<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because this PR should not change behavior.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Layers were a feature of the legacy drawing path. If we re-add them at
some point, it probably makes more sense to make them a product of
display list inspection.
This change also remove a bunch of dead painting code.
Source-Repo: https://github.com/servo/servo
Source-Revision: bb271ef4afea02b6b1b5d207e773d1fedccd2906
Improve the experience of using webdriver to take screenshots of Servo. When a screenshot can't be obtained immediately, increase the delay before trying again from 2ms to 1s.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#13826
- [X] These changes do not require tests because we can't test webdriver yet.
Source-Repo: https://github.com/servo/servo
Source-Revision: 350c60b62d077cb19c4bd2cb7433c18ca08791bd
This removes paint threads, rust-layers dependency, and changes
optional webrender types to be required.
The use_webrender option has been removed, however I've left
the "-w" command line option in place for now so that wpt
runner can continue to pass that. Once it's removed from there
we can also remove the -w option.
Once this stage is complete, it should be fine to change the
display list building code to generate webrender display
lists directly and avoid the conversion step.
Source-Repo: https://github.com/servo/servo
Source-Revision: f96718d03da969510dc992699cb6f25c2e21ae1e
<!-- Please describe your changes on the following line: -->
Allow setting a devtools timeline marker to fail, due to pipeline lookup failure. This is part of tidying up pipeline lookup.
cc @jdm
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes do not require tests because I'm not sure how to test devtools.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: bb75e2e727eae64477c128ace7bd5cff35e0ea81
Globals in that PR are now represented by the fake IDL interface `GlobalScope`.
Source-Repo: https://github.com/servo/servo
Source-Revision: a6e4b5bb86ad707a0863acff87344ca4239cfd2c
Remove the ignore-heap-size comment to enable the memory measurement.
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#6909
- [x] These changes do not require tests because they just enabled memory measurement
@jdm the build fails, and I'm not so sure why. Assistance please? 😄
Source-Repo: https://github.com/servo/servo
Source-Revision: 36222cf543731af71b22d5fb8e3f17c6c51af895
<!-- Please describe your changes on the following line: -->
This PR implements the fetch method, which is described in [the Fetch Spec](https://fetch.spec.whatwg.org/#fetch-method). The expected wpt results are updated as well.
A few comments about the current fetch implementation:
- The fetch method manually calls `JSAutoCompartment` in order to prevent SpiderMonkey from crashing. This may have to change in the future.
- Not all `FetchResponseListener` methods are implemented.
- `net_traits::CoreResourceMsg::Fetch` message takes a `net_traits::request::RequestInit`. However, when the fetch method is called, a `RequestBinding::RequestInit` is given. The fetch method constructs a `dom::request::Request` with the given `RequestInit`, then creates `net_traits::request::RequestInit` from the dom Request object for the fetch message.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#11898 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 5996e008a34dd92602acb7bbd3ea41a880053110
According to https://w3c.github.io/webappsec-referrer-policy/#referrer-policy-delivery, there's `<a>`, `<link>` and `<area>` could apply this delivery method. This PR contains changes for `<a>` and `<link>` **but** not `<area>`, since HTMLAreaElement is barely implemented.
We should file another issue for it.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#11862
- [X] There are tests for these changes
Source-Repo: https://github.com/servo/servo
Source-Revision: 8a78e75d4314aa5ac770ec070a6ea7eed341e3ec
<!-- Please describe your changes on the following line: -->
This PR adds a replacement option when navigating. It replaces the current session history entry after a new page has been loaded. This will prevent reloading from adding a new entry to the session history.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#13123 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 9876923b29ae7c4f2b763e368fc34fe8a051afc4
<!-- Please describe your changes on the following line: -->
SubpageId was originally introduced in 2013 to help iframes keep track of
their associated (children) pipelines. However, since each pipeline
already has a PipelineId, and those are unique, those are sufficient
to keep track of children.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#11694 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because refactoring
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 161e0741cd4942d337b8d0fca2e0eaa86482ad9a
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13131
<!-- Either: -->
- [x] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
r? @pcwalton
Source-Repo: https://github.com/servo/servo
Source-Revision: acb47007ba9494c73272494efe9ebd2c05e4c014
Changed starting line of script to line 1 instead of line 0
---
- [ ] `./mach build -d` fails, but it fails on master on my system too due to some sort of problem with cygwin
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#12996
Source-Repo: https://github.com/servo/servo
Source-Revision: a20d7102610dc35c7a5ec8ce64a157e32b4b7dbb
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#12763 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 9b4b94aa755a04d4b9c9703574b01c03ad25a788
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#12749 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
The script tick ends up only processing JS callbacks related to animation
frames, so CSS transitions/animations end up not working as expected.
