Use enum BorderWidth instead of a tuple-like struct to store the specified
value. BorderWidth is needed to be used in both longhand and shorthand
border width properties, so I put it in `specified` module.
Fixed#13869.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#13869 (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 357e746a9a37a68604fe5ae1c3fb30334f75b4ac
<!-- Please describe your changes on the following line: -->
… so that Stylo can re-use it.
Fixes https://bugzilla.mozilla.org/show_bug.cgi?id=1295865
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because refator
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 626d093245066755c751510d2c09a9b864b129fd
Globals in that PR are now represented by the fake IDL interface `GlobalScope`.
Source-Repo: https://github.com/servo/servo
Source-Revision: a6e4b5bb86ad707a0863acff87344ca4239cfd2c
<!-- Please describe your changes on the following line: -->
As discussed in https://bugzilla.mozilla.org/show_bug.cgi?id=1305141Closes#13176
---
Original PR title: Stop relying on `impl<T: HeapSizeOf> HeapSizeOf for Arc<T>`
https://github.com/servo/heapsize/issues/37#issuecomment-249861171
This builds on top of that.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because refactor
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: aea9545e16fd6ea4a6b1234d1b969457313a5fa7
<!-- Please describe your changes on the following line: -->
Add methods to activatable elements; gated by a preference, for use in servo-specific WPT tests.
I cargo-culted over the "redundant check" from #12322, I don't really understand the possible exploit.
Obvious flaw is the copypasta for each element. I understand that the webidl codegen will produce a trait for ActivatableElement, but I can't see how I can provide a default implementation for this? I guess otherwise could be an improvement to have each element just delegate to an Enter.../Exit... method on the Activatable trait?
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#12343 (github issue number if applicable).
<!-- Either: -->
- [X] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
…states
Source-Repo: https://github.com/servo/servo
Source-Revision: 2fb4dd9ec3bb4be7d5ea8404964536c89fc8732b
<!-- Please describe your changes on the following line: -->
Since #13134, the "normal" and "important" parts of `Stylist` are identical, so we don’t need to store them twice.
r? @emilio
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 89126b44d74ac49e7e05d8a127020aa39de0d30e
<!-- Please describe your changes on the following line: -->
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
<!-- Either: -->
- [x] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Depends on https://github.com/servo/rust-selectors/pull/98
Source-Repo: https://github.com/servo/servo
Source-Revision: 57b372ba3bfc8c1c99c541be8d68fac93deb41ca
<!-- Please describe your changes on the following line: -->
`DOMRefCell` usage is not there year because of thread-safety questions, but I have this much already that I’d like to land before it bitrots.
r? @emilio
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require new tests because refactor
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: bbfe38e35f3f6a51009c0411647c89c8b5616357
(Commits do not build individually, but split up for review)
These patches make all of the background- properties accept multiple values, and add the layout code to display them.
Still needs some cleanup, and some testing, but it seems to work.
r? @SimonSapin
Source-Repo: https://github.com/servo/servo
Source-Revision: c5e81f836190ea64df95f67c922b8421a4d2ff78
<!-- Please describe your changes on the following line: -->
Track only the number of important declarations in a declaration block
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#12959 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because "the existing tests should cover it"
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 57340e43107e6be5c3ff7fb379c4571b8ae1561b
Have a single Vec instead of two. Fix#3426
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#3426.
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: f8b2be1ea4d844d5bddd88df2e5db42731bd6a39
<!-- Please describe your changes on the following line: -->
r? @emilio
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [x] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 07b217368f6f2ec35450edab9c6c29091aa16433
This removes the `[replace]` override in geckolib and therefore unblocks https://github.com/servo/servo/pull/12391.
This includes the `gecko_string_cache` redesign discussed in https://github.com/servo/servo/pull/12548.
r? @bholley
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy` does not report any errors
- [x] These changes fix#12548 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [x] These changes do not require new tests because refactor
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 5e83b3f83bfcf48d0096442bdf5c9bf753623970
Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data:
- [x] `./mach build -d` does not report any errors
- [X] `./mach test-tidy --faster` does not report any errors
- [X] These changes fix#1471 (github issue number if applicable).
Either:
- [X] These changes do not require tests because no new functionality was added, just a reorganization and caching of existing functionality
Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process.
Source-Repo: https://github.com/servo/servo
Source-Revision: 1837fcbedde8bb1bab7610d131aed0fd3e4f1462
<!-- Please describe your changes on the following line: -->
Add the target pseudo selector and set/unset it during scrolling to fragment. This change is not complete as no repaint is triggered after the selector is added - it will only take effect after a repaint is triggered by e.g. hovering over another element. (See manual test)
I would like some help because i'm not sure how to resolve this; I can only think to call window.reflow.
I added a manual test case, don't think this counts really! I think the applicable automated test is in /tests/wpt/web-platform-tests/dom/nodes/Element-matches.html but it currently fails, I think due to the above.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#7720 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 7a7bdf51adc3c5051f93c8044797c8fcaf89953c
<!-- Please describe your changes on the following line: -->
This stores a `UrlExtraData` object in `specified::Image::Url` and `computed::Image::Url`, so that geckolib can use the base/principal to create Gecko `ImageValue`s. (I'll do that in the followup to support background-image; want to get this in first.)
r? @Manishearth
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [X] These changes do not require tests because existing tests should be sufficient
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 11ad48f8e3ff12f30ef2708ae87d7ad09277e5bf
<!-- Please describe your changes on the following line: -->
Added toggling of active state for element and parents on mousedown/mouseup. Active state is removed when mouseout. (hover)
- As with my other PR i'm struggling a bit with the automated testing. I've added a manual test case and found quirks-mode/active-and-hover-manual.html which - aside from also being a manual test, is functional in Firefox but does not render correctly in Servo.
