d0073fbf07362b02be0bd774986c8fb94e9
Fix a simple warning.
---
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
This change is obviously too trivial for tests.
Source-Repo: https://github.com/servo/servo
Source-Revision: 04fb310847c55ba70c27e7badcfb6b04c2e50d63
This commit adds an initial iOS User-Agent as discussed here : https://github.com/servo/servo/issues/18154#issuecomment-324382850
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes (continues to) fix#18154.
<!-- Either: -->
- [X] These changes do not require tests because too little is done
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: bde7135a3be80f8d8a4d15719394eddc97934392
<!-- Please describe your changes on the following line: -->
GitHub has started throwing warnings about using an outdated version of Firefox when loaded with Servo. I am assuming that this is due to Servo using Firefox 37.0 in its user agent which was set in 2015 and hasn't been updated since then. I don't know if updating this should cause any site compatibility issues or not.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [ ] `./mach build -d` does not report any errors
- [ ] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 1c4076a75993001eba1f467b1fe0576f62238c36
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
Source-Repo: https://github.com/servo/servo
Source-Revision: eba573d774dd2ac07ec8d62f1ad8deffca4667a4
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
This patch adds the command line options and associated code to write the output of running the profiler to an InfluxDB instance, so we can create graphs like [1] with Grafana.
This is part of the work required to record and watch PWM results during CI to catch performance regressions.
[1] https://screenshots.firefox.com/j6sSZrN7pTuPK2kX/localhost
Source-Repo: https://github.com/servo/servo
Source-Revision: 901525c9116ee0945781811c97fd3395db7c5cf9
- [x] `./mach build -d` does not report any errors (kinda, need webrender published and Cargo.toml fixed up)
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because it is a refactoring in which the difference is mostly a compile-time/strong-typing thing with no change to the logic.
Source-Repo: https://github.com/servo/servo
Source-Revision: 18653f69581693a5bae1ce4e350e78bc16159b08
<!-- Please describe your changes on the following line: -->
1. Move the logic of computing the initial url from `opts.rs` to `/ports/servo/main.rs`
2. Add a `ServoUrl` argument to `Browser::new`
Based on the requested changes by @paulrouget:
>We can read the pref in main() instead. shell.homepage would be used if the url is not passed as an argument. I'm trying to decouple the "app" logic and the "web engine" logic. I think it's up to the app to set the initial URL, and I'm not sure the initial url should be part of opts.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#15636
<!-- Either: -->
- [ ] There are tests for these changes
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 87140641a4f8636b431db41777d01302f8f6ad3d
The DebugOpts struct uses the Default trait to set all the values
to false initialily. So bools in the DebugOpts struct must be
negative verbs to work correctly.
This drops the draw call count on HN from ~2000 back to ~5.
Source-Repo: https://github.com/servo/servo
Source-Revision: bb310efbb9e84cf0bd44170c4e08bac664f0ce86
<!-- Please describe your changes on the following line: -->
This new debug option exposes https://github.com/servo/webrender/pull/1186
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because _____ it's a debug option
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b42ee29c1bc66484406c289c70aa5c4795728743
Without this, initializing Servo without using the command line (when embedded) requires to explicitly set `opts.headless = false`, which is weird as it's the only option that needs to be changed.
Source-Repo: https://github.com/servo/servo
Source-Revision: d1eef9d08a4dc3c7ff057797281d2b4f8d4f71c7
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#15963 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 9a419ec3d50436b3a91227880114d9985f2097e7
No doubt there are still some bugs and missing features related to subpixel text anti-aliasing.
But enabling by default should allow us to detect these and fix them.
If we run into any major issues, this is a standalone commit that can be reverted while we fix the problem.
Source-Repo: https://github.com/servo/servo
Source-Revision: 4e390e2630f244e77032ded404ca885c3e3ed8a7
<!-- Please describe your changes on the following line: -->
Remove paint_threads from `ports/cef/core.rs` and `components/config/opts.rs`
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#16716
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: c171ded902f60132e2e99e72a075afd63d0df4b5
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14824
Source-Repo: https://github.com/servo/servo
Source-Revision: bc9d7863b6763e59f7efed3d5c9870b19bafb195
This was used by the old compositor of which only the ghostly echoes of
old commits remain. Since it's been unused for quite some time, it is
probably safe to remove it.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because they do not change functionality.
<!-- Also, please make sure that "Allow edits from maintainers" checkbox is checked, so that we can help you if you get stuck somewhere along the way.-->
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: bbfaa2316af669e38366028d75d9e8102cc90f1f
It seems mod attr is not used for geckolib at all, and that is the only place where servo_url is still referenced for geckolib, so we can just remove it.
Source-Repo: https://github.com/servo/servo
Source-Revision: 12a4cc875d44a1a516412dc4c6044e897c0c6e47
This is based on #15158 by @aneeshusa, with additional reverts.
This reverts #15064, which is causing many tests not to run, and #15129 and #15155 which landed while tests were not running and may have caused some new failures in iframe tests.
Source-Repo: https://github.com/servo/servo
Source-Revision: 185759f87a8dec88f5f65c49ac9df90b47014b19
Also remove the obsolete `--cpu` and `--gpu` renderer flags,
which also are no longer used.
Update tests and wptrunner to not pass these flags.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13761 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because the tests are updated to no longer pass these flags
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: bb24fd3177cd69931d6a894bfcbb605286cefa1e
<!-- Please describe your changes on the following line: -->
Converted document discarding from an opt into a pref. Updated testing docs and changed all uses to pref api.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14960 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because current test suite is sufficient
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: d09bf70d220262e2c199abf61b4b78b7137d6665
<!-- Please describe your changes on the following line: -->
Oops, indexed from the wrong end when discarding documents in #14312.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes do not require tests because we're not testing document discarding
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7f9fd0ec1fe70b491d18e99f68988c1381615810
I'm not sure as I'm new with servo but shouldn't the new function ```parse_opt_prefs``` be in ```prefs.rs``` instead of ```opts.rs``` ?
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14842
<!-- Either: -->
- [X] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 42e28bf7e59e0c7fab7163326d7374d1c4e268d1
<!-- Please describe your changes on the following line: -->
This PR implements document discarding. Active documents are kept alive strongly, but inactive documents are only kept alive weakly. When a document is GCd, it is marked as discarded, and if it is every reactivated, a reload of the URL is triggered.
Note that this PR is pretty aggressive about discarding, and can any inactive document (other than those being kept alive by other same-origin pipelines). We might want to damp it down a bit.
Also note that this interacts with browser.html in that the reloading triggered by reactivating a document triggers mozbrowser events.
To test this, I added a `-Zdiscard-inactive-documents` debug flag, which discards all inactive documents, even ones which are reachable through other same-origin pipelines.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#14262.
- [X] These changes do not require tests because we should be able to use the existing tests with `-Zdiscard-inactive-documents`.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 16b0da5004fd730de87883daa35a78b6af01f042
<!-- Please describe your changes on the following line: -->
This PR removes the `util` crate.
* Replaced the `spawn_named` and `clamp` functions by appropriate uses of `std:🧵:Builder::spawn`, `std::cmp::min` and `std::cmp::max`.
* Moved `opts`, `prefs` and `resource_files` into a new `config` crate.
* Moved `remutex` and `geometry` into their own crates.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes do not require tests because they are refactorings
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 4eb653817f87e5fb47de34356f558eb76ecbca9f