This could have accidentally worked before #12563 because we over-restyled, but
now this is no longer the case.
Other possible way to do it is making a layout reflow with RAF handle CSS
animations/transitions too, but that may not work if the reflow ends up being
suppressed (that could very well be the case), and we'd need to handle a lot
more state in the document, so this solution (assuming it doesn't break try)
seems a bit less flacky.
Missing a test, will add one soon. Fixes#12749.
Source-Repo: https://github.com/servo/servo
Source-Revision: 0b9832119e9d42bc3ba4d8e4a4e573a03705de3e
Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data:
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
Either:
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process.
Source-Repo: https://github.com/servo/servo
Source-Revision: 504954890e406b6e735fb17caa8e3454b17b8208
This commit adds hooks to the Servo style traversal to avoid traversing all the
DOM for every restyle. Additionally it changes the behavior of the dirty flag to
be propagated top down, to prevent extra overhead when an element is dirtied.
This commit doesn't aim to change the behavior on Servo just yet, since Servo does extra job when dirtying the node related with DOM revision counters that might be necessary.
CC @asajeffrey for the DOM revision counters stuff. When a node is dirty, do all its descendants really need to increment the revision counter, or is this an unintended effect? My intuition is that this is hurting performance quite a lot for servo.
r? @bholley
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [x] These changes do not require tests because no geckolib tests yet.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 944d371b8f0e72f6aa5465be38c0c8daeab66127
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [X] These changes do not require tests because only add support for Windows
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 2de3b119a961942943280fa280c50a7a814de583
<!-- Please describe your changes on the following line: -->
r? @asajeffrey
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#5670 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
implement go, forward, back
Source-Repo: https://github.com/servo/servo
Source-Revision: 0e887ca8d3327b63db43cc329dd83bf4c02e2a1c
<!-- Please describe your changes on the following line: -->
Remove the previous ad hoc panic channel, replace it by an integrated logging and panicking mechanism, including crash reporting. All thread panics are now reported, not just content threads.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#11838
- [X] These changes do not require tests because we don't test error reporting
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: df1b00d43db615244e8e4bcf8296ed51b64249ea
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#12120
<!-- Either: -->
- [x] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
r? @SimonSapin for the style changes, @Ms2ger or @jdm for the dom and test changes
Source-Repo: https://github.com/servo/servo
Source-Revision: 14aeccc33ab44d706df86fbce67339218efe710c
<!-- Please describe your changes on the following line: -->
Allow mozbrowser events, in particular mozbrowsererror events, to target a window. Needed for https://github.com/browserhtml/browserhtml/issues/1182
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#12420
- [X] These changes do not require tests because we're not testing our issue reporting system, which this is intended for.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b6c0ed9a44b076928ea816ca529702eec25d0029
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes are part of #11091
<!-- Either: -->
- [X] There are tests for these changes at my [gh-pages](https://github.com/creativcoder/gsoc16/tree/gh-pages) branch to test the instantiation of service workers by their manager, but will need to discuss how that would integrate into master.
Changes:
- Introduces a `ServiceWorkerManager`, which maintains an map of registered service workers as well as a map of active workers keyed by their `scope_url`.
- Adds the initialization of ServiceWorkerManager, at the `script::init()`, which makes it available as a single entity listening for requests from different script threads.
- Adds a timeout thread in `serviceworkerglobalscope`, which terminates the workers, after a timeout of 60 secs, thereby removing it from the active workers list.
- Adds the matching of scope urls, in longest prefix way rather than path structural way, according to [spec](https://slightlyoff.github.io/ServiceWorker/spec/service_worker/#scope-match-algorithm).
- Make ServiceWorkerManager, the holder of network sender, instead of script thread, so it can send `CustomResponse`.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 513811f6b40d522bc425c2588320b889614f2973
Implement the task source API for the File Reader task source, enabling using task sources from non-main threads.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix (partially) #7959 (github issue number if applicable).
- [X] These changes do not require tests because they're refactoring existing code
Source-Repo: https://github.com/servo/servo
Source-Revision: 48a912f57ec51e55e7905983b2bf368a07a9902f
<!-- Please describe your changes on the following line: -->
This keeps scripts from executing after its script thread has been shut down.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [x] These changes fix (maybe) #12048 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 12260b24d0e97ee33116d4b730203e5a2619a499
<!-- Please describe your changes on the following line: -->
Added toggling of active state for element and parents on mousedown/mouseup. Active state is removed when mouseout. (hover)
- As with my other PR i'm struggling a bit with the automated testing. I've added a manual test case and found quirks-mode/active-and-hover-manual.html which - aside from also being a manual test, is functional in Firefox but does not render correctly in Servo.