- Not implemented: In Firefox, behaviour differs with a <!DOCTYPE HTML> and an anchor does not lose it's activation on mouseout; whereas a button does.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#8719 (github issue number if applicable).
<!-- Either: -->
- [ ] There are tests for these changes OR
- [ ] These changes do not require tests because _____
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 5afdf7fb5c9a4c997a287f6d61ec05857f073ce2
This marshaling is slow, because Gecko stores attributes as UTF-16 and does not atomize them in all cases, and it turns out that the need for them in Servo is pretty minimal. With some refactoring across servo and rust-selectors we can fix this.
Source-Repo: https://github.com/servo/servo
Source-Revision: abdf2f28a0bd25a76a31b4fd2410c7a87448ed54
- [x] These changes fix#4431.
- [x] `./mach build -d` does not report any errors
- [x] `./mach test-tidy --faster` reports one error for the `css_properties_accessors!` macro not having a spec link
```
$ git log -1 --format=oneline
91fb9bf1d388c3ede304a5d649dd21fe975787b0 fixup! implement cssText
$ ./mach build -d
Compiling style v0.0.1 (file:///Users/greg/servo/components/style)
Compiling gfx v0.0.1 (file:///Users/greg/servo/components/gfx)
Compiling script v0.0.1 (file:///Users/greg/servo/components/script)
Compiling layout_traits v0.0.1 (file:///Users/greg/servo/components/layout_traits)
Compiling compositing v0.0.1 (file:///Users/greg/servo/components/compositing)
Compiling glutin_app v0.0.1 (file:///Users/greg/servo/ports/glutin)
Compiling constellation v0.0.1 (file:///Users/greg/servo/components/constellation)
Compiling layout v0.0.1 (file:///Users/greg/servo/components/layout)
Compiling servo v0.0.1 (file:///Users/greg/servo/components/servo)
Build completed in 0:05:11.475584
$ ./mach test-tidy --faster
Checking files for tidiness...
./components/script/dom/cssstyledeclaration.rs:386: method declared in webidl is missing a comment with a specification link
Progress: 100% (12/12)
```
- [x] There are tests for these changes. More CSSOM tests pass, but others fail that probably shouldn't:
* `./mach test-css tests/wpt/css-tests/cssom-1_dev/html/index-002.htm` and a bunch of the other tests in `/css-tests/cssom-1_dev/html/ crash when run individually
* `./mach test-css tests/wpt/css-tests/cssom-1_dev/html/cssom-cssText-serialize.htm` fails to strip a trailing semicolon (`left: 10px` vs `left: 10px;`)
* `./mach test-css tests/wpt/css-tests/cssom-1_dev/html/index-001.htm` shared shorthand values aren't coalesced (`margin: 20px` vs. `margin: 20px 20px 20px 20px`)
* `./mach test-css tests/wpt/css-tests/cssom-1_dev/html/cssstyledeclaration-csstext.htm` also crashes and fails for `color: red;` vs. `color: RED;`, preserving declaration insertion order, whitespace in the value, and setting an unknown style property.
Source-Repo: https://github.com/servo/servo
Source-Revision: 09e6f4ac546a77294d9af7fe0ff0bc344be8de91
This automates something that I find myself frequently commenting on in PRs.
---
<!-- Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data: -->
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] There are tests for these changes OR
<!-- Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process. -->
Source-Repo: https://github.com/servo/servo
Source-Revision: 3ec20d9cf517c67f4d280e8958cc58c4c2b4fbb2
Thank you for contributing to Servo! Please replace each `[ ]` by `[X]` when the step is complete, and replace `__` with appropriate data:
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy --faster` does not report any errors
- [ ] These changes fix #__ (github issue number if applicable).
Either:
- [ ] There are tests for these changes OR
- [x] These changes do not require tests because changes target stylo
Pull requests that do not address these steps are welcome, but they will require additional verification as part of the review process.
Source-Repo: https://github.com/servo/servo
Source-Revision: 2a2b88f42c55614f949f218b0444778e8e2bfc78
- [X] `./mach build -d` does not report any errors
- [X] `./mach test-tidy` does not report any errors
- [X] These changes fix#11185
- [X] These changes do not require tests because it only removes dead code.
----
This fixes#11185.
Source-Repo: https://github.com/servo/servo
Source-Revision: 2c674d0397927ef6563feb70e54f46815af55600
Fixes#10748 .
Implement Element::hasAttributes. I'm not sure if tests are enough. I'm open to suggestion :)
Source-Repo: https://github.com/servo/servo
Source-Revision: 8163347e347996f0337086f605d74ce19b4930d0
This is a work in progress to solve https://github.com/servo/servo/issues/9650. Thanks a lot for helping the review.
- [x] scroll
- [x] scrollTo
- [x] scrollBy
- [x] scrollTop (setter and getter)
- [x] scrollLeft (setter and getter)
The setters will be implemented in another PR after this is merged.
Source-Repo: https://github.com/servo/servo
Source-Revision: 8d988f20c12e0a5267e79650a90310951c66ca77
Second take of #6303, now that the `base_url` infrastructure is in place.
Source-Repo: https://github.com/servo/servo
Source-Revision: c4e112a3be6930e6373483f6e42279d0682b3a48
Add the `scrollWidth` and `scrollHeight` extensions to the element interface. My goal was to create a method that encompassed getting `scrollWidth`, `scrollHeight`, `scrollTop`, and `scrollLeft`.
I also noted that `clientHeight` and `clientWidth` to not handle the root element and the body element correctly.
Source-Repo: https://github.com/servo/servo
Source-Revision: 7ff7932a8cb15c42a436958e953cc904ba7a0bd8