- Not implemented: In Firefox, behaviour differs with a <!DOCTYPE HTML> and an anchor does not lose it's activation on mouseout; whereas a button does.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#8719 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 5afdf7fb5c9a4c997a287f6d61ec05857f073ce2
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b0a8ce5341f5148e36523fee0b0fcbc2684c0a68
Fix the biggest cause of #6462 by wrapping lots of JS->Rust transitions in catch_panic, and calling resume_panic after all Rust->JS transitions return.
Known issue:
* Finalizers can be called in response to any JS engine allocation that triggers a GC, so it's possible for a Rust object's Drop implementation that panics to leave an interrupted panic in TLS. This is why 30d8009 is part of this PR; the underlying problem is that there's no clear place to resume the panic after it is interrupted.
---
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#6462 (github issue number if applicable).
- [X] There are tests for these changes OR
Source-Repo: https://github.com/servo/servo
Source-Revision: 87d991ebd24886051ad1131bdbe3b9019cb1c4b3
r? @Manishearth
Implement the two functions in `URL` to create/revoke Blob URLs, and related code to approximate our proposed design to make things work together.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix part of #10539, related to #11131
<!-- Either: -->
- [x] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 0c9d0eb68575f20a8239bac8204f8e25de0f61d2
This addresses #9566 and a good part of #9751, specifically:
* Pipeline has a notion of visibility
* IFrame setVisible/getVisible interface with IFrame's pipeline visibility
* IFrame mozbrowservisibilitychange responds to changes in visibility
* Pipeline visibility is used to limit animations (requestAnimationFrame does not tick animations when hidden) and to increase timer intervals (currently set to a minimum of 1 second while hidden)
Absent for now are any changes to the Document API and general implementation of the Page Visibility API, since the more interesting parts require knowledge of whether the user agent is minimized, OS screen locked, etc.
cc @paulrouget @jdm
Source-Repo: https://github.com/servo/servo
Source-Revision: d620ab71c41431c3fb040162f554faefb9abfbd7
Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data:
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy --faster` does not report any errors
- [x] These changes fix#10965 (github issue number if applicable).
Either:
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process.
Source-Repo: https://github.com/servo/servo
Source-Revision: 08a55e29511a2b26b7ae26ebb0b9271f80e2a7bd
<!-- Please describe your changes on the following line: -->
Got `window.top` and `window.parent` to return the right result inside a `mozbrowser` iframe.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] There are tests for these changes
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 280bfc961a013bec58ba23d756db002b3e44fdef
Spec: https://w3c.github.io/FileAPI/#BlobURLStore.
I finally decide to put the store under `ScriptThread` and interpret the "global object" as the script thread itself. The new APIs will be used during the page loading (if scheme is `blob`) and `URL.createObjectURL/revokeObjectURL`.
Related to #11131.
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix part of #10539
<!-- Either: -->
- [x] These changes do not require tests because it is new stub code which needs further integrating PRs.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: b389ecda67d834de1893c6e7a118c0f0fd713b8c
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes do not require tests because removing unused imports
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 4e277d74e83bf9c3e1d237d1f779753c4c6a3a6e
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes do not require tests because refactoring
Source-Repo: https://github.com/servo/servo
Source-Revision: e8cf789fc56dfbc4bfd6145d3bd1a30aa9459c95
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#11223
<!-- Either: -->
- [ ] There are tests for these changes.
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
This fixes#11223.
Note that this didn't happen in the root pipeline because we explicitly set the
window size in that case.
Source-Repo: https://github.com/servo/servo
Source-Revision: 4c8c57992b9addb8d45a1f1f5593f7490d975734
This happens asynchronously, just as it does in non-WebRender mode.
This functionality is a prerequisite for doing proper display-list-based
hit testing in WebRender, since it moves the scroll offsets into Servo
(and, specifically, into the script thread, enabling iframe event
forwarding) instead of keeping them private to WebRender.
Requires servo/webrender_traits#55 and servo/webrender#277.
Partially addresses #11108.
r? @glennw
Source-Repo: https://github.com/servo/servo
Source-Revision: 27d1f182713077395426a53a9c91ec35c95887ee
